lib: Remove unused stm32f1 "hal" code

Now that the stm32f1 code has been merged into the stm32 code, there
is no longer a need to use the upstream stm32f1 "hal" code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 412 deletions

diff --git a/lib/stm32f1/hal/include/stm32f1xx_hal_rtc_ex.h b/lib/stm32f1/hal/include/stm32f1xx_hal_rtc_ex.h
deleted file mode 100644
index 9185b6eb..00000000
--- a/lib/stm32f1/hal/include/stm32f1xx_hal_rtc_ex.h
+++ /dev/null
@@ -1,412 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f1xx_hal_rtc_ex.h

-  * @author  MCD Application Team

-  * @brief   Header file of RTC HAL Extension module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F1xx_HAL_RTC_EX_H

-#define __STM32F1xx_HAL_RTC_EX_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f1xx_hal_def.h"

-

-/** @addtogroup STM32F1xx_HAL_Driver

-  * @{

-  */

-

-/** @addtogroup RTCEx

-  * @{

-  */

-

-/** @addtogroup RTCEx_Private_Macros

-  * @{

-  */

-

-/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy

-  * @{

-  */

-#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters

-  * @{

-  */

-#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)

-

-#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__)  (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \

-                                             ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))

-

-#if RTC_BKP_NUMBER > 10U

-#define IS_RTC_BKP(BKP)                   (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42)))

-#else

-#define IS_RTC_BKP(BKP)                   ((BKP) <= (uint32_t)RTC_BKP_NUMBER)

-#endif

-#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU)

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported types ------------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types

-  * @{

-  */

-/**

-  * @brief  RTC Tamper structure definition

-  */

-typedef struct

-{

-  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.

-                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */

-

-  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.

-                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */

-

-} RTC_TamperTypeDef;

-

-/**

-  * @}

-  */

-

-/* Exported constants --------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants

-  * @{

-  */

-

-/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions

-  * @{

-  */

-#define RTC_TAMPER_1                        BKP_CR_TPE            /*!< Select tamper to be enabled (mainly for legacy purposes) */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions

-  * @{

-  */

-#define RTC_TAMPERTRIGGER_LOWLEVEL          BKP_CR_TPAL           /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */

-#define RTC_TAMPERTRIGGER_HIGHLEVEL         0x00000000U           /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */

-

-/**

-  * @}

-  */

-

-/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions

-  * @{

-  */

-#if RTC_BKP_NUMBER > 0U

-#define RTC_BKP_DR1                         0x00000001U

-#define RTC_BKP_DR2                         0x00000002U

-#define RTC_BKP_DR3                         0x00000003U

-#define RTC_BKP_DR4                         0x00000004U

-#define RTC_BKP_DR5                         0x00000005U

-#define RTC_BKP_DR6                         0x00000006U

-#define RTC_BKP_DR7                         0x00000007U

-#define RTC_BKP_DR8                         0x00000008U

-#define RTC_BKP_DR9                         0x00000009U

-#define RTC_BKP_DR10                        0x0000000AU

-#endif /* RTC_BKP_NUMBER > 0 */

-

-#if RTC_BKP_NUMBER > 10U

-#define RTC_BKP_DR11                        0x00000010U

-#define RTC_BKP_DR12                        0x00000011U

-#define RTC_BKP_DR13                        0x00000012U

-#define RTC_BKP_DR14                        0x00000013U

-#define RTC_BKP_DR15                        0x00000014U

-#define RTC_BKP_DR16                        0x00000015U

-#define RTC_BKP_DR17                        0x00000016U

-#define RTC_BKP_DR18                        0x00000017U

-#define RTC_BKP_DR19                        0x00000018U

-#define RTC_BKP_DR20                        0x00000019U

-#define RTC_BKP_DR21                        0x0000001AU

-#define RTC_BKP_DR22                        0x0000001BU

-#define RTC_BKP_DR23                        0x0000001CU

-#define RTC_BKP_DR24                        0x0000001DU

-#define RTC_BKP_DR25                        0x0000001EU

-#define RTC_BKP_DR26                        0x0000001FU

-#define RTC_BKP_DR27                        0x00000020U

-#define RTC_BKP_DR28                        0x00000021U

-#define RTC_BKP_DR29                        0x00000022U

-#define RTC_BKP_DR30                        0x00000023U

-#define RTC_BKP_DR31                        0x00000024U

-#define RTC_BKP_DR32                        0x00000025U

-#define RTC_BKP_DR33                        0x00000026U

-#define RTC_BKP_DR34                        0x00000027U

-#define RTC_BKP_DR35                        0x00000028U

-#define RTC_BKP_DR36                        0x00000029U

-#define RTC_BKP_DR37                        0x0000002AU

-#define RTC_BKP_DR38                        0x0000002BU

-#define RTC_BKP_DR39                        0x0000002CU

-#define RTC_BKP_DR40                        0x0000002DU

-#define RTC_BKP_DR41                        0x0000002EU

-#define RTC_BKP_DR42                        0x0000002FU

-#endif /* RTC_BKP_NUMBER > 10 */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros

-  * @{

-  */

-

-/**

-  * @brief  Enable the RTC Tamper interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled

-  *          This parameter can be any combination of the following values:

-  *            @arg RTC_IT_TAMP1: Tamper A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC Tamper interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.

-  *         This parameter can be any combination of the following values:

-  *            @arg RTC_IT_TAMP1: Tamper A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT(BKP->CSR, (__INTERRUPT__))

-

-/**

-  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.

-  *         This parameter can be:

-  *            @arg  RTC_IT_TAMP1

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC Tamper's flag status.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_TAMP1F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)       ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC Tamper's flag status.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.

-  *         This parameter can be:

-  *            @arg  RTC_IT_TAMP1

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Clear the RTC Tamper's pending flags.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_TAMP1F

-  * @retval None

-  */

-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)     SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)

-

-/**

-  * @brief  Enable the RTC Second interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled

-  *          This parameter can be any combination of the following values:

-  *            @arg RTC_IT_SEC: Second A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC Second interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.

-  *         This parameter can be any combination of the following values:

-  *            @arg RTC_IT_SEC: Second A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

-

-/**

-  * @brief  Check whether the specified RTC Second interrupt has occurred or not.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_SEC: Second A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)      ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC Second's flag status.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.

-  *          This parameter can be:

-  *            @arg RTC_FLAG_SEC

-  * @retval None

-  */

-#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Clear the RTC Second's pending flags.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_SEC

-  * @retval None

-  */

-#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)

-

-/**

-  * @brief  Enable the RTC Overflow interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled

-  *          This parameter can be any combination of the following values:

-  *            @arg RTC_IT_OW: Overflow A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

-

-/**

-  * @brief  Disable the RTC Overflow interrupt.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.

-  *         This parameter can be any combination of the following values:

-  *            @arg RTC_IT_OW: Overflow A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

-

-/**

-  * @brief  Check whether the specified RTC Overflow interrupt has occurred or not.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_IT_OW: Overflow A interrupt

-  * @retval None

-  */

-#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)

-

-/**

-  * @brief  Get the selected RTC Overflow's flag status.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.

-  *          This parameter can be:

-  *            @arg RTC_FLAG_OW

-  * @retval None

-  */

-#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)

-

-/**

-  * @brief  Clear the RTC Overflow's pending flags.

-  * @param  __HANDLE__: specifies the RTC handle.

-  * @param  __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.

-  *         This parameter can be:

-  *            @arg RTC_FLAG_OW

-  * @retval None

-  */

-#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)

-

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-/** @addtogroup RTCEx_Exported_Functions

-  * @{

-  */

-

-/* RTC Tamper functions *****************************************/

-/** @addtogroup RTCEx_Exported_Functions_Group1

-  * @{

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);

-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);

-void              HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

-

-/**

-  * @}

-  */

-

-/* RTC Second functions *****************************************/

-/** @addtogroup RTCEx_Exported_Functions_Group2

-  * @{

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);

-HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);

-void              HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);

-

-/**

-  * @}

-  */

-

-/* Extension Control functions ************************************************/

-/** @addtogroup RTCEx_Exported_Functions_Group3

-  * @{

-  */

-void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);

-uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);

-

-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F1xx_HAL_RTC_EX_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/