diff options
| -rw-r--r-- | config/generic-creality-v4.2.7.cfg | 4 | ||||
| -rw-r--r-- | config/generic-mks-robin-e3.cfg | 2 | ||||
| -rw-r--r-- | config/generic-replicape.cfg | 4 |
3 files changed, 5 insertions, 5 deletions
diff --git a/config/generic-creality-v4.2.7.cfg b/config/generic-creality-v4.2.7.cfg index 8f9d494e..21e99da5 100644 --- a/config/generic-creality-v4.2.7.cfg +++ b/config/generic-creality-v4.2.7.cfg @@ -93,6 +93,6 @@ max_z_accel: 100 [board_pins] aliases: - EXP1_1=PC6,EXP1_3=PB10,EXP1_5=PB14,EXP1_7=PB12,EXP1_9=<GND> - EXP1_2=PB2,EXP1_4=PB11,EXP1_6=PB13,EXP1_8=PB15,EXP1_10=<5V> + EXP1_1=PC6,EXP1_3=PB10,EXP1_5=PB14,EXP1_7=PB12,EXP1_9=<GND>, + EXP1_2=PB2,EXP1_4=PB11,EXP1_6=PB13,EXP1_8=PB15,EXP1_10=<5V>, PROBE_IN=PB0,PROBE_OUT=PB1,FIL_RUNOUT=PC6 diff --git a/config/generic-mks-robin-e3.cfg b/config/generic-mks-robin-e3.cfg index c0449c43..f30f2a08 100644 --- a/config/generic-mks-robin-e3.cfg +++ b/config/generic-mks-robin-e3.cfg @@ -127,7 +127,7 @@ aliases: EXP1_2=PC1, EXP1_4=PA5, EXP1_6=PA7, EXP1_8=PC5, EXP1_10=<5V>, # EXP2 header EXP2_1=PB14, EXP2_3=PB11, EXP2_5=PB0, EXP2_7=PC10, EXP2_9=<GND>, - EXP2_2=PB13, EXP2_4=PA15, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC> + EXP2_2=PB13, EXP2_4=PA15, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>, # CR_EXP3 header - additional header dedicated to Creality Ender 3/5 stock screens CR_EXP3_10=<5V>, CR_EXP3_8=PA4, CR_EXP3_6=PA6, CR_EXP3_4=<RST>, CR_EXP3_2=PC3, CR_EXP3_9=<GND>, CR_EXP3_7=PA5, CR_EXP3_5=PB0, CR_EXP3_3=PB11, CR_EXP3_1=PC1 diff --git a/config/generic-replicape.cfg b/config/generic-replicape.cfg index c83f2c9b..3dc3e012 100644 --- a/config/generic-replicape.cfg +++ b/config/generic-replicape.cfg @@ -130,8 +130,8 @@ aliases: mcu: host aliases: # Host aliases for Linux MCU - HOST_X2_STOP=gpio30, HOST_Y2_STOP=gpio113, HOST_Z2_STOP=gpio4 + HOST_X2_STOP=gpio30, HOST_Y2_STOP=gpio113, HOST_Z2_STOP=gpio4, # Thermistors - THERM_E=analog4, THERM_H=analog5, THERM_BED=analog6 + THERM_E=analog4, THERM_H=analog5, THERM_BED=analog6, # D1W pin DALLAS=gpio2 |