diff options
| author | Grigori Goronzy <greg@chown.ath.cx> | 2018-03-31 15:34:59 +0200 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2018-04-09 18:08:29 -0400 |
| commit | 75d57372115eb70ac22d16240c5c887df8ae1da8 (patch) | |
| tree | d31b31d32f80916c8406fc663994260a1acaa786 /test/configs | |
| parent | e097b085209e4737abc71dbb0fc06408a6e1f6d1 (diff) | |
| download | kutter-75d57372115eb70ac22d16240c5c887df8ae1da8.tar.gz kutter-75d57372115eb70ac22d16240c5c887df8ae1da8.tar.xz kutter-75d57372115eb70ac22d16240c5c887df8ae1da8.zip | |
Add STM32F103 port
Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.
This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.
Signed-off-by: Grigori Goronzy <greg@kinoho.net>
Diffstat (limited to 'test/configs')
0 files changed, 0 insertions, 0 deletions