diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2022-12-14 11:36:18 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2023-01-17 18:22:21 -0500 |
| commit | 33f973e4523a0d86110bef19e9e0de6a8092ade1 (patch) | |
| tree | e610d2bca7f7246ef5b1d9facad503ecf454f5ef /src | |
| parent | cefbad9ef4cea82c6bc006b1f78f174f69bc594e (diff) | |
| download | kutter-33f973e4523a0d86110bef19e9e0de6a8092ade1.tar.gz kutter-33f973e4523a0d86110bef19e9e0de6a8092ade1.tar.xz kutter-33f973e4523a0d86110bef19e9e0de6a8092ade1.zip | |
stm32: Don't set boost nor linear calibration on stm32h723 adc3
Only adc1 and adc2 have these CR register bits on stm32h723.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'src')
| -rw-r--r-- | src/stm32/stm32h7_adc.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/src/stm32/stm32h7_adc.c b/src/stm32/stm32h7_adc.c index 75a56508..fdd8d21d 100644 --- a/src/stm32/stm32h7_adc.c +++ b/src/stm32/stm32h7_adc.c @@ -210,20 +210,26 @@ gpio_adc_setup(uint32_t pin) // Enable the ADC if (!(adc->CR & ADC_CR_ADEN)) { // Switch on voltage regulator and wait for it to stabilize - adc->CR = ADC_CR_ADVREGEN; + uint32_t cr = ADC_CR_ADVREGEN; + adc->CR = cr; uint32_t end = timer_read_time() + timer_from_us(20); while (timer_is_before(timer_read_time(), end)) ; - // Perform adc calibration - uint32_t cr = ADC_CR_ADVREGEN | ADC_CR_ADCAL; + // Setup chip specific flags #if CONFIG_MACH_STM32H7 - // Set boost mode on stm32h7 (adc clock is at 25Mhz) - cr |= 0b10 << ADC_CR_BOOST_Pos; - // Use linear calibration on stm32h7 - cr |= ADC_CR_ADCALLIN; + if (!(CONFIG_MACH_STM32H723 && adc == ADC3)) { + // Use linear calibration on stm32h7 + cr |= ADC_CR_ADCALLIN; + // Set boost mode on stm32h7 (adc clock is at 25Mhz) + cr |= 0b10 << ADC_CR_BOOST_Pos; + // Set 12bit samples on the stm32h7 + adc->CFGR = ADC_CFGR_JQDIS | (0b110 << ADC_CFGR_RES_Pos); + } #endif - adc->CR = cr; + + // Perform adc calibration + adc->CR = cr | ADC_CR_ADCAL; while (adc->CR & ADC_CR_ADCAL) ; @@ -242,12 +248,6 @@ gpio_adc_setup(uint32_t pin) | (aticks << 27)); adc->SMPR1 = av; adc->SMPR2 = av; - - // The stm32h7 chips need to be set to 12bit samples -#if CONFIG_MACH_STM32H7 - if (!(CONFIG_MACH_STM32H723 && adc == ADC3)) - adc->CFGR = ADC_CFGR_JQDIS | (0b110 << ADC_CFGR_RES_Pos); -#endif } if (pin == ADC_TEMPERATURE_PIN) { |