diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 16 |
1 files changed, 2 insertions, 14 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 2ff7b7bf..1591c88d 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -322,22 +322,10 @@ config section). If MOTION_QUEUE is an empty string then the stepper will be desynchronized from all extruder movement. #### SET_EXTRUDER_STEP_DISTANCE -`SET_EXTRUDER_STEP_DISTANCE EXTRUDER=<config_name> -[DISTANCE=<distance>]`: Set a new value for the provided extruder's -"step distance". The "step distance" is -`rotation_distance/(full_steps_per_rotation*microsteps)`. Value is not -retained on Klipper reset. Use with caution as small changes can -result in excessive pressure between extruder and hot end. Do proper -calibration with filament before use. If 'DISTANCE' value is not -included command will return current step distance. +This command is deprecated and will be removed in the near future. #### SYNC_STEPPER_TO_EXTRUDER -`SYNC_STEPPER_TO_EXTRUDER STEPPER=<name> EXTRUDER=<name>`: This -command will cause the given extruder STEPPER (as specified in an -[extruder](Config_Reference#extruder) or -[extruder stepper](Config_Reference#extruder_stepper) config section) -to become synchronized to the given EXTRUDER. If EXTRUDER is an empty -string then the stepper will not be synchronized to an extruder. +This command is deprecated and will be removed in the near future. ### [fan_generic] |