diff options
Diffstat (limited to 'config/printer-mtw-create-2015.cfg')
| -rw-r--r-- | config/printer-mtw-create-2015.cfg | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/config/printer-mtw-create-2015.cfg b/config/printer-mtw-create-2015.cfg index 74f0056c..cae0524e 100644 --- a/config/printer-mtw-create-2015.cfg +++ b/config/printer-mtw-create-2015.cfg @@ -8,7 +8,8 @@ step_pin: PC0 dir_pin: !PL1 enable_pin: !PA7 -step_distance: .01 +microsteps: 16 +rotation_distance: 32 endstop_pin: ^PB6 #endstop_pin: ^PA2 position_endstop: 0 @@ -19,7 +20,8 @@ homing_speed: 50 step_pin: PC1 dir_pin: PL0 enable_pin: !PA6 -step_distance: .01 +microsteps: 16 +rotation_distance: 32 endstop_pin: ^PB5 #endstop_pin: ^PA1 position_endstop: 0 @@ -30,7 +32,8 @@ homing_speed: 50 step_pin: PC2 dir_pin: PL2 enable_pin: !PA5 -step_distance: .00125 +microsteps: 16 +rotation_distance: 4 endstop_pin: probe:z_virtual_endstop #endstop_pin: ^PC7 #position_endstop: 0.5 @@ -40,7 +43,8 @@ position_max: 225 step_pin: PC3 dir_pin: PL6 enable_pin: !PA4 -step_distance: .0102 +microsteps: 16 +rotation_distance: 32.640 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: PH6 @@ -60,7 +64,8 @@ max_temp: 275 #enable_pin: !PA3 #heater_pin: PH4 #sensor_pin: PF1 -#step_distance: .0102 +#microsteps: 16 +#rotation_distance: 32.640 #nozzle_diameter: 0.400 #filament_diameter: 1.750 #sensor_type: ATC Semitec 104GT-2 |