diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-07-21 20:29:14 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-07-21 22:40:56 -0400 |
| commit | 893acdb56bddbe8c24b51050187325f71e439798 (patch) | |
| tree | 705cd4b3422c83967a8e0b4533aee21b32ea3b3d /lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c | |
| parent | 17bd595b155304e9f1defa480f5eb7d8c060d9d6 (diff) | |
| download | kutter-893acdb56bddbe8c24b51050187325f71e439798.tar.gz kutter-893acdb56bddbe8c24b51050187325f71e439798.tar.xz kutter-893acdb56bddbe8c24b51050187325f71e439798.zip | |
lib: Update stm32f1 code to version 1.8.0
Update the stm32f1 code to the latest from ST. Merge the
lib/cmsis-stm32f1/ and lib/hal-stm32f1/ into a single lib/stm32f1/
directory. Document all the differences from the pristine upstream
code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c')
| -rw-r--r-- | lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c b/lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c new file mode 100644 index 00000000..ade6b9a9 --- /dev/null +++ b/lib/stm32f1/hal/source/stm32f1xx_hal_pcd_ex.c @@ -0,0 +1,246 @@ +/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @brief PCD Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined (USB) || defined (USB_OTG_FS)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update FIFO configuration
+
+@endverbatim
+ * @{
+ */
+#if defined (USB_OTG_FS)
+/**
+ * @brief Set Tx FIFO
+ * @param hpcd PCD handle
+ * @param fifo The number of Tx fifo
+ * @param size Fifo size
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+ uint8_t i;
+ uint32_t Tx_Offset;
+
+ /* TXn min size = 16 words. (n : Transmit FIFO index)
+ When a TxFIFO is not used, the Configuration should be as follows:
+ case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txm can use the space allocated for Txn.
+ case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
+ --> Txn should be configured with the minimum space of 16 words
+ The FIFO is used optimally when used TxFIFOs are allocated in the top
+ of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+ When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+ Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+ if (fifo == 0U)
+ {
+ hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset;
+ }
+ else
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+ for (i = 0U; i < (fifo - 1U); i++)
+ {
+ Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+ }
+
+ /* Multiply Tx_Size by 2 to get higher performance */
+ hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Rx FIFO
+ * @param hpcd PCD handle
+ * @param size Size of Rx fifo
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+ hpcd->Instance->GRXFSIZ = size;
+
+ return HAL_OK;
+}
+#endif /* defined (USB_OTG_FS) */
+#if defined (USB)
+/**
+ * @brief Configure PMA for EP
+ * @param hpcd Device instance
+ * @param ep_addr endpoint address
+ * @param ep_kind endpoint Kind
+ * USB_SNG_BUF: Single Buffer used
+ * USB_DBL_BUF: Double Buffer used
+ * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
+ * this parameter is 16-bit value providing the address
+ * in PMA allocated to endpoint.
+ * In case of double buffer endpoint this parameter
+ * is a 32-bit value providing the endpoint buffer 0 address
+ * in the LSB part of 32-bit value and endpoint buffer 1 address
+ * in the MSB part of 32-bit value.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress)
+{
+ PCD_EPTypeDef *ep;
+
+ /* initialize ep structure*/
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ /* Here we check if the endpoint is single or double Buffer*/
+ if (ep_kind == PCD_SNG_BUF)
+ {
+ /* Single Buffer */
+ ep->doublebuffer = 0U;
+ /* Configure the PMA */
+ ep->pmaadress = (uint16_t)pmaadress;
+ }
+ else /* USB_DBL_BUF */
+ {
+ /* Double Buffer Endpoint */
+ ep->doublebuffer = 1U;
+ /* Configure the PMA */
+ ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU);
+ ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Software Device Connection,
+ * this function is not required by USB OTG FS peripheral, it is used
+ * only by USB Device FS peripheral.
+ * @param hpcd: PCD handle
+ * @param state: connection state (0 : disconnected / 1: connected)
+ * @retval None
+ */
+__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(state);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCDEx_SetConnectionState could be implemented in the user file
+ */
+}
+#endif /* defined (USB) */
+
+/**
+ * @brief Send LPM message to user layer callback.
+ * @param hpcd PCD handle
+ * @param msg LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCDEx_LPM_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Send BatteryCharging message to user layer callback.
+ * @param hpcd PCD handle
+ * @param msg LPM message
+ * @retval HAL status
+ */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(msg);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCDEx_BCD_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined (USB) || defined (USB_OTG_FS) */
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|