1 files changed, 28 insertions, 29 deletions
diff --git a/config/printer-micromake-d1-2016.cfg b/config/printer-micromake-d1-2016.cfg
index e221602f..928f7995 100644
--- a/config/printer-micromake-d1-2016.cfg
+++ b/config/printer-micromake-d1-2016.cfg
@@ -5,43 +5,43 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [stepper_a]
-step_pin: ar54
-dir_pin: !ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: !PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 32
-endstop_pin: ^ar2
+endstop_pin: ^PE4
 homing_speed: 100
 position_endstop: 319.5
 arm_length: 217.0
 
 [stepper_b]
-step_pin: ar60
-dir_pin: !ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 32
-endstop_pin: ^ar15
+endstop_pin: ^PJ0
 
 [stepper_c]
-step_pin: ar46
-dir_pin: !ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: !PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 32
-endstop_pin: ^ar19
+endstop_pin: ^PD2
 
 [extruder]
-step_pin: ar26
-dir_pin: ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 20.067
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 22.2
 pid_Ki: 1.08
@@ -51,11 +51,10 @@ max_temp: 250
 max_extrude_only_distance: 100.0
 
 [fan]
-pin: ar9
+pin: PH6
 
 [mcu]
 serial: /dev/ttyACM0
-pin_map: arduino
 
 [printer]
 kinematics: delta
@@ -68,16 +67,16 @@ delta_radius: 95
 radius: 80
 
 #[probe]
-#pin: ^!ar18
+#pin: ^!PD3
 
 [display]
 lcd_type: hd44780
-rs_pin: ar16
-e_pin: ar17
-d4_pin: ar23
-d5_pin: ar25
-d6_pin: ar27
-d7_pin: ar29
-encoder_pins: ^ar31, ^ar33
-click_pin: ^!ar35
-kill_pin: ^!ar41
+rs_pin: PH1
+e_pin: PH0
+d4_pin: PA1
+d5_pin: PA3
+d6_pin: PA5
+d7_pin: PA7
+encoder_pins: ^PC6, ^PC4
+click_pin: ^!PC2
+kill_pin: ^!PG0