stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 5 insertions, 217 deletions

diff --git a/src/stm32f1/gpio.c b/src/stm32f1/gpio.c
index 5deb752b..e6df3888 100644
--- a/src/stm32f1/gpio.c
+++ b/src/stm32f1/gpio.c
@@ -4,34 +4,24 @@
 //
 // This file may be distributed under the terms of the GNU GPLv3 license.
 
-#include <stdint.h> // uint32_t
-#include <stdbool.h>
-#include "autoconf.h" // CONFIG_CLOCK_FREQ
+#include "board/irq.h" // irq_save
 #include "command.h" // shutdown
 #include "compiler.h" // ARRAY_SIZE
 #include "gpio.h" // gpio_out_setup
-#include "stm32f1xx.h"
-#include "stm32f1xx_ll_rcc.h"
-#include "stm32f1xx_ll_gpio.h"
-#include "stm32f1xx_ll_adc.h"
-#include "stm32f1xx_ll_spi.h"
+#include "internal.h" // GPIO
+#include "stm32f1xx_ll_gpio.h" // LL_GPIO_SetPinMode
 #include "sched.h" // sched_shutdown
-#include "board/irq.h"
-#include "board/io.h"
 
 
 /****************************************************************
  * Pin mappings
  ****************************************************************/
 
-#define GPIO(PORT, NUM) (((PORT)-'A') * 16 + (NUM))
-#define GPIO2PORT(PIN) ((PIN) / 16)
-
-static GPIO_TypeDef *const digital_regs[] = {
+GPIO_TypeDef *const digital_regs[] = {
     GPIOA, GPIOB, GPIOC, GPIOD, GPIOE
 };
 
-static uint32_t const digital_pins[] = {
+uint32_t const digital_pins[] = {
     LL_GPIO_PIN_0,
     LL_GPIO_PIN_1,
     LL_GPIO_PIN_2,
@@ -136,205 +126,3 @@ gpio_in_read(struct gpio_in g)
 {
     return LL_GPIO_IsInputPinSet(g.regs, g.bit);
 }
-
-
-/****************************************************************
- * Analog to Digital Converter (ADC) pins
- ****************************************************************/
-
-DECL_CONSTANT(ADC_MAX, 4095);
-
-#define ADC_DELAY (240 * 8)
-
-static bool adc_busy;
-static uint32_t adc_current_channel;
-
-static const uint8_t adc_pins[] = {
-    GPIO('A', 0), GPIO('A', 1), GPIO('A', 2), GPIO('A', 3),
-    GPIO('A', 4), GPIO('A', 5), GPIO('A', 6), GPIO('A', 7),
-    GPIO('B', 0), GPIO('B', 1), GPIO('C', 0), GPIO('C', 1),
-    GPIO('C', 2), GPIO('C', 3), GPIO('C', 4), GPIO('C', 5)
-};
-
-static const uint32_t adc_channels[] = {
-    LL_ADC_CHANNEL_0,
-    LL_ADC_CHANNEL_1,
-    LL_ADC_CHANNEL_2,
-    LL_ADC_CHANNEL_3,
-    LL_ADC_CHANNEL_4,
-    LL_ADC_CHANNEL_5,
-    LL_ADC_CHANNEL_6,
-    LL_ADC_CHANNEL_7,
-    LL_ADC_CHANNEL_8,
-    LL_ADC_CHANNEL_9,
-    LL_ADC_CHANNEL_10,
-    LL_ADC_CHANNEL_11,
-    LL_ADC_CHANNEL_12,
-    LL_ADC_CHANNEL_13,
-    LL_ADC_CHANNEL_14,
-    LL_ADC_CHANNEL_15,
-};
-
-struct gpio_adc
-gpio_adc_setup(uint8_t pin)
-{
-    // Find pin in adc_pins table
-    int chan;
-    for (chan=0; ; chan++) {
-        if (chan >= ARRAY_SIZE(adc_pins))
-            shutdown("Not a valid ADC pin");
-        if (adc_pins[chan] == pin)
-            break;
-    }
-
-    GPIO_TypeDef *regs = digital_regs[GPIO2PORT(pin)];
-    uint32_t bit = digital_pins[pin % 16];
-    LL_GPIO_SetPinMode(regs, bit, LL_GPIO_MODE_ANALOG);
-
-    return (struct gpio_adc){ .bit = adc_channels[chan] };
-}
-
-// Try to sample a value. Returns zero if sample ready, otherwise
-// returns the number of clock ticks the caller should wait before
-// retrying this function.
-uint32_t
-gpio_adc_sample(struct gpio_adc g)
-{
-    /* ADC not busy, start conversion */
-    if (!readb(&adc_busy)) {
-        LL_ADC_REG_SetSequencerRanks(ADC1, LL_ADC_REG_RANK_1, g.bit);
-        LL_ADC_SetChannelSamplingTime(ADC1, g.bit, LL_ADC_SAMPLINGTIME_239CYCLES_5);
-        LL_ADC_REG_StartConversionSWStart(ADC1);
-        adc_busy = true;
-        adc_current_channel = g.bit;
-        return ADC_DELAY;
-    /* ADC finished conversion for this channel */
-    } else if (LL_ADC_IsActiveFlag_EOS(ADC1) &&
-               readl(&adc_current_channel) == g.bit) {
-        LL_ADC_ClearFlag_EOS(ADC1);
-        adc_busy = false;
-        return 0;
-    }
-    /* Wants to sample another channel, or not finished yet */
-    return ADC_DELAY;
-}
-
-// Read a value; use only after gpio_adc_sample() returns zero
-uint16_t
-gpio_adc_read(struct gpio_adc g)
-{
-    return LL_ADC_REG_ReadConversionData12(ADC1);
-}
-
-// Cancel a sample that may have been started with gpio_adc_sample()
-void
-gpio_adc_cancel_sample(struct gpio_adc g)
-{
-    if (readb(&adc_busy) && readl(&adc_current_channel) == g.bit) {
-        adc_busy = false;
-        LL_ADC_ClearFlag_EOS(ADC1);
-    }
-}
-
-/****************************************************************
- * Serial Peripheral Interface (SPI) pins
- ****************************************************************/
-
-void spi_set_mode(SPI_TypeDef *spi, uint8_t mode)
-{
-    switch (mode) {
-    case 0:
-        LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_LOW);
-        LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_1EDGE);
-        break;
-    case 1:
-        LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_LOW);
-        LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_2EDGE);
-        break;
-    case 2:
-        LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_HIGH);
-        LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_1EDGE);
-        break;
-    case 3:
-        LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_HIGH);
-        LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_2EDGE);
-        break;
-    default:
-        shutdown("Invalid SPI mode");
-    }
-}
-
-void spi_set_baudrate(SPI_TypeDef *spi, uint32_t rate)
-{
-    const uint32_t pclk = __LL_RCC_CALC_PCLK1_FREQ(SystemCoreClock, LL_RCC_GetAPB1Prescaler());
-    const uint32_t prescaler = pclk / rate;
-
-    uint32_t setting = LL_SPI_BAUDRATEPRESCALER_DIV256;
-    if (prescaler <= 2)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV2;
-    else if (prescaler <= 4)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV4;
-    else if (prescaler <= 8)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV8;
-    else if (prescaler <= 16)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV16;
-    else if (prescaler <= 32)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV32;
-    else if (prescaler <= 64)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV64;
-    else if (prescaler <= 128)
-        setting = LL_SPI_BAUDRATEPRESCALER_DIV128;
-
-    LL_SPI_SetBaudRatePrescaler(spi, setting);
-}
-
-void spi_init_pins(void)
-{
-    LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_13, LL_GPIO_MODE_ALTERNATE);
-    LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_14, LL_GPIO_MODE_INPUT);
-    LL_GPIO_SetPinMode(GPIOB, LL_GPIO_PIN_15, LL_GPIO_MODE_ALTERNATE);
-    LL_GPIO_SetPinOutputType(GPIOB, LL_GPIO_PIN_13, LL_GPIO_OUTPUT_PUSHPULL);
-    LL_GPIO_SetPinPull(GPIOB, LL_GPIO_PIN_14, LL_GPIO_PULL_UP);
-    LL_GPIO_SetPinOutputType(GPIOB, LL_GPIO_PIN_15, LL_GPIO_OUTPUT_PUSHPULL);
-}
-
-struct spi_config
-spi_setup(uint32_t bus, uint8_t mode, uint32_t rate)
-{
-    struct spi_config config;
-    config.config = *SPI2;
-
-    if (bus > 0 || !rate)
-        shutdown("Invalid spi_setup parameters");
-
-    spi_init_pins();
-    spi_set_mode(&config.config, mode);
-    spi_set_baudrate(&config.config, rate);
-
-    return config;
-}
-
-void
-spi_prepare(struct spi_config config)
-{
-    *SPI2 = config.config;
-    LL_SPI_Enable(SPI2);
-}
-
-void
-spi_transfer(struct spi_config config, uint8_t receive_data,
-             uint8_t len, uint8_t *data)
-{
-    while (len--) {
-        LL_SPI_TransmitData8(SPI2, *data);
-        while (!LL_SPI_IsActiveFlag_TXE(SPI2));
-        if (receive_data) {
-            while (!LL_SPI_IsActiveFlag_RXNE(SPI2));
-            *data = LL_SPI_ReceiveData8(SPI2);
-        }
-        data++;
-    }
-
-    while (LL_SPI_IsActiveFlag_BSY(SPI2));
-    LL_SPI_Disable(SPI2);
-}