diff options
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index a28654f7..e67f7165 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -394,6 +394,31 @@ # provided when using an st7920 display. +# Custom thermistors (one may define any number of sections with a +# "thermistor" prefix). A custom thermistor may be used in the +# sensor_type field of a heater config section. (For example, if one +# defines a "[thermistor my_thermistor]" section then one may use a +# "sensor_type: my_thermistor" when defining a heater.) Be sure to +# place the thermistor section in the config file above its first use +# in a heater section. +#[thermistor my_thermistor] +#temperature1: +#resistance1: +#temperature2: +#resistance2: +#temperature3: +#resistance3: +# Three resistance measurements (in Ohms) at the given temperatures +# (in Celsius). The three measurements will be used to calculate the +# Steinhart-Hart coefficients for the thermistor. These parameters +# must be provided when using Steinhart-Hart to define the +# thermistor. +#beta: +# Alternatively, one may define temperature1, resistance1, and beta +# to define the thermistor parameters. This parameter must be +# provided when using "beta" to define the thermistor. + + # Replicape support - see the generic-replicape.cfg file for further # details. #[replicape] |