diff options
Diffstat (limited to 'config/generic-bigtreetech-e3-rrf-v1.1.cfg')
| -rw-r--r-- | config/generic-bigtreetech-e3-rrf-v1.1.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/generic-bigtreetech-e3-rrf-v1.1.cfg b/config/generic-bigtreetech-e3-rrf-v1.1.cfg index b0153cba..687a6f1d 100644 --- a/config/generic-bigtreetech-e3-rrf-v1.1.cfg +++ b/config/generic-bigtreetech-e3-rrf-v1.1.cfg @@ -3,7 +3,7 @@ # STM32F407 with a "32KiB bootloader". # The "make flash" command does not work on the E3 RRF 1.1. Instead, -# after running "make", copy the generated "out/klipper.bin" file to a +# after running "make", copy the generated "out/kutter.bin" file to a # file named "firmware.bin" on an SD card and then restart the E3 RRF # 1.1 with that SD card. @@ -97,7 +97,7 @@ pin: PB6 pin: PB5 [mcu] -serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_370025000247303034313331-if00 +serial: /dev/serial/by-id/usb-Kutter_stm32f407xx_370025000247303034313331-if00 [printer] kinematics: cartesian |