lib: Add Atmel SAM E70 headers

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 157 insertions, 0 deletions

diff --git a/lib/same70b/include/instance/tc2.h b/lib/same70b/include/instance/tc2.h
new file mode 100644
index 00000000..c7069930
--- /dev/null
+++ b/lib/same70b/include/instance/tc2.h
@@ -0,0 +1,157 @@
+/**
+ * \file
+ *
+ * \brief Instance description for TC2
+ *
+ * Copyright (c) 2019 Microchip Technology Inc.
+ *
+ * \license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \license_stop
+ *
+ */
+
+/* file generated from device description version 2019-01-18T21:19:59Z */
+#ifndef _SAME70_TC2_INSTANCE_H_
+#define _SAME70_TC2_INSTANCE_H_
+
+/* ========== Register definition for TC2 peripheral ========== */
+#if (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__))
+
+#define REG_TC2_CCR0            (0x40014000) /**< (TC2) Channel Control Register (channel = 0) 0 */
+#define REG_TC2_CMR0            (0x40014004) /**< (TC2) Channel Mode Register (channel = 0) 0 */
+#define REG_TC2_SMMR0           (0x40014008) /**< (TC2) Stepper Motor Mode Register (channel = 0) 0 */
+#define REG_TC2_RAB0            (0x4001400C) /**< (TC2) Register AB (channel = 0) 0 */
+#define REG_TC2_CV0             (0x40014010) /**< (TC2) Counter Value (channel = 0) 0 */
+#define REG_TC2_RA0             (0x40014014) /**< (TC2) Register A (channel = 0) 0 */
+#define REG_TC2_RB0             (0x40014018) /**< (TC2) Register B (channel = 0) 0 */
+#define REG_TC2_RC0             (0x4001401C) /**< (TC2) Register C (channel = 0) 0 */
+#define REG_TC2_SR0             (0x40014020) /**< (TC2) Status Register (channel = 0) 0 */
+#define REG_TC2_IER0            (0x40014024) /**< (TC2) Interrupt Enable Register (channel = 0) 0 */
+#define REG_TC2_IDR0            (0x40014028) /**< (TC2) Interrupt Disable Register (channel = 0) 0 */
+#define REG_TC2_IMR0            (0x4001402C) /**< (TC2) Interrupt Mask Register (channel = 0) 0 */
+#define REG_TC2_EMR0            (0x40014030) /**< (TC2) Extended Mode Register (channel = 0) 0 */
+#define REG_TC2_CCR1            (0x40014040) /**< (TC2) Channel Control Register (channel = 0) 1 */
+#define REG_TC2_CMR1            (0x40014044) /**< (TC2) Channel Mode Register (channel = 0) 1 */
+#define REG_TC2_SMMR1           (0x40014048) /**< (TC2) Stepper Motor Mode Register (channel = 0) 1 */
+#define REG_TC2_RAB1            (0x4001404C) /**< (TC2) Register AB (channel = 0) 1 */
+#define REG_TC2_CV1             (0x40014050) /**< (TC2) Counter Value (channel = 0) 1 */
+#define REG_TC2_RA1             (0x40014054) /**< (TC2) Register A (channel = 0) 1 */
+#define REG_TC2_RB1             (0x40014058) /**< (TC2) Register B (channel = 0) 1 */
+#define REG_TC2_RC1             (0x4001405C) /**< (TC2) Register C (channel = 0) 1 */
+#define REG_TC2_SR1             (0x40014060) /**< (TC2) Status Register (channel = 0) 1 */
+#define REG_TC2_IER1            (0x40014064) /**< (TC2) Interrupt Enable Register (channel = 0) 1 */
+#define REG_TC2_IDR1            (0x40014068) /**< (TC2) Interrupt Disable Register (channel = 0) 1 */
+#define REG_TC2_IMR1            (0x4001406C) /**< (TC2) Interrupt Mask Register (channel = 0) 1 */
+#define REG_TC2_EMR1            (0x40014070) /**< (TC2) Extended Mode Register (channel = 0) 1 */
+#define REG_TC2_CCR2            (0x40014080) /**< (TC2) Channel Control Register (channel = 0) 2 */
+#define REG_TC2_CMR2            (0x40014084) /**< (TC2) Channel Mode Register (channel = 0) 2 */
+#define REG_TC2_SMMR2           (0x40014088) /**< (TC2) Stepper Motor Mode Register (channel = 0) 2 */
+#define REG_TC2_RAB2            (0x4001408C) /**< (TC2) Register AB (channel = 0) 2 */
+#define REG_TC2_CV2             (0x40014090) /**< (TC2) Counter Value (channel = 0) 2 */
+#define REG_TC2_RA2             (0x40014094) /**< (TC2) Register A (channel = 0) 2 */
+#define REG_TC2_RB2             (0x40014098) /**< (TC2) Register B (channel = 0) 2 */
+#define REG_TC2_RC2             (0x4001409C) /**< (TC2) Register C (channel = 0) 2 */
+#define REG_TC2_SR2             (0x400140A0) /**< (TC2) Status Register (channel = 0) 2 */
+#define REG_TC2_IER2            (0x400140A4) /**< (TC2) Interrupt Enable Register (channel = 0) 2 */
+#define REG_TC2_IDR2            (0x400140A8) /**< (TC2) Interrupt Disable Register (channel = 0) 2 */
+#define REG_TC2_IMR2            (0x400140AC) /**< (TC2) Interrupt Mask Register (channel = 0) 2 */
+#define REG_TC2_EMR2            (0x400140B0) /**< (TC2) Extended Mode Register (channel = 0) 2 */
+#define REG_TC2_BCR             (0x400140C0) /**< (TC2) Block Control Register */
+#define REG_TC2_BMR             (0x400140C4) /**< (TC2) Block Mode Register */
+#define REG_TC2_QIER            (0x400140C8) /**< (TC2) QDEC Interrupt Enable Register */
+#define REG_TC2_QIDR            (0x400140CC) /**< (TC2) QDEC Interrupt Disable Register */
+#define REG_TC2_QIMR            (0x400140D0) /**< (TC2) QDEC Interrupt Mask Register */
+#define REG_TC2_QISR            (0x400140D4) /**< (TC2) QDEC Interrupt Status Register */
+#define REG_TC2_FMR             (0x400140D8) /**< (TC2) Fault Mode Register */
+#define REG_TC2_WPMR            (0x400140E4) /**< (TC2) Write Protection Mode Register */
+
+#else
+
+#define REG_TC2_CCR0            (*(__O  uint32_t*)0x40014000U) /**< (TC2) Channel Control Register (channel = 0) 0 */
+#define REG_TC2_CMR0            (*(__IO uint32_t*)0x40014004U) /**< (TC2) Channel Mode Register (channel = 0) 0 */
+#define REG_TC2_SMMR0           (*(__IO uint32_t*)0x40014008U) /**< (TC2) Stepper Motor Mode Register (channel = 0) 0 */
+#define REG_TC2_RAB0            (*(__I  uint32_t*)0x4001400CU) /**< (TC2) Register AB (channel = 0) 0 */
+#define REG_TC2_CV0             (*(__I  uint32_t*)0x40014010U) /**< (TC2) Counter Value (channel = 0) 0 */
+#define REG_TC2_RA0             (*(__IO uint32_t*)0x40014014U) /**< (TC2) Register A (channel = 0) 0 */
+#define REG_TC2_RB0             (*(__IO uint32_t*)0x40014018U) /**< (TC2) Register B (channel = 0) 0 */
+#define REG_TC2_RC0             (*(__IO uint32_t*)0x4001401CU) /**< (TC2) Register C (channel = 0) 0 */
+#define REG_TC2_SR0             (*(__I  uint32_t*)0x40014020U) /**< (TC2) Status Register (channel = 0) 0 */
+#define REG_TC2_IER0            (*(__O  uint32_t*)0x40014024U) /**< (TC2) Interrupt Enable Register (channel = 0) 0 */
+#define REG_TC2_IDR0            (*(__O  uint32_t*)0x40014028U) /**< (TC2) Interrupt Disable Register (channel = 0) 0 */
+#define REG_TC2_IMR0            (*(__I  uint32_t*)0x4001402CU) /**< (TC2) Interrupt Mask Register (channel = 0) 0 */
+#define REG_TC2_EMR0            (*(__IO uint32_t*)0x40014030U) /**< (TC2) Extended Mode Register (channel = 0) 0 */
+#define REG_TC2_CCR1            (*(__O  uint32_t*)0x40014040U) /**< (TC2) Channel Control Register (channel = 0) 1 */
+#define REG_TC2_CMR1            (*(__IO uint32_t*)0x40014044U) /**< (TC2) Channel Mode Register (channel = 0) 1 */
+#define REG_TC2_SMMR1           (*(__IO uint32_t*)0x40014048U) /**< (TC2) Stepper Motor Mode Register (channel = 0) 1 */
+#define REG_TC2_RAB1            (*(__I  uint32_t*)0x4001404CU) /**< (TC2) Register AB (channel = 0) 1 */
+#define REG_TC2_CV1             (*(__I  uint32_t*)0x40014050U) /**< (TC2) Counter Value (channel = 0) 1 */
+#define REG_TC2_RA1             (*(__IO uint32_t*)0x40014054U) /**< (TC2) Register A (channel = 0) 1 */
+#define REG_TC2_RB1             (*(__IO uint32_t*)0x40014058U) /**< (TC2) Register B (channel = 0) 1 */
+#define REG_TC2_RC1             (*(__IO uint32_t*)0x4001405CU) /**< (TC2) Register C (channel = 0) 1 */
+#define REG_TC2_SR1             (*(__I  uint32_t*)0x40014060U) /**< (TC2) Status Register (channel = 0) 1 */
+#define REG_TC2_IER1            (*(__O  uint32_t*)0x40014064U) /**< (TC2) Interrupt Enable Register (channel = 0) 1 */
+#define REG_TC2_IDR1            (*(__O  uint32_t*)0x40014068U) /**< (TC2) Interrupt Disable Register (channel = 0) 1 */
+#define REG_TC2_IMR1            (*(__I  uint32_t*)0x4001406CU) /**< (TC2) Interrupt Mask Register (channel = 0) 1 */
+#define REG_TC2_EMR1            (*(__IO uint32_t*)0x40014070U) /**< (TC2) Extended Mode Register (channel = 0) 1 */
+#define REG_TC2_CCR2            (*(__O  uint32_t*)0x40014080U) /**< (TC2) Channel Control Register (channel = 0) 2 */
+#define REG_TC2_CMR2            (*(__IO uint32_t*)0x40014084U) /**< (TC2) Channel Mode Register (channel = 0) 2 */
+#define REG_TC2_SMMR2           (*(__IO uint32_t*)0x40014088U) /**< (TC2) Stepper Motor Mode Register (channel = 0) 2 */
+#define REG_TC2_RAB2            (*(__I  uint32_t*)0x4001408CU) /**< (TC2) Register AB (channel = 0) 2 */
+#define REG_TC2_CV2             (*(__I  uint32_t*)0x40014090U) /**< (TC2) Counter Value (channel = 0) 2 */
+#define REG_TC2_RA2             (*(__IO uint32_t*)0x40014094U) /**< (TC2) Register A (channel = 0) 2 */
+#define REG_TC2_RB2             (*(__IO uint32_t*)0x40014098U) /**< (TC2) Register B (channel = 0) 2 */
+#define REG_TC2_RC2             (*(__IO uint32_t*)0x4001409CU) /**< (TC2) Register C (channel = 0) 2 */
+#define REG_TC2_SR2             (*(__I  uint32_t*)0x400140A0U) /**< (TC2) Status Register (channel = 0) 2 */
+#define REG_TC2_IER2            (*(__O  uint32_t*)0x400140A4U) /**< (TC2) Interrupt Enable Register (channel = 0) 2 */
+#define REG_TC2_IDR2            (*(__O  uint32_t*)0x400140A8U) /**< (TC2) Interrupt Disable Register (channel = 0) 2 */
+#define REG_TC2_IMR2            (*(__I  uint32_t*)0x400140ACU) /**< (TC2) Interrupt Mask Register (channel = 0) 2 */
+#define REG_TC2_EMR2            (*(__IO uint32_t*)0x400140B0U) /**< (TC2) Extended Mode Register (channel = 0) 2 */
+#define REG_TC2_BCR             (*(__O  uint32_t*)0x400140C0U) /**< (TC2) Block Control Register */
+#define REG_TC2_BMR             (*(__IO uint32_t*)0x400140C4U) /**< (TC2) Block Mode Register */
+#define REG_TC2_QIER            (*(__O  uint32_t*)0x400140C8U) /**< (TC2) QDEC Interrupt Enable Register */
+#define REG_TC2_QIDR            (*(__O  uint32_t*)0x400140CCU) /**< (TC2) QDEC Interrupt Disable Register */
+#define REG_TC2_QIMR            (*(__I  uint32_t*)0x400140D0U) /**< (TC2) QDEC Interrupt Mask Register */
+#define REG_TC2_QISR            (*(__I  uint32_t*)0x400140D4U) /**< (TC2) QDEC Interrupt Status Register */
+#define REG_TC2_FMR             (*(__IO uint32_t*)0x400140D8U) /**< (TC2) Fault Mode Register */
+#define REG_TC2_WPMR            (*(__IO uint32_t*)0x400140E4U) /**< (TC2) Write Protection Mode Register */
+
+#endif /* (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance Parameter definitions for TC2 peripheral ========== */
+#define TC2_DMAC_ID_RX                           42         
+#define TC2_INSTANCE_ID_CHANNEL0                 47         
+#define TC2_INSTANCE_ID_CHANNEL1                 48         
+#define TC2_INSTANCE_ID_CHANNEL2                 49         
+#define TC2_CLOCK_ID_CHANNEL0                    47         
+#define TC2_CLOCK_ID_CHANNEL1                    48         
+#define TC2_CLOCK_ID_CHANNEL2                    49         
+#define TC2_TCCLKS_                              0          /* MCK */
+#define TC2_TCCLKS_TIMER_CLOCK1                  1          /* PCK6 */
+#define TC2_TCCLKS_TIMER_CLOCK2                  2          /* MCK/8 */
+#define TC2_TCCLKS_TIMER_CLOCK3                  3          /* MCK/32 */
+#define TC2_TCCLKS_TIMER_CLOCK4                  4          /* MCK/128 */
+#define TC2_TCCLKS_TIMER_CLOCK5                  5          /* SLCK */
+#define TC2_TCCLKS_XC0                           6          /* XC0 */
+#define TC2_TCCLKS_XC1                           7          /* XC1 */
+#define TC2_TCCLKS_XC2                           8          /* XC2 */
+#define TC2_NUM_INTERRUPT_LINES                  3          
+#define TC2_TIMER_WIDTH                          16         
+
+#endif /* _SAME70_TC2_INSTANCE_ */