diff options
| -rw-r--r-- | config/printer-eryone-thinker-series-v2-2020.cfg | 8 |
1 files changed, 3 insertions, 5 deletions
diff --git a/config/printer-eryone-thinker-series-v2-2020.cfg b/config/printer-eryone-thinker-series-v2-2020.cfg index 31a6d5fd..78fb8aac 100644 --- a/config/printer-eryone-thinker-series-v2-2020.cfg +++ b/config/printer-eryone-thinker-series-v2-2020.cfg @@ -1,9 +1,6 @@ # This file contains pin mappings for the Eryone Thinker Series V2. # To use this config, the firmware should be compiled for the AVR atmega2560. -# Author: dapostol73 -# Thanks to 3D.Subzwari and MAD3D for the help! - # Extra settings to support BL Touch, Filament Runout sensor, TMC2209 and # have setting for fixing GCode errors, these configus can be found on # Eryone's Facebook Group under files. @@ -43,7 +40,7 @@ enable_pin: !PA5 microsteps: 16 rotation_distance: 8 position_max: 400 -homing_speed: 25 +homing_speed: 5 endstop_pin: !PB4 position_endstop: 0 @@ -52,7 +49,8 @@ step_pin: PC3 dir_pin: !PL6 enable_pin: !PA4 microsteps: 16 -rotation_distance: 32 +# Stock extruder [200 steps/rot]*[16 steps]/[93 steps/mm] +rotation_distance: 34.4 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: PH6 |