diff options
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 459e71f4..256fa886 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -377,6 +377,28 @@ # if retries are enabled then retry if largest and smallest probed points # differ more than retry_tolerance +# Printer Skew Correction. It is possible to use software to correct +# printer skew across 3 planes, xy, xz, yz. This is done by printing +# a calibration model along a plane and measuring three lengths. See +# skew_correction.md in the docs directory for more details. +# +#[skew_correction] +#xy_ac_length: +#xy_bd_length: +#xy_ad_length: +# The measured lengths (in mm) on the xy plane skew calibration print. +# If one length is provided all three lengths must be provided. The default +# is no measurement, which results in no skew correction along the xy plane. +#xz_ac_length: +#xz_bd_length: +#xz_ad_length: +# The same as above, on the xz plane. The default is no skew correction +# on the xz plane. +#yz_ac_length: +#yz_bd_length: +#yz_ad_length: +# The same as above on the yz plane. The default is no skew correction +# on the yz plane. # In a multi-extruder printer add an additional extruder section for # each additional extruder. The additional extruder sections should be |