lib: Remove unused stm32f1 "hal" code

Now that the stm32f1 code has been merged into the stm32 code, there
is no longer a need to use the upstream stm32f1 "hal" code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 1003 deletions

diff --git a/lib/stm32f1/hal/include/stm32f1xx_ll_rtc.h b/lib/stm32f1/hal/include/stm32f1xx_ll_rtc.h
deleted file mode 100644
index 71f5d398..00000000
--- a/lib/stm32f1/hal/include/stm32f1xx_ll_rtc.h
+++ /dev/null
@@ -1,1003 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f1xx_ll_rtc.h

-  * @author  MCD Application Team

-  * @brief   Header file of RTC LL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F1xx_LL_RTC_H

-#define __STM32F1xx_LL_RTC_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f1xx.h"

-

-/** @addtogroup STM32F1xx_LL_Driver

-  * @{

-  */

-

-#if defined(RTC)

-

-/** @defgroup RTC_LL RTC

-  * @{

-  */

-

-/* Private types -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private constants ---------------------------------------------------------*/

-

-/* Private macros ------------------------------------------------------------*/

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup RTC_LL_Private_Macros RTC Private Macros

-  * @{

-  */

-/**

-  * @}

-  */

-#endif /*USE_FULL_LL_DRIVER*/

-

-/* Exported types ------------------------------------------------------------*/

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure

-  * @{

-  */

-

-/**

-  * @brief  RTC Init structures definition

-  */

-typedef struct

-{

-  uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value.

-                              This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF

-

-                              This feature can be modified afterwards using unitary function

-                              @ref LL_RTC_SetAsynchPrescaler(). */

-

-  uint32_t OutPutSource;    /*!< Specifies which signal will be routed to the RTC Tamper pin.

-                                 This parameter can be a value of @ref LL_RTC_Output_Source

-

-                              This feature can be modified afterwards using unitary function

-                              @ref LL_RTC_SetOutputSource(). */

-

-} LL_RTC_InitTypeDef;

-

-/**

-  * @brief  RTC Time structure definition

-  */

-typedef struct

-{

-  uint8_t Hours;       /*!< Specifies the RTC Time Hours.

-                            This parameter must be a number between Min_Data = 0 and Max_Data = 23 */

-

-  uint8_t Minutes;     /*!< Specifies the RTC Time Minutes.

-                            This parameter must be a number between Min_Data = 0 and Max_Data = 59 */

-

-  uint8_t Seconds;     /*!< Specifies the RTC Time Seconds.

-                            This parameter must be a number between Min_Data = 0 and Max_Data = 59 */

-} LL_RTC_TimeTypeDef;

-

-

-/**

-  * @brief  RTC Alarm structure definition

-  */

-typedef struct

-{

-  LL_RTC_TimeTypeDef AlarmTime;  /*!< Specifies the RTC Alarm Time members. */

-

-} LL_RTC_AlarmTypeDef;

-

-/**

-  * @}

-  */

-#endif /* USE_FULL_LL_DRIVER */

-

-/* Exported constants --------------------------------------------------------*/

-/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants

-  * @{

-  */

-

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup RTC_LL_EC_FORMAT FORMAT

-  * @{

-  */

-#define LL_RTC_FORMAT_BIN                  (0x000000000U) /*!< Binary data format */

-#define LL_RTC_FORMAT_BCD                  (0x000000001U) /*!< BCD data format */

-/**

-  * @}

-  */

-#endif /* USE_FULL_LL_DRIVER */

-

-/** @defgroup RTC_LL_EC_BKP  BACKUP

-  * @{

-  */

-#if RTC_BKP_NUMBER > 0

-#define LL_RTC_BKP_DR1                     (0x00000001U)

-#define LL_RTC_BKP_DR2                     (0x00000002U)

-#define LL_RTC_BKP_DR3                     (0x00000003U)

-#define LL_RTC_BKP_DR4                     (0x00000004U)

-#define LL_RTC_BKP_DR5                     (0x00000005U)

-#define LL_RTC_BKP_DR6                     (0x00000006U)

-#define LL_RTC_BKP_DR7                     (0x00000007U)

-#define LL_RTC_BKP_DR8                     (0x00000008U)

-#define LL_RTC_BKP_DR9                     (0x00000009U)

-#define LL_RTC_BKP_DR10                    (0x0000000AU)

-#endif /* RTC_BKP_NUMBER > 0 */

-#if RTC_BKP_NUMBER > 10

-#define LL_RTC_BKP_DR11                    (0x0000000BU)

-#define LL_RTC_BKP_DR12                    (0x0000000CU)

-#define LL_RTC_BKP_DR13                    (0x0000000DU)

-#define LL_RTC_BKP_DR14                    (0x0000000EU)

-#define LL_RTC_BKP_DR15                    (0x0000000FU)

-#define LL_RTC_BKP_DR16                    (0x00000010U)

-#define LL_RTC_BKP_DR17                    (0x00000011U)

-#define LL_RTC_BKP_DR18                    (0x00000012U)

-#define LL_RTC_BKP_DR19                    (0x00000013U)

-#define LL_RTC_BKP_DR20                    (0x00000014U)

-#define LL_RTC_BKP_DR21                    (0x00000015U)

-#define LL_RTC_BKP_DR22                    (0x00000016U)

-#define LL_RTC_BKP_DR23                    (0x00000017U)

-#define LL_RTC_BKP_DR24                    (0x00000018U)

-#define LL_RTC_BKP_DR25                    (0x00000019U)

-#define LL_RTC_BKP_DR26                    (0x0000001AU)

-#define LL_RTC_BKP_DR27                    (0x0000001BU)

-#define LL_RTC_BKP_DR28                    (0x0000001CU)

-#define LL_RTC_BKP_DR29                    (0x0000001DU)

-#define LL_RTC_BKP_DR30                    (0x0000001EU)

-#define LL_RTC_BKP_DR31                    (0x0000001FU)

-#define LL_RTC_BKP_DR32                    (0x00000020U)

-#define LL_RTC_BKP_DR33                    (0x00000021U)

-#define LL_RTC_BKP_DR34                    (0x00000022U)

-#define LL_RTC_BKP_DR35                    (0x00000023U)

-#define LL_RTC_BKP_DR36                    (0x00000024U)

-#define LL_RTC_BKP_DR37                    (0x00000025U)

-#define LL_RTC_BKP_DR38                    (0x00000026U)

-#define LL_RTC_BKP_DR39                    (0x00000027U)

-#define LL_RTC_BKP_DR40                    (0x00000028U)

-#define LL_RTC_BKP_DR41                    (0x00000029U)

-#define LL_RTC_BKP_DR42                    (0x0000002AU)

-#endif /* RTC_BKP_NUMBER > 10 */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EC_TAMPLEVEL  Tamper Active Level

-  * @{

-  */

-#define LL_RTC_TAMPER_ACTIVELEVEL_LOW          BKP_CR_TPAL           /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */

-#define LL_RTC_TAMPER_ACTIVELEVEL_HIGH         (0x00000000U)         /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */

-

-/**

-  * @}

-  */

-

-/** @defgroup LL_RTC_Output_Source         Clock Source to output on the Tamper Pin

-  * @{

-  */

-#define LL_RTC_CALIB_OUTPUT_NONE           (0x00000000U)                       /*!< Calibration output disabled */

-#define LL_RTC_CALIB_OUTPUT_RTCCLOCK       BKP_RTCCR_CCO                       /*!< Calibration output is RTC Clock with a frequency divided by 64 on the TAMPER Pin */

-#define LL_RTC_CALIB_OUTPUT_ALARM          BKP_RTCCR_ASOE                      /*!< Calibration output is Alarm pulse signal on the TAMPER pin */

-#define LL_RTC_CALIB_OUTPUT_SECOND        (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE)    /*!< Calibration output is Second pulse signal on the TAMPER pin*/

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros

-  * @{

-  */

-

-/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros

-  * @{

-  */

-

-/**

-  * @brief  Write a value in RTC register

-  * @param  __INSTANCE__ RTC Instance

-  * @param  __REG__ Register to be written

-  * @param  __VALUE__ Value to be written in the register

-  * @retval None

-  */

-#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))

-

-/**

-  * @brief  Read a value in RTC register

-  * @param  __INSTANCE__ RTC Instance

-  * @param  __REG__ Register to be read

-  * @retval Register value

-  */

-#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EM_Convert Convert helper Macros

-  * @{

-  */

-

-/**

-  * @brief  Helper macro to convert a value from 2 digit decimal format to BCD format

-  * @param  __VALUE__ Byte to be converted

-  * @retval Converted byte

-  */

-#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U))

-

-/**

-  * @brief  Helper macro to convert a value from BCD format to 2 digit decimal format

-  * @param  __VALUE__ BCD value to be converted

-  * @retval Converted byte

-  */

-#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU))

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions

-  * @{

-  */

-

-/** @defgroup RTC_LL_EF_Configuration Configuration

-  * @{

-  */

-

-/**

-  * @brief  Set Asynchronous prescaler factor

-  * @rmtoll PRLH         PRL      LL_RTC_SetAsynchPrescaler\n

-  * @rmtoll PRLL         PRL      LL_RTC_SetAsynchPrescaler\n

-  * @param  RTCx RTC Instance

-  * @param  AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0xFFFFF

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler)

-{

-  MODIFY_REG(RTCx->PRLH, RTC_PRLH_PRL, (AsynchPrescaler >> 16));

-  MODIFY_REG(RTCx->PRLL, RTC_PRLL_PRL, (AsynchPrescaler & RTC_PRLL_PRL));

-}

-

-/**

-  * @brief  Get Asynchronous prescaler factor

-  * @rmtoll DIVH         DIV      LL_RTC_GetDivider\n

-  * @rmtoll DIVL         DIV      LL_RTC_GetDivider\n

-  * @param  RTCx RTC Instance

-  * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFF

-  */

-__STATIC_INLINE uint32_t LL_RTC_GetDivider(RTC_TypeDef *RTCx)

-{

-  register uint16_t Highprescaler = 0, Lowprescaler = 0;

-  Highprescaler = READ_REG(RTCx->DIVH & RTC_DIVH_RTC_DIV);

-  Lowprescaler  = READ_REG(RTCx->DIVL & RTC_DIVL_RTC_DIV);

-

-  return (((uint32_t) Highprescaler << 16U) | Lowprescaler);

-}

-

-/**

-  * @brief  Set Output Source

-  * @rmtoll RTCCR         CCO      LL_RTC_SetOutputSource

-  * @rmtoll RTCCR         ASOE     LL_RTC_SetOutputSource

-  * @rmtoll RTCCR         ASOS     LL_RTC_SetOutputSource

-  * @param  BKPx BKP Instance

-  * @param  OutputSource This parameter can be one of the following values:

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_NONE

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_ALARM

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_SECOND

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_SetOutputSource(BKP_TypeDef *BKPx, uint32_t OutputSource)

-{

-  MODIFY_REG(BKPx->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS), OutputSource);

-}

-

-/**

-  * @brief  Get Output Source

-  * @rmtoll RTCCR         CCO      LL_RTC_GetOutPutSource

-  * @rmtoll RTCCR         ASOE     LL_RTC_GetOutPutSource

-  * @rmtoll RTCCR         ASOS     LL_RTC_GetOutPutSource

-  * @param  BKPx BKP Instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_NONE

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_RTCCLOCK

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_ALARM

-  *         @arg @ref LL_RTC_CALIB_OUTPUT_SECOND

-  */

-__STATIC_INLINE uint32_t LL_RTC_GetOutPutSource(BKP_TypeDef *BKPx)

-{

-  return (uint32_t)(READ_BIT(BKPx->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS)));

-}

-

-/**

-  * @brief  Enable the write protection for RTC registers.

-  * @rmtoll CRL          CNF           LL_RTC_EnableWriteProtection

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRL, RTC_CRL_CNF);

-}

-

-/**

-  * @brief  Disable the write protection for RTC registers.

-  * @rmtoll CRL          RTC_CRL_CNF           LL_RTC_DisableWriteProtection

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx)

-{

-  SET_BIT(RTCx->CRL, RTC_CRL_CNF);

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_Time Time

-  * @{

-  */

-

-/**

-  * @brief  Set time counter in BCD format

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @note   It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function)

-  * @rmtoll CNTH         CNT            LL_RTC_TIME_Set\n

-  *         CNTL         CNT            LL_RTC_TIME_Set\n

-  * @param  RTCx RTC Instance

-  * @param  TimeCounter Value between Min_Data=0x00 and Max_Data=0xFFFFF

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_TIME_Set(RTC_TypeDef *RTCx, uint32_t TimeCounter)

-{

-  /* Set RTC COUNTER MSB word */

-  WRITE_REG(RTCx->CNTH, (TimeCounter >> 16U));

-  /* Set RTC COUNTER LSB word */

-  WRITE_REG(RTCx->CNTL, (TimeCounter & RTC_CNTL_RTC_CNT));

-}

-

-/**

-  * @brief  Get time counter in BCD format

-  * @rmtoll CNTH         CNT            LL_RTC_TIME_Get\n

-  *         CNTL         CNT            LL_RTC_TIME_Get\n

-  * @param  RTCx RTC Instance

-  * @retval Value between Min_Data = 0 and Max_Data = 0xFFFFF

-  */

-__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx)

-{

-  register uint16_t high = 0, low = 0;

-

-  high = READ_REG(RTCx->CNTH & RTC_CNTH_RTC_CNT);

-  low  = READ_REG(RTCx->CNTL & RTC_CNTL_RTC_CNT);

-  return ((uint32_t)(((uint32_t) high << 16U) | low));

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_ALARM  ALARM

-  * @{

-  */

-

-/**

-  * @brief  Set Alarm Counter

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll ALRH           ALR         LL_RTC_ALARM_Set\n

-  * @rmtoll ALRL           ALR         LL_RTC_ALARM_Set\n

-  * @param  RTCx RTC Instance

-  * @param  AlarmCounter Value between Min_Data=0x00 and Max_Data=0xFFFFF

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ALARM_Set(RTC_TypeDef *RTCx, uint32_t AlarmCounter)

-{

-  /* Set RTC COUNTER MSB word */

-  WRITE_REG(RTCx->ALRH, (AlarmCounter >> 16));

-  /* Set RTC COUNTER LSB word */

-  WRITE_REG(RTCx->ALRL, (AlarmCounter & RTC_ALRL_RTC_ALR));

-}

-

-/**

-  * @brief  Get Alarm Counter

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll ALRH           ALR         LL_RTC_ALARM_Get\n

-  * @rmtoll ALRL           ALR         LL_RTC_ALARM_Get\n

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE uint32_t LL_RTC_ALARM_Get(RTC_TypeDef *RTCx)

-{

-  register uint16_t high = 0, low = 0;

-

-  high  = READ_REG(RTCx->ALRH & RTC_ALRH_RTC_ALR);

-  low   = READ_REG(RTCx->ALRL & RTC_ALRL_RTC_ALR);

-

-  return (((uint32_t) high << 16U) | low);

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_Tamper Tamper

-  * @{

-  */

-

-/**

-  * @brief  Enable RTC_TAMPx input detection

-  * @rmtoll CR    TPE        LL_RTC_TAMPER_Enable\n

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_TAMPER_Enable(BKP_TypeDef *BKPx)

-{

-  SET_BIT(BKPx->CR, BKP_CR_TPE);

-}

-

-/**

-  * @brief  Disable RTC_TAMPx Tamper

-  * @rmtoll CR    TPE        LL_RTC_TAMPER_Disable\n

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_TAMPER_Disable(BKP_TypeDef *BKPx)

-{

-  CLEAR_BIT(BKP->CR, BKP_CR_TPE);

-}

-

-/**

-  * @brief  Enable Active level for Tamper input

-  * @rmtoll CR    TPAL        LL_RTC_TAMPER_SetActiveLevel\n

-  * @param  BKPx  BKP Instance

-  * @param  Tamper This parameter can be a combination of the following values:

-  *         @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_LOW

-  *         @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_HIGH

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_TAMPER_SetActiveLevel(BKP_TypeDef *BKPx, uint32_t Tamper)

-{

-  MODIFY_REG(BKPx->CR, BKP_CR_TPAL, Tamper);

-}

-

-/**

-  * @brief  Disable Active level for Tamper input

-  * @rmtoll CR    TPAL        LL_RTC_TAMPER_SetActiveLevel\n

-  * @retval None

-  */

-__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetActiveLevel(BKP_TypeDef *BKPx)

-{

-  return (uint32_t)(READ_BIT(BKPx->CR, BKP_CR_TPAL));

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers

-  * @{

-  */

-

-/**

-  * @brief  Writes a data in a specified RTC Backup data register.

-  * @rmtoll BKPDR        DR           LL_RTC_BKP_SetRegister

-  * @param  BKPx  BKP Instance

-  * @param  BackupRegister This parameter can be one of the following values:

-  *         @arg @ref LL_RTC_BKP_DR1

-  *         @arg @ref LL_RTC_BKP_DR2

-  *         @arg @ref LL_RTC_BKP_DR3

-  *         @arg @ref LL_RTC_BKP_DR4

-  *         @arg @ref LL_RTC_BKP_DR5

-  *         @arg @ref LL_RTC_BKP_DR6

-  *         @arg @ref LL_RTC_BKP_DR7

-  *         @arg @ref LL_RTC_BKP_DR8

-  *         @arg @ref LL_RTC_BKP_DR9

-  *         @arg @ref LL_RTC_BKP_DR10

-  *         @arg @ref LL_RTC_BKP_DR11 (*)

-  *         @arg @ref LL_RTC_BKP_DR12 (*)

-  *         @arg @ref LL_RTC_BKP_DR13 (*)

-  *         @arg @ref LL_RTC_BKP_DR14 (*)

-  *         @arg @ref LL_RTC_BKP_DR15 (*)

-  *         @arg @ref LL_RTC_BKP_DR16 (*)

-  *         @arg @ref LL_RTC_BKP_DR17 (*)

-  *         @arg @ref LL_RTC_BKP_DR18 (*)

-  *         @arg @ref LL_RTC_BKP_DR19 (*)

-  *         @arg @ref LL_RTC_BKP_DR20 (*)

-  *         @arg @ref LL_RTC_BKP_DR21 (*)

-  *         @arg @ref LL_RTC_BKP_DR22 (*)

-  *         @arg @ref LL_RTC_BKP_DR23 (*)

-  *         @arg @ref LL_RTC_BKP_DR24 (*)

-  *         @arg @ref LL_RTC_BKP_DR25 (*)

-  *         @arg @ref LL_RTC_BKP_DR26 (*)

-  *         @arg @ref LL_RTC_BKP_DR27 (*)

-  *         @arg @ref LL_RTC_BKP_DR28 (*)

-  *         @arg @ref LL_RTC_BKP_DR29 (*)

-  *         @arg @ref LL_RTC_BKP_DR30 (*)

-  *         @arg @ref LL_RTC_BKP_DR31 (*)

-  *         @arg @ref LL_RTC_BKP_DR32 (*)

-  *         @arg @ref LL_RTC_BKP_DR33 (*)

-  *         @arg @ref LL_RTC_BKP_DR34 (*)

-  *         @arg @ref LL_RTC_BKP_DR35 (*)

-  *         @arg @ref LL_RTC_BKP_DR36 (*)

-  *         @arg @ref LL_RTC_BKP_DR37 (*)

-  *         @arg @ref LL_RTC_BKP_DR38 (*)

-  *         @arg @ref LL_RTC_BKP_DR39 (*)

-  *         @arg @ref LL_RTC_BKP_DR40 (*)

-  *         @arg @ref LL_RTC_BKP_DR41 (*)

-  *         @arg @ref LL_RTC_BKP_DR42 (*)

-  *         (*) value not defined in all devices.

-  * @param  Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_BKP_SetRegister(BKP_TypeDef *BKPx, uint32_t BackupRegister, uint32_t Data)

-{

-  register uint32_t tmp = 0U;

-

-  tmp = (uint32_t)BKP_BASE;

-  tmp += (BackupRegister * 4U);

-

-  /* Write the specified register */

-  *(__IO uint32_t *)tmp = (uint32_t)Data;

-}

-

-/**

-  * @brief  Reads data from the specified RTC Backup data Register.

-  * @rmtoll BKPDR        DR           LL_RTC_BKP_GetRegister

-  * @param  BKPx BKP Instance

-  * @param  BackupRegister This parameter can be one of the following values:

-  *         @arg @ref LL_RTC_BKP_DR1

-  *         @arg @ref LL_RTC_BKP_DR2

-  *         @arg @ref LL_RTC_BKP_DR3

-  *         @arg @ref LL_RTC_BKP_DR4

-  *         @arg @ref LL_RTC_BKP_DR5

-  *         @arg @ref LL_RTC_BKP_DR6

-  *         @arg @ref LL_RTC_BKP_DR7

-  *         @arg @ref LL_RTC_BKP_DR8

-  *         @arg @ref LL_RTC_BKP_DR9

-  *         @arg @ref LL_RTC_BKP_DR10

-  *         @arg @ref LL_RTC_BKP_DR11 (*)

-  *         @arg @ref LL_RTC_BKP_DR12 (*)

-  *         @arg @ref LL_RTC_BKP_DR13 (*)

-  *         @arg @ref LL_RTC_BKP_DR14 (*)

-  *         @arg @ref LL_RTC_BKP_DR15 (*)

-  *         @arg @ref LL_RTC_BKP_DR16 (*)

-  *         @arg @ref LL_RTC_BKP_DR17 (*)

-  *         @arg @ref LL_RTC_BKP_DR18 (*)

-  *         @arg @ref LL_RTC_BKP_DR19 (*)

-  *         @arg @ref LL_RTC_BKP_DR20 (*)

-  *         @arg @ref LL_RTC_BKP_DR21 (*)

-  *         @arg @ref LL_RTC_BKP_DR22 (*)

-  *         @arg @ref LL_RTC_BKP_DR23 (*)

-  *         @arg @ref LL_RTC_BKP_DR24 (*)

-  *         @arg @ref LL_RTC_BKP_DR25 (*)

-  *         @arg @ref LL_RTC_BKP_DR26 (*)

-  *         @arg @ref LL_RTC_BKP_DR27 (*)

-  *         @arg @ref LL_RTC_BKP_DR28 (*)

-  *         @arg @ref LL_RTC_BKP_DR29 (*)

-  *         @arg @ref LL_RTC_BKP_DR30 (*)

-  *         @arg @ref LL_RTC_BKP_DR31 (*)

-  *         @arg @ref LL_RTC_BKP_DR32 (*)

-  *         @arg @ref LL_RTC_BKP_DR33 (*)

-  *         @arg @ref LL_RTC_BKP_DR34 (*)

-  *         @arg @ref LL_RTC_BKP_DR35 (*)

-  *         @arg @ref LL_RTC_BKP_DR36 (*)

-  *         @arg @ref LL_RTC_BKP_DR37 (*)

-  *         @arg @ref LL_RTC_BKP_DR38 (*)

-  *         @arg @ref LL_RTC_BKP_DR39 (*)

-  *         @arg @ref LL_RTC_BKP_DR40 (*)

-  *         @arg @ref LL_RTC_BKP_DR41 (*)

-  *         @arg @ref LL_RTC_BKP_DR42 (*)

-  * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF

-  */

-__STATIC_INLINE uint32_t LL_RTC_BKP_GetRegister(BKP_TypeDef *BKPx, uint32_t BackupRegister)

-{

-  register uint32_t tmp = 0U;

-

-  tmp = (uint32_t)BKP_BASE;

-  tmp += (BackupRegister * 4U);

-

-  /* Read the specified register */

-  return ((*(__IO uint32_t *)tmp) & BKP_DR1_D);

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_Calibration Calibration

-  * @{

-  */

-

-/**

-  * @brief  Set the coarse digital calibration

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @note   It can be written in initialization mode only (@ref LL_RTC_EnterInitMode function)

-  * @rmtoll RTCCR       CAL           LL_RTC_CAL_SetCoarseDigital\n

-  * @param  BKPx RTC Instance

-  * @param  Value value of coarse calibration expressed in ppm (coded on 5 bits)

-  * @note   This Calibration value should be between 0 and 121 when using positive sign with a 4-ppm step.

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_CAL_SetCoarseDigital(BKP_TypeDef *BKPx, uint32_t Value)

-{

-  MODIFY_REG(BKPx->RTCCR, BKP_RTCCR_CAL, Value);

-}

-

-/**

-  * @brief  Get the coarse digital calibration value

-  * @rmtoll RTCCR       CAL           LL_RTC_CAL_SetCoarseDigital\n

-  * @param  BKPx BKP Instance

-  * @retval value of coarse calibration expressed in ppm (coded on 5 bits)

-  */

-__STATIC_INLINE uint32_t LL_RTC_CAL_GetCoarseDigital(BKP_TypeDef *BKPx)

-{

-  return (uint32_t)(READ_BIT(BKPx->RTCCR, BKP_RTCCR_CAL));

-}

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management

-  * @{

-  */

-

-/**

-  * @brief  Get RTC_TAMPI  Interruption detection flag

-  * @rmtoll CSR          TIF        LL_RTC_IsActiveFlag_TAMPI

-  * @param  BKPx BKP Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMPI(BKP_TypeDef *BKPx)

-{

-  return (READ_BIT(BKPx->CSR, BKP_CSR_TIF) == (BKP_CSR_TIF));

-}

-

-/**

-  * @brief  Clear RTC_TAMP Interruption detection flag

-  * @rmtoll CSR          CTI         LL_RTC_ClearFlag_TAMPI

-  * @param  BKPx BKP Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_TAMPI(BKP_TypeDef *BKPx)

-{

-  SET_BIT(BKPx->CSR, BKP_CSR_CTI);

-}

-

-/**

-  * @brief  Get RTC_TAMPE  Event detection flag

-  * @rmtoll CSR          TEF        LL_RTC_IsActiveFlag_TAMPE

-  * @param  BKPx BKP Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMPE(BKP_TypeDef *BKPx)

-{

-  return (READ_BIT(BKPx->CSR, BKP_CSR_TEF) == (BKP_CSR_TEF));

-}

-

-/**

-  * @brief  Clear RTC_TAMPE Even detection flag

-  * @rmtoll CSR          CTE         LL_RTC_ClearFlag_TAMPE

-  * @param  BKPx BKP Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_TAMPE(BKP_TypeDef *BKPx)

-{

-  SET_BIT(BKPx->CSR, BKP_CSR_CTE);

-}

-

-/**

-  * @brief  Get Alarm  flag

-  * @rmtoll CRL          ALRF         LL_RTC_IsActiveFlag_ALR

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALR(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRL, RTC_CRL_ALRF) == (RTC_CRL_ALRF));

-}

-

-/**

-  * @brief  Clear Alarm flag

-  * @rmtoll CRL          ALRF         LL_RTC_ClearFlag_ALR

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_ALR(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRL, RTC_CRL_ALRF);

-}

-

-/**

-  * @brief  Get Registers synchronization flag

-  * @rmtoll CRL          RSF           LL_RTC_IsActiveFlag_RS

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRL, RTC_CRL_RSF) == (RTC_CRL_RSF));

-}

-

-/**

-  * @brief  Clear Registers synchronization flag

-  * @rmtoll CRL          RSF           LL_RTC_ClearFlag_RS

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRL, RTC_CRL_RSF);

-}

-

-/**

-  * @brief  Get Registers OverFlow flag

-  * @rmtoll CRL          OWF           LL_RTC_IsActiveFlag_OW

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_OW(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRL, RTC_CRL_OWF) == (RTC_CRL_OWF));

-}

-

-/**

-  * @brief  Clear Registers OverFlow flag

-  * @rmtoll CRL          OWF           LL_RTC_ClearFlag_OW

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_OW(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRL, RTC_CRL_OWF);

-}

-

-/**

-  * @brief  Get Registers synchronization flag

-  * @rmtoll CRL          SECF           LL_RTC_IsActiveFlag_SEC

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SEC(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRL, RTC_CRL_SECF) == (RTC_CRL_SECF));

-}

-

-/**

-  * @brief  Clear Registers synchronization flag

-  * @rmtoll CRL          SECF           LL_RTC_ClearFlag_SEC

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_ClearFlag_SEC(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRL, RTC_CRL_SECF);

-}

-

-/**

-  * @brief  Get RTC Operation OFF status flag

-  * @rmtoll CRL          RTOFF         LL_RTC_IsActiveFlag_RTOF

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RTOF(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRL, RTC_CRL_RTOFF) == (RTC_CRL_RTOFF));

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup RTC_LL_EF_IT_Management IT_Management

-  * @{

-  */

-

-/**

-  * @brief  Enable Alarm  interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           ALRIE        LL_RTC_EnableIT_ALR

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_EnableIT_ALR(RTC_TypeDef *RTCx)

-{

-  SET_BIT(RTCx->CRH, RTC_CRH_ALRIE);

-}

-

-/**

-  * @brief  Disable Alarm  interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           ALRIE        LL_RTC_DisableIT_ALR

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_DisableIT_ALR(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRH, RTC_CRH_ALRIE);

-}

-

-/**

-  * @brief  Check if  Alarm  interrupt is enabled or not

-  * @rmtoll CRH           ALRIE        LL_RTC_IsEnabledIT_ALR

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALR(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRH, RTC_CRH_ALRIE) == (RTC_CRH_ALRIE));

-}

-

-/**

-  * @brief  Enable Second Interrupt interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           SECIE        LL_RTC_EnableIT_SEC

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_EnableIT_SEC(RTC_TypeDef *RTCx)

-{

-  SET_BIT(RTCx->CRH, RTC_CRH_SECIE);

-}

-

-/**

-  * @brief  Disable Second interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           SECIE        LL_RTC_DisableIT_SEC

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_DisableIT_SEC(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRH, RTC_CRH_SECIE);

-}

-

-/**

-  * @brief  Check if  Second interrupt is enabled or not

-  * @rmtoll CRH           SECIE        LL_RTC_IsEnabledIT_SEC

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_SEC(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRH, RTC_CRH_SECIE) == (RTC_CRH_SECIE));

-}

-

-/**

-  * @brief  Enable OverFlow interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           OWIE        LL_RTC_EnableIT_OW

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_EnableIT_OW(RTC_TypeDef *RTCx)

-{

-  SET_BIT(RTCx->CRH, RTC_CRH_OWIE);

-}

-

-/**

-  * @brief  Disable OverFlow interrupt

-  * @note   Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.

-  * @rmtoll CRH           OWIE        LL_RTC_DisableIT_OW

-  * @param  RTCx RTC Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_DisableIT_OW(RTC_TypeDef *RTCx)

-{

-  CLEAR_BIT(RTCx->CRH, RTC_CRH_OWIE);

-}

-

-/**

-  * @brief  Check if  OverFlow interrupt is enabled or not

-  * @rmtoll CRH            OWIE       LL_RTC_IsEnabledIT_OW

-  * @param  RTCx RTC Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_OW(RTC_TypeDef *RTCx)

-{

-  return (READ_BIT(RTCx->CRH, RTC_CRH_OWIE) == (RTC_CRH_OWIE));

-}

-

-/**

-  * @brief  Enable Tamper  interrupt

-  * @rmtoll CSR        TPIE       LL_RTC_EnableIT_TAMP

-  * @param  BKPx BKP Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_EnableIT_TAMP(BKP_TypeDef *BKPx)

-{

-  SET_BIT(BKPx->CSR, BKP_CSR_TPIE);

-}

-

-/**

-  * @brief  Disable Tamper  interrupt

-  * @rmtoll CSR        TPIE       LL_RTC_EnableIT_TAMP

-  * @param  BKPx BKP Instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_RTC_DisableIT_TAMP(BKP_TypeDef *BKPx)

-{

-  CLEAR_BIT(BKPx->CSR, BKP_CSR_TPIE);

-}

-

-/**

-  * @brief  Check if all the TAMPER interrupts are enabled or not

-  * @rmtoll CSR        TPIE        LL_RTC_IsEnabledIT_TAMP

-  * @param  BKPx BKP Instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(BKP_TypeDef *BKPx)

-{

-  return (READ_BIT(BKPx->CSR, BKP_CSR_TPIE) == BKP_CSR_TPIE);

-}

-/**

-  * @}

-  */

-

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions

-  * @{

-  */

-

-ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx);

-ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct);

-void        LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct);

-ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct);

-void        LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct);

-ErrorStatus LL_RTC_ALARM_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct);

-void        LL_RTC_ALARM_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct);

-ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx);

-ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx);

-ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx);

-ErrorStatus LL_RTC_TIME_SetCounter(RTC_TypeDef *RTCx, uint32_t TimeCounter);

-ErrorStatus LL_RTC_ALARM_SetCounter(RTC_TypeDef *RTCx, uint32_t AlarmCounter);

-

-/**

-  * @}

-  */

-#endif /* USE_FULL_LL_DRIVER */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* defined(RTC) */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F1xx_LL_RTC_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/