diff options
| -rw-r--r-- | config/generic-duet2.cfg | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/config/generic-duet2.cfg b/config/generic-duet2.cfg index 39603417..9a290e5f 100644 --- a/config/generic-duet2.cfg +++ b/config/generic-duet2.cfg @@ -183,7 +183,7 @@ enable_pin: !PC6 step_distance: .002 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: PA20 +heater_pin: !PA20 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC15 control: pid @@ -208,7 +208,7 @@ enable_pin: !PC6 step_distance: .002 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: PA16 +heater_pin: !PA16 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC12 control: pid @@ -233,7 +233,7 @@ enable_pin: !PC6 step_distance: .002 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: PC3 +heater_pin: !PC3 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC29 control: pid @@ -258,7 +258,7 @@ enable_pin: !PC6 step_distance: .002 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: PC5 +heater_pin: !PC5 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC30 control: pid @@ -276,7 +276,7 @@ interpolate: True run_current: 1.000 [heater_bed] -heater_pin: PA19 +heater_pin: !PA19 sensor_type: EPCOS 100K B57560G104F sensor_pin: PC13 control: watermark @@ -327,32 +327,32 @@ max_z_accel: 100 pins: !PC2 [output_pin FAN3] -pin: !sx1509_duex:PIN_12 +pin: sx1509_duex:PIN_12 pwm: True hardware_pwm: True # Only hardware PWM fans are supported [output_pin FAN4] -pin: !sx1509_duex:PIN_7 +pin: sx1509_duex:PIN_7 pwm: True hardware_pwm: True [output_pin FAN5] -pin: !sx1509_duex:PIN_6 +pin: sx1509_duex:PIN_6 pwm: True hardware_pwm: True [output_pin FAN6] -pin: !sx1509_duex:PIN_5 +pin: sx1509_duex:PIN_5 pwm: True hardware_pwm: True [output_pin FAN7] -pin: !sx1509_duex:PIN_4 +pin: sx1509_duex:PIN_4 pwm: True hardware_pwm: True [output_pin FAN8] -pin: !sx1509_duex:PIN_15 +pin: sx1509_duex:PIN_15 pwm: True hardware_pwm: True |