diff options
Diffstat (limited to 'config')
24 files changed, 24 insertions, 24 deletions
diff --git a/config/generic-archim2.cfg b/config/generic-archim2.cfg index 8b159b14..a517909b 100644 --- a/config/generic-archim2.cfg +++ b/config/generic-archim2.cfg @@ -129,7 +129,7 @@ max_temp: 130 [fan] pin: PC26 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PC25 [mcu] diff --git a/config/generic-bigtreetech-e3-rrf-v1.1.cfg b/config/generic-bigtreetech-e3-rrf-v1.1.cfg index 557009ee..b0153cba 100644 --- a/config/generic-bigtreetech-e3-rrf-v1.1.cfg +++ b/config/generic-bigtreetech-e3-rrf-v1.1.cfg @@ -90,7 +90,7 @@ pid_Kd: 948.182 min_temp: 0 max_temp: 130 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PB6 [fan] diff --git a/config/generic-bigtreetech-skr-e3-turbo.cfg b/config/generic-bigtreetech-skr-e3-turbo.cfg index 1974afdb..4784a654 100644 --- a/config/generic-bigtreetech-skr-e3-turbo.cfg +++ b/config/generic-bigtreetech-skr-e3-turbo.cfg @@ -105,7 +105,7 @@ max_temp: 130 [fan] pin: P2.1 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: P2.2 [mcu] diff --git a/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg b/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg index 96605da1..eeacae33 100644 --- a/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg +++ b/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg @@ -100,7 +100,7 @@ pid_Kd: 948.182 min_temp: 0 max_temp: 130 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PC7 [fan] diff --git a/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg b/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg index ed37afbd..2ea064b0 100644 --- a/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg +++ b/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg @@ -98,7 +98,7 @@ pid_Kd: 948.182 min_temp: 0 max_temp: 130 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PC7 [heater_fan controller_fan] diff --git a/config/generic-bigtreetech-skr-mini-mz.cfg b/config/generic-bigtreetech-skr-mini-mz.cfg index 15f32864..92afc779 100644 --- a/config/generic-bigtreetech-skr-mini-mz.cfg +++ b/config/generic-bigtreetech-skr-mini-mz.cfg @@ -103,7 +103,7 @@ pid_Kd: 948.182 min_temp: 0 max_temp: 130 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PC7 [fan] diff --git a/config/generic-bigtreetech-skr-pico-v1.0.cfg b/config/generic-bigtreetech-skr-pico-v1.0.cfg index 83f89d65..06a0c9f7 100644 --- a/config/generic-bigtreetech-skr-pico-v1.0.cfg +++ b/config/generic-bigtreetech-skr-pico-v1.0.cfg @@ -100,7 +100,7 @@ max_temp: 130 [fan] pin: gpio17 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: gpio18 [heater_fan controller_fan] diff --git a/config/generic-duet2-duex.cfg b/config/generic-duet2-duex.cfg index 38903ed2..e6357713 100644 --- a/config/generic-duet2-duex.cfg +++ b/config/generic-duet2-duex.cfg @@ -288,7 +288,7 @@ max_temp: 130 pin: PC23 # Fan1 controlled by extruder -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PC26 heater: extruder heater_temp: 45 diff --git a/config/generic-duet2-maestro.cfg b/config/generic-duet2-maestro.cfg index 82e57f72..c3618d78 100644 --- a/config/generic-duet2-maestro.cfg +++ b/config/generic-duet2-maestro.cfg @@ -123,7 +123,7 @@ max_temp: 130 [fan] pin: PC23 # FAN0 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PC22 # FAN1 #[heater_fan board_cooling_fan] diff --git a/config/generic-duet2.cfg b/config/generic-duet2.cfg index 79d3b324..fba45186 100644 --- a/config/generic-duet2.cfg +++ b/config/generic-duet2.cfg @@ -101,7 +101,7 @@ max_temp: 130 [fan] pin: PC23 # FAN0 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PC26 # FAN1 #[heater_fan board_cooling_fan] diff --git a/config/generic-einsy-rambo.cfg b/config/generic-einsy-rambo.cfg index 9015ae67..d532b8bf 100644 --- a/config/generic-einsy-rambo.cfg +++ b/config/generic-einsy-rambo.cfg @@ -95,7 +95,7 @@ max_temp: 130 [fan] pin: PH5 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PH3 [temperature_sensor board_sensor] diff --git a/config/generic-fysetc-cheetah-v1.2.cfg b/config/generic-fysetc-cheetah-v1.2.cfg index 1474b837..d2e3fb95 100644 --- a/config/generic-fysetc-cheetah-v1.2.cfg +++ b/config/generic-fysetc-cheetah-v1.2.cfg @@ -97,7 +97,7 @@ max_temp: 130 [fan] pin: PC8 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PB0 [mcu] diff --git a/config/generic-mini-rambo.cfg b/config/generic-mini-rambo.cfg index 21c999ac..61e2ac84 100644 --- a/config/generic-mini-rambo.cfg +++ b/config/generic-mini-rambo.cfg @@ -65,7 +65,7 @@ max_temp: 130 [fan] pin: PH5 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PH3 [mcu] diff --git a/config/generic-printrboard-g2.cfg b/config/generic-printrboard-g2.cfg index 356d93f6..ffbe80cd 100644 --- a/config/generic-printrboard-g2.cfg +++ b/config/generic-printrboard-g2.cfg @@ -104,7 +104,7 @@ max_temp: 290 [fan] pin: PB27 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PA6 [mcu] diff --git a/config/generic-radds.cfg b/config/generic-radds.cfg index f3cee435..f07f3cb4 100644 --- a/config/generic-radds.cfg +++ b/config/generic-radds.cfg @@ -81,7 +81,7 @@ max_temp: 130 [fan] pin: PC21 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PC22 [mcu] diff --git a/config/generic-rambo.cfg b/config/generic-rambo.cfg index 1686da25..8eb04c1f 100644 --- a/config/generic-rambo.cfg +++ b/config/generic-rambo.cfg @@ -75,7 +75,7 @@ max_temp: 130 [fan] pin: PH5 -#[heater_fan nozzle_cooling_fan] +#[heater_fan heatbreak_cooling_fan] #pin: PH3 [mcu] diff --git a/config/printer-eryone-er20-2021.cfg b/config/printer-eryone-er20-2021.cfg index 9fc25f52..a23cafc8 100644 --- a/config/printer-eryone-er20-2021.cfg +++ b/config/printer-eryone-er20-2021.cfg @@ -112,7 +112,7 @@ max_temp: 100 [fan] pin: PB5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PB4 [mcu] diff --git a/config/printer-eryone-thinker-series-v2-2020.cfg b/config/printer-eryone-thinker-series-v2-2020.cfg index 78fb8aac..47899548 100644 --- a/config/printer-eryone-thinker-series-v2-2020.cfg +++ b/config/printer-eryone-thinker-series-v2-2020.cfg @@ -67,7 +67,7 @@ max_extrude_only_distance: 300 [fan] pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PH3 [heater_bed] diff --git a/config/printer-lulzbot-mini1-2016.cfg b/config/printer-lulzbot-mini1-2016.cfg index b1471dd1..9be60cbd 100644 --- a/config/printer-lulzbot-mini1-2016.cfg +++ b/config/printer-lulzbot-mini1-2016.cfg @@ -114,7 +114,7 @@ max_temp: 130 #define FAN_PIN 8 pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] #define FAN1_PIN 6 pin: PH3 diff --git a/config/printer-lulzbot-taz6-2017.cfg b/config/printer-lulzbot-taz6-2017.cfg index 8046381f..7f775b57 100644 --- a/config/printer-lulzbot-taz6-2017.cfg +++ b/config/printer-lulzbot-taz6-2017.cfg @@ -97,7 +97,7 @@ max_temp: 130 [fan] pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PH3 [mcu] diff --git a/config/printer-lulzbot-taz6-dual-v3-2017.cfg b/config/printer-lulzbot-taz6-dual-v3-2017.cfg index 2ec91f9e..f94b0684 100644 --- a/config/printer-lulzbot-taz6-dual-v3-2017.cfg +++ b/config/printer-lulzbot-taz6-dual-v3-2017.cfg @@ -128,7 +128,7 @@ max_temp: 130 #On Dual v3 heat break fan is connected to PH3 (part cooling fan on single extruder) pin: PH3 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] #On Dual v3 part fans are connected to PH5 (heat break fan on single extruder) pin: PH5 diff --git a/config/printer-makergear-m2-2016.cfg b/config/printer-makergear-m2-2016.cfg index db0cfbf8..4379a4be 100644 --- a/config/printer-makergear-m2-2016.cfg +++ b/config/printer-makergear-m2-2016.cfg @@ -70,7 +70,7 @@ max_temp: 90 [fan] pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PH3 [mcu] diff --git a/config/printer-mtw-create-2015.cfg b/config/printer-mtw-create-2015.cfg index 674d0be9..7480c4bd 100644 --- a/config/printer-mtw-create-2015.cfg +++ b/config/printer-mtw-create-2015.cfg @@ -104,7 +104,7 @@ mesh_max: 225, 225 [fan] pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PH3 [mcu] diff --git a/config/printer-seemecnc-rostock-max-v2-2015.cfg b/config/printer-seemecnc-rostock-max-v2-2015.cfg index 31eb100b..70ebd876 100644 --- a/config/printer-seemecnc-rostock-max-v2-2015.cfg +++ b/config/printer-seemecnc-rostock-max-v2-2015.cfg @@ -63,7 +63,7 @@ max_temp: 300 [fan] pin: PH5 -[heater_fan nozzle_cooling_fan] +[heater_fan heatbreak_cooling_fan] pin: PH4 heater: extruder |