diff options
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/config/example.cfg b/config/example.cfg index f9102ceb..4fc05b0b 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -161,14 +161,18 @@ heater_pin: ar4 # setting may be used to limit the total power output (over extended # periods) to the heater. The default is 1.0. sensor_type: EPCOS 100K B57560G104F -# Type of sensor - this may be "EPCOS 100K B57560G104F" or "ATC -# Semitec 104GT-2". This parameter must be provided. +# Type of sensor - this may be "EPCOS 100K B57560G104F", "ATC +# Semitec 104GT-2", or "AD595". This parameter must be provided. sensor_pin: analog1 -# Analog input pin connected to thermistor. This parameter must be +# Analog input pin connected to the sensor. This parameter must be # provided. #pullup_resistor: 4700 # The resistance (in ohms) of the pullup attached to the +# thermistor. This parameter is only valid when the sensor is a # thermistor. The default is 4700 ohms. +#adc_voltage: 5.0 +# The ADC comparison voltage. This parameter is only valid when the +# sensor is an AD595. The default is 5 volts. control: pid # Control algorithm (either pid or watermark). This parameter must # be provided. |