diff options
Diffstat (limited to 'config/printer-artillery-genius-pro-2022.cfg')
| -rw-r--r-- | config/printer-artillery-genius-pro-2022.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/printer-artillery-genius-pro-2022.cfg b/config/printer-artillery-genius-pro-2022.cfg index aec7841c..4bdae391 100644 --- a/config/printer-artillery-genius-pro-2022.cfg +++ b/config/printer-artillery-genius-pro-2022.cfg @@ -5,7 +5,7 @@ # To flash this firmware, set the physical bridge between +3.3V and Boot0 PIN # on Artillery_Ruby mainboard. Then run the command: -# make flash FLASH_DEVICE=/dev/serial/by-id/usb-Klipper_stm32f401xc_*-if00 +# make flash FLASH_DEVICE=/dev/serial/by-id/usb-Kutter_stm32f401xc_*-if00 # See docs/Config_Reference.md for a description of parameters. @@ -91,7 +91,7 @@ pin: PC6 idle_timeout: 300 [mcu] -serial: /dev/serial/by-id/usb-Klipper_stm32f401xc_ +serial: /dev/serial/by-id/usb-Kutter_stm32f401xc_ [printer] kinematics: cartesian |