diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2017-10-12 21:21:49 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2017-10-12 21:46:09 -0400 |
| commit | e0f275cddf55fb1afd21bb66c22e3c2a25d8d247 (patch) | |
| tree | 4b38b3c532a05ebd30c516bb935c4e10399be828 /config/example.cfg | |
| parent | 07a69df62f7a3470329a3ea0ba1e569ab0e9d0fe (diff) | |
| download | kutter-e0f275cddf55fb1afd21bb66c22e3c2a25d8d247.tar.gz kutter-e0f275cddf55fb1afd21bb66c22e3c2a25d8d247.tar.xz kutter-e0f275cddf55fb1afd21bb66c22e3c2a25d8d247.zip | |
serialhdl: Don't open port at 1200 baud
The 1200 baud trick on the Arduino Due does both a reset and an
erase. The erase is not desired.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/config/example.cfg b/config/example.cfg index 2119b3c9..96bddafb 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -256,13 +256,13 @@ pin_map: arduino #restart_method: arduino # This controls the mechanism the host will use to reset the # micro-controller. The choices are 'arduino', 'rpi_usb', and -# 'command'. The 'arduino' method (toggle DTR; set baud to 1200) is -# common on Arduino boards and clones. The 'rpi_usb' method is -# useful on Raspberry Pi boards with micro-controllers powered over -# USB - it briefly disables power to all USB ports to accomplish a -# micro-controller reset. The 'command' method involves sending a -# Klipper command to the micro-controller so that it can reset -# itself. The default is 'arduino'. +# 'command'. The 'arduino' method (toggle DTR) is common on Arduino +# boards and clones. The 'rpi_usb' method is useful on Raspberry Pi +# boards with micro-controllers powered over USB - it briefly +# disables power to all USB ports to accomplish a micro-controller +# reset. The 'command' method involves sending a Klipper command to +# the micro-controller so that it can reset itself. The default is +# 'arduino'. # The printer section controls high level printer settings. [printer] |