diff options
| -rw-r--r-- | docs/Config_Changes.md | 4 | ||||
| -rw-r--r-- | klippy/gcode.py | 5 |
2 files changed, 5 insertions, 4 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index a3e7208b..a6f5661f 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,10 @@ All dates in this document are approximate. # Changes +20191202: Support for the undocumented "S" parameter of the "G4" +command has been removed. Replace any occurrences of S with the +standard "P" parameter (the delay specified in milliseconds). + 20191126: The USB names have changed on micro-controllers with native USB support. They now use a unique chip id by default (where available). If an "mcu" config section uses a "serial" setting that diff --git a/klippy/gcode.py b/klippy/gcode.py index 323d5527..cd2fcd9e 100644 --- a/klippy/gcode.py +++ b/klippy/gcode.py @@ -515,10 +515,7 @@ class GCodeParser: self.move_with_transform(self.last_position, self.speed) def cmd_G4(self, params): # Dwell - if 'S' in params: - delay = self.get_float('S', params, minval=0.) - else: - delay = self.get_float('P', params, 0., minval=0.) / 1000. + delay = self.get_float('P', params, 0., minval=0.) / 1000. self.toolhead.dwell(delay) def cmd_G28(self, params): # Move to origin |