diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index d507d81a..dbc8d7d2 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -1396,19 +1396,23 @@ software dependencies must be installed; refer to ## [board_pins] -Board pin aliases. One may define aliases for the pins on a -micro-controller. (If a micro-controller name is omitted in the -board_pins config section name then it defaults to "mcu".) +Board pin aliases (one may define any number of sections with a +"board_pins" prefix). Use this to define aliases for the pins on a +micro-controller. ``` -[board_pins mcu] +[board_pins my_aliases] +mcu: mcu +# A comma separated list of micro-controllers that may use the +# aliases. The default is to apply the aliases to the main "mcu". aliases: +aliases_<name>: # A comma separated list of "name=value" aliases to create for the # given micro-controller. For example, "EXP1_1=PE6" would create an # "EXP1_1" alias for the "PE6" pin. However, if "value" is enclosed # in "<>" then "name" is created as a reserved pin (for example, -# "EXP1_9=<GND>" would reserve "EXP1_9"). This parameter must be -# provided. +# "EXP1_9=<GND>" would reserve "EXP1_9"). Any number of options +# starting with "aliases_" may be specified. ``` ## [include] |