diff options
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index fc28000e..50d1ecfb 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -1654,9 +1654,9 @@ # Neopixel (aka WS2812) LED support (one may define any number of -# sections with a "neopixel" prefix). One may set the LED color via a -# "SET_NEOPIXEL NEOPIXEL=my_neopixel RED=0.1 GREEN=0.1 BLUE=0.1" type -# extended g-code commands. +# sections with a "neopixel" prefix). One may set the LED color via +# "SET_LED LED=my_neopixel RED=0.1 GREEN=0.1 BLUE=0.1" type extended +# g-code commands. #[neopixel my_neopixel] #pin: # The pin connected to the neopixel. This parameter must be @@ -1671,6 +1671,23 @@ # Sets the initial LED color of the Neopixel. Each value should be # between 0.0 and 1.0. The default for each color is 0. +# Dotstar (aka APA102) LED support (one may define any number of +# sections with a "dotstar" prefix). One may set the LED color via +# "SET_LED LED=my_dotstar RED=0.1 GREEN=0.1 BLUE=0.1" type extended +# g-code commands. +#[dotstar my_dotstar] +#data_pin: +# The pin connected to the data line of the dotstar. This parameter +# must be provided. +#clock_pin: +# The pin connected to the clock line of the dotstar. This parameter +# must be provided. +#chain_count: +#initial_RED: 0.0 +#initial_GREEN: 0.0 +#initial_BLUE: 0.0 +# See the "neopixel" section for information on these parameters. + # Firmware filament retraction. This enables G10 (retract) and G11 # (unretract) GCODE commands issued by many slicers. The parameters |