diff options
Diffstat (limited to 'config/generic-bigtreetech-skr-v1.3.cfg')
| -rw-r--r-- | config/generic-bigtreetech-skr-v1.3.cfg | 88 |
1 files changed, 21 insertions, 67 deletions
diff --git a/config/generic-bigtreetech-skr-v1.3.cfg b/config/generic-bigtreetech-skr-v1.3.cfg index 1982df1d..22a607cc 100644 --- a/config/generic-bigtreetech-skr-v1.3.cfg +++ b/config/generic-bigtreetech-skr-v1.3.cfg @@ -134,9 +134,9 @@ max_z_accel: 100 #[tmc2130 stepper_x] #cs_pin: P1.17 -#spi_software_sclk_pin: P0.4 -#spi_software_mosi_pin: P4.28 #spi_software_miso_pin: P0.5 +#spi_software_mosi_pin: P4.28 +#spi_software_sclk_pin: P0.4 ##diag1_pin: P1.29 #microsteps: 16 #run_current: 0.800 @@ -145,9 +145,9 @@ max_z_accel: 100 #[tmc2130 stepper_y] #cs_pin: P1.15 -#spi_software_sclk_pin: P0.4 -#spi_software_mosi_pin: P4.28 #spi_software_miso_pin: P0.5 +#spi_software_mosi_pin: P4.28 +#spi_software_sclk_pin: P0.4 ##diag1_pin: P1.27 #microsteps: 16 #run_current: 0.800 @@ -156,9 +156,9 @@ max_z_accel: 100 #[tmc2130 stepper_z] #cs_pin: P1.10 -#spi_software_sclk_pin: P0.4 -#spi_software_mosi_pin: P4.28 #spi_software_miso_pin: P0.5 +#spi_software_mosi_pin: P4.28 +#spi_software_sclk_pin: P0.4 ##diag1_pin: P1.25 #microsteps: 16 #run_current: 0.650 @@ -167,9 +167,9 @@ max_z_accel: 100 #[tmc2130 extruder] #cs_pin: P1.8 -#spi_software_sclk_pin: P0.4 -#spi_software_mosi_pin: P4.28 #spi_software_miso_pin: P0.5 +#spi_software_mosi_pin: P4.28 +#spi_software_sclk_pin: P0.4 ##diag1_pin: P1.28 #microsteps: 16 #run_current: 0.800 @@ -178,9 +178,9 @@ max_z_accel: 100 #[tmc2130 extruder1] #cs_pin: P1.1 -#spi_software_sclk_pin: P0.4 -#spi_software_mosi_pin: P4.28 #spi_software_miso_pin: P0.5 +#spi_software_mosi_pin: P4.28 +#spi_software_sclk_pin: P0.4 ##diag1_pin: P1.26 #microsteps: 16 #run_current: 0.800 @@ -189,63 +189,17 @@ max_z_accel: 100 ######################################## -# Optional LCD configuration +# EXP1 / EXP2 (display) pins ######################################## -# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays -#[display] -#lcd_type: st7920 -#cs_pin: P1.19 -#sclk_pin: P1.20 -#sid_pin: P1.18 -#encoder_pins: ^P3.26, ^P3.25 -#click_pin: ^!P0.28 -# -#[output_pin beeper] -#pin: P1.30 - -# "RepRapDiscount 2004 Smart Controller" type displays -#[display] -#lcd_type: hd44780 -#rs_pin: P1.19 -#e_pin: P1.18 -#d4_pin: P1.20 -#d5_pin: P1.21 -#d6_pin: P1.22 -#d7_pin: P1.23 -#encoder_pins: ^P3.26, ^P3.25 -#click_pin: ^!P0.28 -# -#[output_pin beeper] -#pin: P1.30 - -# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay -#[display] -#lcd_type: st7920 -#cs_pin: P1.19 -#sclk_pin: P1.21 -#sid_pin: P1.23 -#encoder_pins: ^P1.18, ^P1.20 -#click_pin: !P0.28 -# -#[output_pin beeper] -#pin: P1.30 +[board_pins] +aliases: + # EXP1 header + EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>, + EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>, + # EXP2 header + EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>, + EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC> + # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0" -# MKS Mini 12864 LCD. -# Make sure that the EXP1 and EXP2 are rotated correctly on the -# display board. The cutouts on the connectors should be towards the -# center of the PCB. See: -# https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface -# If they are wrong, the connector housing can be pried off carefully -# with a small screwdriver and relocated the correct way. -# -#[display] -#lcd_type: uc1701 -#cs_pin: P1.21 -#a0_pin: P1.22 -#contrast: 40 -#encoder_pins: ^P3.25, ^P3.26 -#click_pin: ^!P0.28 -# -#[output_pin beeper] -#pin: P1.30 +# See the sample-lcd.cfg file for definitions of common LCD displays. |