diff options
| author | Tomasz Kramkowski <tomasz@kramkow.ski> | 2025-08-15 21:13:44 +0100 |
|---|---|---|
| committer | Tomasz Kramkowski <tomasz@kramkow.ski> | 2025-08-15 21:46:37 +0100 |
| commit | ae9102482560b557628c83a247ab35063ade0bf7 (patch) | |
| tree | 2f08afac5a943aac31186e2c5c0c7d60e6d8837a /config/printer-artillery-genius-pro-2022.cfg | |
| parent | 121edea90cde8295f720ed9d2f2fccca61f66bb4 (diff) | |
| download | kutter-ae9102482560b557628c83a247ab35063ade0bf7.tar.gz kutter-ae9102482560b557628c83a247ab35063ade0bf7.tar.xz kutter-ae9102482560b557628c83a247ab35063ade0bf7.zip | |
Rename everything significant to Kutter except for docs
Diffstat (limited to 'config/printer-artillery-genius-pro-2022.cfg')
| -rw-r--r-- | config/printer-artillery-genius-pro-2022.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/printer-artillery-genius-pro-2022.cfg b/config/printer-artillery-genius-pro-2022.cfg index aec7841c..4bdae391 100644 --- a/config/printer-artillery-genius-pro-2022.cfg +++ b/config/printer-artillery-genius-pro-2022.cfg @@ -5,7 +5,7 @@ # To flash this firmware, set the physical bridge between +3.3V and Boot0 PIN # on Artillery_Ruby mainboard. Then run the command: -# make flash FLASH_DEVICE=/dev/serial/by-id/usb-Klipper_stm32f401xc_*-if00 +# make flash FLASH_DEVICE=/dev/serial/by-id/usb-Kutter_stm32f401xc_*-if00 # See docs/Config_Reference.md for a description of parameters. @@ -91,7 +91,7 @@ pin: PC6 idle_timeout: 300 [mcu] -serial: /dev/serial/by-id/usb-Klipper_stm32f401xc_ +serial: /dev/serial/by-id/usb-Kutter_stm32f401xc_ [printer] kinematics: cartesian |