diff options
| -rw-r--r-- | docs/Config_Changes.md | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 3a432d5a..5f45970a 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,18 @@ All dates in this document are approximate. # Changes +20191220: The bed_mesh module now references the probe's location +in for the mesh configuration. As such, some configuration options +have been renamed to more accurately reflect their intended +functionality. For rectangular beds, `min_point` and `max_point` +have been renamed to `mesh_min` and `mesh_max` respectively. For +round beds, `bed_radius` has been renamed to `mesh_radius`. A new +`mesh_origin` option has also been added for round beds. Note that +these changes are also incompatible with previously saved mesh profiles. +If an incompatible profile is detected it will be ignored and scheduled +for removal. The removal process can be completed by issuing the +SAVE_CONFIG command. The user will need to re-calibrate each profile. + 20191218: The display config section no longer supports "lcd_type: st7567". Use the "uc1701" display type instead - set "lcd_type: uc1701" and change the "rs_pin: some_pin" to "rst_pin: some_pin". It |