diff options
Diffstat (limited to 'config/sample-bigtreetech-hermit-crab-canbus.cfg')
| -rw-r--r-- | config/sample-bigtreetech-hermit-crab-canbus.cfg | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/config/sample-bigtreetech-hermit-crab-canbus.cfg b/config/sample-bigtreetech-hermit-crab-canbus.cfg index ce3b3045..beec65b1 100644 --- a/config/sample-bigtreetech-hermit-crab-canbus.cfg +++ b/config/sample-bigtreetech-hermit-crab-canbus.cfg @@ -10,21 +10,21 @@ serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 #canbus_uuid: 0e0d81e4210c [adxl345] -cs_pin: HermitCrab: PB12 +cs_pin: HermitCrab:PB12 spi_bus: spi2 axes_map: y,z,-x [extruder] -step_pin: HermitCrab: PA6 -dir_pin: !HermitCrab: PA7 -enable_pin: !HermitCrab: PA5 +step_pin: HermitCrab:PA6 +dir_pin: !HermitCrab:PA7 +enable_pin: !HermitCrab:PA5 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: HermitCrab: PA2 +heater_pin: HermitCrab:PA2 sensor_type: EPCOS 100K B57560G104F -sensor_pin: HermitCrab: PA1 +sensor_pin: HermitCrab:PA1 control: pid pid_Kp: 21.527 pid_Ki: 1.063 @@ -33,15 +33,15 @@ min_temp: 0 max_temp: 250 [tmc2209 extruder] -uart_pin: HermitCrab: PB0 +uart_pin: HermitCrab:PB0 run_current: 0.650 stealthchop_threshold: 999999 [fan] -pin: HermitCrab: PA4 +pin: HermitCrab:PA4 [heater_fan hotend_fan] -pin: HermitCrab: PA3 +pin: HermitCrab:PA3 heater: extruder heater_temp: 50.0 |