diff options
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 410a5835..33b67178 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -98,6 +98,30 @@ # activation. +# Support for cartesian printers with dual carriages on a single +# axis. The active carriage is set via the SET_DUAL_CARRIAGE extended +# g-code command. The "SET_DUAL_CARRIAGE CARRIAGE=1" command will +# activate the carriage defined in this section (CARRIAGE=0 will +# return activation to the primary carriage). Dual carriage support is +# typically combined with extra extruders - use the SET_DUAL_CARRIAGE +# command in the activate_gcode / deactivate_gcode section of the +# appropriate extruder. Be sure to also use that mechanism to park the +# carriages during deactivation. +#[dual_carriage] +#axis: +# The axis this extra carriage is on (either x or y). This parameter +# must be provided. +#step_pin: +#dir_pin: +#enable_pin: +#step_distance: +#endstop_pin: +#position_endstop: +#position_min: +#position_max: +# See the example.cfg for the definition of the above parameters. + + # Multi-stepper axes. On a cartesian style printer, the stepper # controlling a given axis may have additional config blocks defining # steppers that should be stepped in concert with the primary |