diff options
| -rw-r--r-- | docs/Pressure_Advance.md | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/Pressure_Advance.md b/docs/Pressure_Advance.md index db7bf668..d16364fb 100644 --- a/docs/Pressure_Advance.md +++ b/docs/Pressure_Advance.md @@ -102,7 +102,7 @@ Important Notes by using a high printing speed (eg, 100mm/s) and a coarse layer height (typically around 75% of the nozzle diameter). Other slicer settings should be similar to their defaults (eg, perimeters of 2 or - 3 layers, normal retraction amount). It can be useful to set the + 3 lines, normal retraction amount). It can be useful to set the external perimeter speed to be the same speed as the rest of the print, but it is not a requirement. |