2 files changed, 89 insertions, 0 deletions
diff --git a/config/printer-sovol-sv01-2020.cfg b/config/printer-sovol-sv01-2020.cfg
new file mode 100644
index 00000000..81877696
--- /dev/null
+++ b/config/printer-sovol-sv01-2020.cfg
@@ -0,0 +1,88 @@
+# This file contains common pin mappings for Sovol Sv01 printer. To
+# use this config, the firmware should be compiled for the AVR
+# atmega2560.
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_x]
+step_pin: ar54
+dir_pin: ar55
+enable_pin: !ar38
+step_distance: .0125
+endstop_pin: ^ar3
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_y]
+step_pin: ar60
+dir_pin: ar61
+enable_pin: !ar56
+step_distance: .0125
+endstop_pin: ^ar14
+position_endstop: 0
+position_max: 255
+homing_speed: 50
+
+[stepper_z]
+step_pin: ar46
+dir_pin: !ar48
+enable_pin: !ar62
+step_distance: .0025
+endstop_pin: ^ar18
+position_endstop: 0
+position_max: 300
+
+[extruder]
+step_pin: ar26
+dir_pin: !ar28
+enable_pin: !ar24
+step_distance: .0024
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: ar10
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog13
+control: pid
+pid_Kp: 31.147
+pid_Ki: 2.076
+pid_Kd: 116.803
+min_temp: 0
+max_temp: 265
+
+[heater_bed]
+heater_pin: ar8
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: analog14
+control: pid
+pid_Kp: 72.174
+pid_Ki: 1.816
+pid_Kd: 717.224
+min_temp: 0
+max_temp: 110
+
+[filament_switch_sensor my_sensor]
+switch_pin: ar2
+pause_on_runout: True
+
+[fan]
+pin: ar9
+
+[mcu]
+serial: /dev/ttyUSB0
+pin_map: arduino
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[display]
+lcd_type: st7920
+cs_pin: ar16
+sclk_pin: ar23
+sid_pin: ar17
+encoder_pins: ^ar33, ^ar31
+click_pin: ^!ar35
diff --git a/test/klippy/printers.test b/test/klippy/printers.test
index a69eb6b2..08e26320 100644
--- a/test/klippy/printers.test
+++ b/test/klippy/printers.test
@@ -35,6 +35,7 @@ CONFIG ../../config/printer-makergear-m2-2012.cfg
 CONFIG ../../config/printer-micromake-d1-2016.cfg
 CONFIG ../../config/printer-mtw-create-2015.cfg
 CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
+CONFIG ../../config/printer-sovol-sv01-2020.cfg
 CONFIG ../../config/printer-tevo-flash-2018.cfg
 CONFIG ../../config/printer-velleman-k8200-2013.cfg
 CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg