diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 43a3ae85..31ada1c3 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -44,9 +44,9 @@ possible G-Code command. Instead, Klipper prefers human readable If one requires a less common G-Code command then it may be possible to implement it with a custom Klipper gcode_macro (see -[example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) -for details). For example, one might use this to implement: `G12`, -`G29`, `G30`, `G31`, `M42`, `M80`, `M81`, `T1`, etc. +[config reference](Config_Reference.md#gcode_macro) for details). For +example, one might use this to implement: `G12`, `G29`, `G30`, `G31`, +`M42`, `M80`, `M81`, `T1`, etc. ## G-Code SD card commands @@ -320,9 +320,7 @@ enabled: [SAMPLES_RESULT=median|average]`: Move the nozzle downwards until the probe triggers. If any of the optional parameters are provided they override their equivalent setting in the probe config section - (see - [example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) - for details). + (see [config reference](Config_Reference.md#probe) for details). - `QUERY_PROBE`: Report the current status of the probe ("triggered" or "open"). - `PROBE_ACCURACY [PROBE_SPEED=<mm/s>] [SAMPLES=<count>] @@ -622,15 +620,17 @@ been enabled: The following command is enabled if an [input_shaper] config section has been enabled: - `SET_INPUT_SHAPER [SHAPER_FREQ_X=<shaper_freq_x>] - [SHAPER_FREQ_Y=<shaper_freq_y>] [DAMPING_RATIO_X=<damping_ratio_x>] + [SHAPER_FREQ_Y=<shaper_freq_y>] + [DAMPING_RATIO_X=<damping_ratio_x>] [DAMPING_RATIO_Y=<damping_ratio_y>] [SHAPER_TYPE=<shaper>] - [SHAPER_TYPE_X=<shaper_type_x>] [SHAPER_TYPE_Y=<shaper_type_y>]`: Modify - input shaper parameters. Note that SHAPER_TYPE parameter resets input shaper - for both X and Y axes even if different shaper types have been configured - in [input_shaper] section. SHAPER_TYPE cannot be used together with either - of SHAPER_TYPE_X and SHAPER_TYPE_Y parameters. See - [example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) - for more details on each of these parameters. + [SHAPER_TYPE_X=<shaper_type_x>] [SHAPER_TYPE_Y=<shaper_type_y>]`: + Modify input shaper parameters. Note that SHAPER_TYPE parameter + resets input shaper for both X and Y axes even if different shaper + types have been configured in [input_shaper] section. SHAPER_TYPE + cannot be used together with either of SHAPER_TYPE_X and + SHAPER_TYPE_Y parameters. See + [config reference](Config_Reference.md#input_shaper) for more + details on each of these parameters. ## Temperature Fan Commands |