stm32: Add stm32h7 SPI support (#4850)

Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>

1 files changed, 150 insertions, 0 deletions

diff --git a/src/stm32/stm32h7_spi.c b/src/stm32/stm32h7_spi.c
new file mode 100644
index 00000000..b6ade88f
--- /dev/null
+++ b/src/stm32/stm32h7_spi.c
@@ -0,0 +1,150 @@
+// SPI functions on STM32H7
+//
+// Copyright (C) 2019  Kevin O'Connor <kevin@koconnor.net>
+//
+// This file may be distributed under the terms of the GNU GPLv3 license.
+
+#include "board/io.h" // readb, writeb
+#include "command.h" // shutdown
+#include "gpio.h" // spi_setup
+#include "internal.h" // gpio_peripheral
+#include "sched.h" // sched_shutdown
+
+struct spi_info {
+    SPI_TypeDef *spi;
+    uint8_t miso_pin, mosi_pin, sck_pin, function;
+};
+
+DECL_ENUMERATION("spi_bus", "spi2", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi2", "PB14,PB15,PB13");
+
+DECL_ENUMERATION("spi_bus", "spi1", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi1", "PA6,PA7,PA5");
+DECL_ENUMERATION("spi_bus", "spi1a", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi1a", "PB4,PB5,PB3");
+
+#if !CONFIG_MACH_STM32F1
+DECL_ENUMERATION("spi_bus", "spi2a", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi2a", "PC2,PC3,PB10");
+#endif
+
+#ifdef SPI3
+DECL_ENUMERATION("spi_bus", "spi3", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi3", "PB4,PB5,PB3");
+
+DECL_ENUMERATION("spi_bus", "spi3a", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi3a", "PC11,PC12,PC10");
+#endif
+
+#ifdef SPI4
+DECL_ENUMERATION("spi_bus", "spi4", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi4", "PE13,PE14,PE12");
+#endif
+
+#ifdef GPIOI
+DECL_ENUMERATION("spi_bus", "spi2b", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi2b", "PI2,PI3,PI1");
+#endif
+
+#ifdef SPI5
+DECL_ENUMERATION("spi_bus", "spi5", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi5", "PF8,PF9,PF7");
+DECL_ENUMERATION("spi_bus", "spi5a", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi5a", "PH7,PF11,PH6");
+#endif
+
+#ifdef SPI6
+DECL_ENUMERATION("spi_bus", "spi6", __COUNTER__);
+DECL_CONSTANT_STR("BUS_PINS_spi6", "PG12,PG14,PG13");
+#endif
+
+
+static const struct spi_info spi_bus[] = {
+    { SPI2, GPIO('B', 14), GPIO('B', 15), GPIO('B', 13), GPIO_FUNCTION(5) },
+    { SPI1, GPIO('A', 6), GPIO('A', 7), GPIO('A', 5), GPIO_FUNCTION(5) },
+    { SPI1, GPIO('B', 4), GPIO('B', 5), GPIO('B', 3), GPIO_FUNCTION(5) },
+#if !CONFIG_MACH_STM32F1
+    { SPI2, GPIO('C', 2), GPIO('C', 3), GPIO('B', 10), GPIO_FUNCTION(5) },
+#endif
+#ifdef SPI3
+    { SPI3, GPIO('B', 4), GPIO('B', 5), GPIO('B', 3), GPIO_FUNCTION(6) },
+    { SPI3, GPIO('C', 11), GPIO('C', 12), GPIO('C', 10), GPIO_FUNCTION(6) },
+#endif
+#ifdef SPI4
+    { SPI4, GPIO('E', 13), GPIO('E', 14), GPIO('E', 12), GPIO_FUNCTION(5) },
+#endif
+    { SPI2, GPIO('I', 2), GPIO('I', 3), GPIO('I', 1), GPIO_FUNCTION(5) },
+#ifdef SPI5
+    { SPI5, GPIO('F', 8), GPIO('F', 9), GPIO('F', 7), GPIO_FUNCTION(5) },
+    { SPI5, GPIO('H', 7), GPIO('F', 11), GPIO('H', 6), GPIO_FUNCTION(5) },
+#endif
+#ifdef SPI6
+    { SPI6, GPIO('G', 12), GPIO('G', 14), GPIO('G', 13), GPIO_FUNCTION(5)},
+#endif
+};
+
+struct spi_config
+spi_setup(uint32_t bus, uint8_t mode, uint32_t rate)
+{
+    if (bus >= ARRAY_SIZE(spi_bus))
+        shutdown("Invalid spi bus");
+
+    // Enable SPI
+    SPI_TypeDef *spi = spi_bus[bus].spi;
+    if (!is_enabled_pclock((uint32_t)spi)) {
+        enable_pclock((uint32_t)spi);
+        gpio_peripheral(spi_bus[bus].miso_pin, spi_bus[bus].function, 1);
+        gpio_peripheral(spi_bus[bus].mosi_pin, spi_bus[bus].function, 0);
+        gpio_peripheral(spi_bus[bus].sck_pin, spi_bus[bus].function, 0);
+    }
+
+    // Calculate CR1 register
+    uint32_t pclk = get_pclock_frequency((uint32_t)spi);
+    uint32_t div = 0;
+    while ((pclk >> (div + 1)) > rate && div < 7)
+        div++;
+
+    uint32_t cr1 = SPI_CR1_SPE;
+    spi->CFG1 |= (div << SPI_CFG1_MBR_Pos) | (7 << SPI_CFG1_DSIZE_Pos);
+    CLEAR_BIT(spi->CFG1, SPI_CFG1_CRCSIZE);
+    spi->CFG2 |= ((mode << SPI_CFG2_CPHA_Pos) | SPI_CFG2_MASTER | SPI_CFG2_SSM
+                   | SPI_CFG2_AFCNTR | SPI_CFG2_SSOE);
+    spi->CR1 |= SPI_CR1_SSI;
+
+    return (struct spi_config){ .spi = spi, .spi_cr1 = cr1 };
+}
+
+void
+spi_prepare(struct spi_config config)
+{
+}
+
+void
+spi_transfer(struct spi_config config, uint8_t receive_data,
+             uint8_t len, uint8_t *data)
+{
+    uint8_t rdata = 0;
+    SPI_TypeDef *spi = config.spi;
+
+    MODIFY_REG(spi->CR2, SPI_CR2_TSIZE, len);
+    // Enable SPI and start transfer, these MUST be set in this sequence
+    SET_BIT(spi->CR1, SPI_CR1_SPE);
+    SET_BIT(spi->CR1, SPI_CR1_CSTART);
+
+    while (len--) {
+        writeb((void *)&spi->TXDR, *data);
+        while((spi->SR & (SPI_SR_RXWNE | SPI_SR_RXPLVL)) == 0);
+        rdata = readb((void *)&spi->RXDR);
+
+        if (receive_data) {
+            *data = rdata;
+        }
+        data++;
+    }
+
+    while ((spi->SR & SPI_SR_EOT) == 0);
+
+    // Clear flags and disable SPI
+    SET_BIT(spi->IFCR, 0xFFFFFFFF);
+    CLEAR_BIT(spi->CR1, SPI_CR1_SPE);
+}