diff options
Diffstat (limited to 'config/generic-fysetc-spider.cfg')
| -rw-r--r-- | config/generic-fysetc-spider.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/generic-fysetc-spider.cfg b/config/generic-fysetc-spider.cfg index ea0dabc3..8134c57b 100644 --- a/config/generic-fysetc-spider.cfg +++ b/config/generic-fysetc-spider.cfg @@ -2,7 +2,7 @@ # To use this config, the firmware should be compiled for the STM32F446. # When calling "menuconfig", enable "extra low-level configuration setup" # and select the "12MHz crystal" as clock reference. -# For flashing, write the compiled klipper.bin to memory location 0x08000000 +# For flashing, write the compiled kutter.bin to memory location 0x08000000 # See docs/Config_Reference.md for a description of parameters. @@ -113,7 +113,7 @@ pin: PB0 [mcu] ## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify -serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 +serial: /dev/serial/by-id/usb-Kutter_Kutter_firmware_12345-if00 [printer] kinematics: cartesian |