diff options
| -rw-r--r-- | docs/Slicers.md | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/docs/Slicers.md b/docs/Slicers.md index 0e849ffa..7c8ffb1c 100644 --- a/docs/Slicers.md +++ b/docs/Slicers.md @@ -50,6 +50,12 @@ between moves. This is likely to make blobbing worse, not better. In contrast, it is okay (and often helpful) to use a slicer's "retract" setting, "wipe" setting, and/or "wipe on retract" setting. +# Disable "PreloadVE" on KISSlicer + +If using KISSlicer slicing software then set "PreloadVE" to +zero. Consider using Klipper's [pressure advance](Pressure_Advance.md) +instead. + # Disable any "advanced extruder pressure" settings Some slicers advertise an "advanced extruder pressure" capability. It |