diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-10-24 21:11:53 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-10-24 21:11:53 -0400 |
| commit | cc9541092ae4d83c74a933964a1bf1c75223026a (patch) | |
| tree | 7bc063ff4aa83ced578d9484736dded4d2c222fa /test/klippy/z_tilt.cfg | |
| parent | f013b7bae6597e106fcade946b2494be682798b3 (diff) | |
| download | kutter-cc9541092ae4d83c74a933964a1bf1c75223026a.tar.gz kutter-cc9541092ae4d83c74a933964a1bf1c75223026a.tar.xz kutter-cc9541092ae4d83c74a933964a1bf1c75223026a.zip | |
test: Update test case to not use pin_map
Remove all users of the pin_map setting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'test/klippy/z_tilt.cfg')
| -rw-r--r-- | test/klippy/z_tilt.cfg | 59 |
1 files changed, 29 insertions, 30 deletions
diff --git a/test/klippy/z_tilt.cfg b/test/klippy/z_tilt.cfg index 323bc8ce..444b43c4 100644 --- a/test/klippy/z_tilt.cfg +++ b/test/klippy/z_tilt.cfg @@ -1,54 +1,54 @@ # Test config for z_tilt and quad_gantry_level [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 250 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 250 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0.5 position_max: 250 [stepper_z1] -step_pin: ar36 -dir_pin: ar34 -enable_pin: !ar30 +step_pin: PC1 +dir_pin: PC3 +enable_pin: !PC7 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar19 +endstop_pin: ^PD2 [stepper_z2] -step_pin: ar16 -dir_pin: ar17 -enable_pin: !ar23 +step_pin: PH1 +dir_pin: PH0 +enable_pin: !PA1 microsteps: 16 rotation_distance: 8 [stepper_z3] -step_pin: ar5 -dir_pin: ar4 +step_pin: PE3 +dir_pin: PG5 microsteps: 16 rotation_distance: 8 @@ -82,16 +82,16 @@ points: 195,50 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.5 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -100,20 +100,19 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: watermark min_temp: 0 max_temp: 130 [probe] -pin: ar9 +pin: PH6 z_offset: 1.15 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian |