lib: Add Atmel SAM E70 headers

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 73 insertions, 0 deletions

diff --git a/lib/same70b/include/instance/uart2.h b/lib/same70b/include/instance/uart2.h
new file mode 100644
index 00000000..34f0a40b
--- /dev/null
+++ b/lib/same70b/include/instance/uart2.h
@@ -0,0 +1,73 @@
+/**
+ * \file
+ *
+ * \brief Instance description for UART2
+ *
+ * Copyright (c) 2019 Microchip Technology Inc.
+ *
+ * \license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \license_stop
+ *
+ */
+
+/* file generated from device description version 2019-01-18T21:19:59Z */
+#ifndef _SAME70_UART2_INSTANCE_H_
+#define _SAME70_UART2_INSTANCE_H_
+
+/* ========== Register definition for UART2 peripheral ========== */
+#if (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__))
+
+#define REG_UART2_CR            (0x400E1A00) /**< (UART2) Control Register */
+#define REG_UART2_MR            (0x400E1A04) /**< (UART2) Mode Register */
+#define REG_UART2_IER           (0x400E1A08) /**< (UART2) Interrupt Enable Register */
+#define REG_UART2_IDR           (0x400E1A0C) /**< (UART2) Interrupt Disable Register */
+#define REG_UART2_IMR           (0x400E1A10) /**< (UART2) Interrupt Mask Register */
+#define REG_UART2_SR            (0x400E1A14) /**< (UART2) Status Register */
+#define REG_UART2_RHR           (0x400E1A18) /**< (UART2) Receive Holding Register */
+#define REG_UART2_THR           (0x400E1A1C) /**< (UART2) Transmit Holding Register */
+#define REG_UART2_BRGR          (0x400E1A20) /**< (UART2) Baud Rate Generator Register */
+#define REG_UART2_CMPR          (0x400E1A24) /**< (UART2) Comparison Register */
+#define REG_UART2_WPMR          (0x400E1AE4) /**< (UART2) Write Protection Mode Register */
+
+#else
+
+#define REG_UART2_CR            (*(__O  uint32_t*)0x400E1A00U) /**< (UART2) Control Register */
+#define REG_UART2_MR            (*(__IO uint32_t*)0x400E1A04U) /**< (UART2) Mode Register */
+#define REG_UART2_IER           (*(__O  uint32_t*)0x400E1A08U) /**< (UART2) Interrupt Enable Register */
+#define REG_UART2_IDR           (*(__O  uint32_t*)0x400E1A0CU) /**< (UART2) Interrupt Disable Register */
+#define REG_UART2_IMR           (*(__I  uint32_t*)0x400E1A10U) /**< (UART2) Interrupt Mask Register */
+#define REG_UART2_SR            (*(__I  uint32_t*)0x400E1A14U) /**< (UART2) Status Register */
+#define REG_UART2_RHR           (*(__I  uint32_t*)0x400E1A18U) /**< (UART2) Receive Holding Register */
+#define REG_UART2_THR           (*(__O  uint32_t*)0x400E1A1CU) /**< (UART2) Transmit Holding Register */
+#define REG_UART2_BRGR          (*(__IO uint32_t*)0x400E1A20U) /**< (UART2) Baud Rate Generator Register */
+#define REG_UART2_CMPR          (*(__IO uint32_t*)0x400E1A24U) /**< (UART2) Comparison Register */
+#define REG_UART2_WPMR          (*(__IO uint32_t*)0x400E1AE4U) /**< (UART2) Write Protection Mode Register */
+
+#endif /* (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance Parameter definitions for UART2 peripheral ========== */
+#define UART2_DMAC_ID_RX                         25         
+#define UART2_DMAC_ID_TX                         24         
+#define UART2_INSTANCE_ID                        44         
+#define UART2_CLOCK_ID                           44         
+#define UART2_BRSRCCK_PERIPH_CLK                 0          /* MCK */
+#define UART2_BRSRCCK_PMC_PCK                    0          /* PCK4 */
+
+#endif /* _SAME70_UART2_INSTANCE_ */