diff options
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/config/example.cfg b/config/example.cfg index 2119b3c9..96bddafb 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -256,13 +256,13 @@ pin_map: arduino #restart_method: arduino # This controls the mechanism the host will use to reset the # micro-controller. The choices are 'arduino', 'rpi_usb', and -# 'command'. The 'arduino' method (toggle DTR; set baud to 1200) is -# common on Arduino boards and clones. The 'rpi_usb' method is -# useful on Raspberry Pi boards with micro-controllers powered over -# USB - it briefly disables power to all USB ports to accomplish a -# micro-controller reset. The 'command' method involves sending a -# Klipper command to the micro-controller so that it can reset -# itself. The default is 'arduino'. +# 'command'. The 'arduino' method (toggle DTR) is common on Arduino +# boards and clones. The 'rpi_usb' method is useful on Raspberry Pi +# boards with micro-controllers powered over USB - it briefly +# disables power to all USB ports to accomplish a micro-controller +# reset. The 'command' method involves sending a Klipper command to +# the micro-controller so that it can reset itself. The default is +# 'arduino'. # The printer section controls high level printer settings. [printer] |