stm32: Initial support for stm32f2 (#3001)

Initial support for stm32f2 in general and STM32F207 in particular.

Boots up and communicates on STM32F207VC.

Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>

1 files changed, 191 insertions, 0 deletions

diff --git a/lib/stm32f2/include/stm32f2xx.h b/lib/stm32f2/include/stm32f2xx.h
new file mode 100644
index 00000000..b56e1e15
--- /dev/null
+++ b/lib/stm32f2/include/stm32f2xx.h
@@ -0,0 +1,191 @@
+/**
+  ******************************************************************************
+  * @file    stm32f2xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F2xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F2xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f2xx
+  * @{
+  */
+    
+#ifndef __STM32F2xx_H
+#define __STM32F2xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F2)
+#define STM32F2
+#endif /* STM32F2 */
+   
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
+
+  /* #define STM32F205xx */   /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
+                                   STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
+                                   STM32F205RB and STM32F205VB Devices */
+  /* #define STM32F215xx */   /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
+  /* #define STM32F207xx */   /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
+                                   STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
+  /* #define STM32F217xx */   /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
+    
+#endif
+   
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V2.2.3
+  */
+#define __STM32F2xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
+#define __STM32F2xx_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
+#define __STM32F2xx_CMSIS_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */
+#define __STM32F2xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32F2xx_CMSIS_VERSION        ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
+                                         |(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32F2xx_CMSIS_VERSION))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F205xx)
+  #include "stm32f205xx.h"
+#elif defined(STM32F215xx)
+  #include "stm32f215xx.h"
+#elif defined(STM32F207xx)
+  #include "stm32f207xx.h"
+#elif defined(STM32F217xx)
+  #include "stm32f217xx.h"
+#else
+ #error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0U, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0U, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+
+/**
+  * @}
+  */
+  
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f2xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F2xx_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/