diff options
Diffstat (limited to 'config/generic-bigtreetech-skr-mini-e3-v1.2.cfg')
| -rw-r--r-- | config/generic-bigtreetech-skr-mini-e3-v1.2.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg b/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg index a5a306a2..c5faf9c9 100644 --- a/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg +++ b/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg @@ -5,7 +5,7 @@ # "GPIO pins to set at micro-controller startup" to "!PC13". # The "make flash" command does not work on the SKR mini E3. Instead, -# after running "make", copy the generated "out/klipper.bin" file to a +# after running "make", copy the generated "out/kutter.bin" file to a # file named "firmware.bin" on an SD card and then restart the SKR # mini E3 with that SD card. @@ -99,7 +99,7 @@ max_temp: 130 pin: PA8 [mcu] -serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 +serial: /dev/serial/by-id/usb-Kutter_Kutter_firmware_12345-if00 [printer] kinematics: cartesian |