diff options
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 25e7cc46..24139183 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2065,6 +2065,14 @@ in this section (CARRIAGE=0 will return activation to the primary carriage). Dual carriage support is typically combined with extra extruders - the SET_DUAL_CARRIAGE command is often called at the same time as the ACTIVATE_EXTRUDER command. Be sure to park the carriages during deactivation. +Note that during G28 homing, typically the primary carriage is homed first +followed by the carriage defined in the `[dual_carriage]` config section. +However, the `[dual_carriage]` carriage will be homed first if both carriages +home in a positive direction and the [dual_carriage] carriage has a +`position_endstop` greater than the primary carriage, or if both carriages home +in a negative direction and the `[dual_carriage]` carriage has a +`position_endstop` less than the primary carriage. + Additionally, one could use "SET_DUAL_CARRIAGE CARRIAGE=1 MODE=COPY" or "SET_DUAL_CARRIAGE CARRIAGE=1 MODE=MIRROR" commands to activate either copying or mirroring mode of the dual carriage, in which case it will follow the |