diff options
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 67c75000..5413ee18 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -69,6 +69,12 @@ # NEXT extended g-code command to record the position at that # point. The default is false if a [probe] config section is present # and true otherwise. +#samples: 1 +# The number of times to probe each point. The probed z-values +# will be averaged. The default is to probe 1 time. +#sample_retract_dist: 2.0 +# The distance (in mm) to retract between each sample if +# sampling more than once. Default is 2mm. # Mesh Bed Leveling. One may define a [bed_mesh] config section @@ -82,6 +88,12 @@ #horizontal_move_z: 5 # The height (in mm) that the head should be commanded to move to # just prior to starting a probe operation. The default is 5. +#samples: 1 +# The number of times to probe each point. The probed z-values +# will be averaged. The default is to probe 1 time. +#sample_retract_dist: 2.0 +# The distance (in mm) to retract between each sample if +# sampling more than once. Default is 2mm. #min_point: # An X,Y point defining the minimum coordinate to probe on # the bed. Note that this refers to the nozzle position, @@ -150,7 +162,12 @@ #horizontal_move_z: 5 # The height (in mm) that the head should be commanded to move to # just prior to starting a probe operation. The default is 5. - +#samples: 1 +# The number of times to probe each point. The probed z-values +# will be averaged. The default is to probe 1 time. +#sample_retract_dist: 2.0 +# The distance (in mm) to retract between each sample if +# sampling more than once. Default is 2mm. # In a multi-extruder printer add an additional extruder section for # each additional extruder. The additional extruder sections should be |