diff options
Diffstat (limited to 'config/printer-monoprice-select-mini-v2-2018.cfg')
| -rw-r--r-- | config/printer-monoprice-select-mini-v2-2018.cfg | 23 |
1 files changed, 14 insertions, 9 deletions
diff --git a/config/printer-monoprice-select-mini-v2-2018.cfg b/config/printer-monoprice-select-mini-v2-2018.cfg index 1f7fe7d6..dd4ded29 100644 --- a/config/printer-monoprice-select-mini-v2-2018.cfg +++ b/config/printer-monoprice-select-mini-v2-2018.cfg @@ -51,12 +51,13 @@ homing_speed: 15 step_pin: PB14 dir_pin: !PB15 #modify stepper direction if necessary enable_pin: !PA8 -# step_distance varies in the printer model. Check the correct step-rate of -# your Select Mini in the original firmware (with M503) and calculate the -# appropriate value for step_distance = 1/steps per unit. This has to be done -# for all axis. -# This config contains values for later MSPMv2 printers with 93 steps per mm. -step_distance: .01075 # 93 steps/mm +# rotation_distance varies in the printer model. Check the correct +# step-rate of your Select Mini in the original firmware (with M503) +# and calculate the appropriate value for rotation_distance. This has +# to be done for all axes. +# This config contains values for later MSPMv2 printers. +microsteps: 16 +rotation_distance: 34.510 # 17 teeth on pulley; MXL belt (2.03 pitch) endstop_pin: ^!PB4 position_endstop: 0 position_max: 120 @@ -67,7 +68,8 @@ homing_speed: 15 step_pin: PB12 dir_pin: PB13 #modify stepper direction if necessary enable_pin: !PA8 -step_distance: .010753 # 93 steps/mm. check comment in [stepper_x] section +microsteps: 16 +rotation_distance: 34.510 # check comment in [stepper_x] section endstop_pin: ^!PA15 position_endstop: 0 position_max: 120 @@ -78,7 +80,9 @@ homing_speed: 10 step_pin: PB10 dir_pin: PB2 #modify stepper direction if necessary enable_pin: !PB11 -step_distance: 0.000911 # 1097.5 steps/mm. check comment in [stepper_x] section +microsteps: 16 +full_steps_per_rotation: 48 +rotation_distance: 0.7 # M4 rod. check comment in [stepper_x] section endstop_pin: ^!PB5 position_endstop: 0.5 position_max: 120 @@ -88,7 +92,8 @@ position_max: 120 step_pin: PB0 dir_pin: !PC13 #modify stepper direction if necessary enable_pin: !PB1 -step_distance: 0.010301 # 97 steps/mm. check comment in [stepper_x] section +microsteps: 16 +rotation_distance: 32.990 # 97 steps/mm. check comment in [stepper_x] section nozzle_diameter: 0.400 filament_diameter: 1.750 # heater |