lib: Add Atmel SAMD21 cmsis headers

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 129 insertions, 0 deletions

diff --git a/lib/samd21/samd21a/include/instance/sercom0.h b/lib/samd21/samd21a/include/instance/sercom0.h
new file mode 100644
index 00000000..dfa5b4dd
--- /dev/null
+++ b/lib/samd21/samd21a/include/instance/sercom0.h
@@ -0,0 +1,129 @@
+/**

+ * \file

+ *

+ * \brief Instance description for SERCOM0

+ *

+ * Copyright (c) 2018 Microchip Technology Inc.

+ *

+ * \asf_license_start

+ *

+ * \page License

+ *

+ * SPDX-License-Identifier: Apache-2.0

+ *

+ * Licensed under the Apache License, Version 2.0 (the "License"); you may

+ * not use this file except in compliance with the License.

+ * You may obtain a copy of the Licence at

+ * 

+ * http://www.apache.org/licenses/LICENSE-2.0

+ * 

+ * Unless required by applicable law or agreed to in writing, software

+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT

+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+ * See the License for the specific language governing permissions and

+ * limitations under the License.

+ *

+ * \asf_license_stop

+ *

+ */

+

+#ifndef _SAMD21_SERCOM0_INSTANCE_

+#define _SAMD21_SERCOM0_INSTANCE_

+

+/* ========== Register definition for SERCOM0 peripheral ========== */

+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))

+#define REG_SERCOM0_I2CM_CTRLA     (0x42000800) /**< \brief (SERCOM0) I2CM Control A */

+#define REG_SERCOM0_I2CM_CTRLB     (0x42000804) /**< \brief (SERCOM0) I2CM Control B */

+#define REG_SERCOM0_I2CM_BAUD      (0x4200080C) /**< \brief (SERCOM0) I2CM Baud Rate */

+#define REG_SERCOM0_I2CM_INTENCLR  (0x42000814) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */

+#define REG_SERCOM0_I2CM_INTENSET  (0x42000816) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */

+#define REG_SERCOM0_I2CM_INTFLAG   (0x42000818) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */

+#define REG_SERCOM0_I2CM_STATUS    (0x4200081A) /**< \brief (SERCOM0) I2CM Status */

+#define REG_SERCOM0_I2CM_SYNCBUSY  (0x4200081C) /**< \brief (SERCOM0) I2CM Syncbusy */

+#define REG_SERCOM0_I2CM_ADDR      (0x42000824) /**< \brief (SERCOM0) I2CM Address */

+#define REG_SERCOM0_I2CM_DATA      (0x42000828) /**< \brief (SERCOM0) I2CM Data */

+#define REG_SERCOM0_I2CM_DBGCTRL   (0x42000830) /**< \brief (SERCOM0) I2CM Debug Control */

+#define REG_SERCOM0_I2CS_CTRLA     (0x42000800) /**< \brief (SERCOM0) I2CS Control A */

+#define REG_SERCOM0_I2CS_CTRLB     (0x42000804) /**< \brief (SERCOM0) I2CS Control B */

+#define REG_SERCOM0_I2CS_INTENCLR  (0x42000814) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */

+#define REG_SERCOM0_I2CS_INTENSET  (0x42000816) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */

+#define REG_SERCOM0_I2CS_INTFLAG   (0x42000818) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */

+#define REG_SERCOM0_I2CS_STATUS    (0x4200081A) /**< \brief (SERCOM0) I2CS Status */

+#define REG_SERCOM0_I2CS_SYNCBUSY  (0x4200081C) /**< \brief (SERCOM0) I2CS Syncbusy */

+#define REG_SERCOM0_I2CS_ADDR      (0x42000824) /**< \brief (SERCOM0) I2CS Address */

+#define REG_SERCOM0_I2CS_DATA      (0x42000828) /**< \brief (SERCOM0) I2CS Data */

+#define REG_SERCOM0_SPI_CTRLA      (0x42000800) /**< \brief (SERCOM0) SPI Control A */

+#define REG_SERCOM0_SPI_CTRLB      (0x42000804) /**< \brief (SERCOM0) SPI Control B */

+#define REG_SERCOM0_SPI_BAUD       (0x4200080C) /**< \brief (SERCOM0) SPI Baud Rate */

+#define REG_SERCOM0_SPI_INTENCLR   (0x42000814) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */

+#define REG_SERCOM0_SPI_INTENSET   (0x42000816) /**< \brief (SERCOM0) SPI Interrupt Enable Set */

+#define REG_SERCOM0_SPI_INTFLAG    (0x42000818) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */

+#define REG_SERCOM0_SPI_STATUS     (0x4200081A) /**< \brief (SERCOM0) SPI Status */

+#define REG_SERCOM0_SPI_SYNCBUSY   (0x4200081C) /**< \brief (SERCOM0) SPI Syncbusy */

+#define REG_SERCOM0_SPI_ADDR       (0x42000824) /**< \brief (SERCOM0) SPI Address */

+#define REG_SERCOM0_SPI_DATA       (0x42000828) /**< \brief (SERCOM0) SPI Data */

+#define REG_SERCOM0_SPI_DBGCTRL    (0x42000830) /**< \brief (SERCOM0) SPI Debug Control */

+#define REG_SERCOM0_USART_CTRLA    (0x42000800) /**< \brief (SERCOM0) USART Control A */

+#define REG_SERCOM0_USART_CTRLB    (0x42000804) /**< \brief (SERCOM0) USART Control B */

+#define REG_SERCOM0_USART_BAUD     (0x4200080C) /**< \brief (SERCOM0) USART Baud Rate */

+#define REG_SERCOM0_USART_RXPL     (0x4200080E) /**< \brief (SERCOM0) USART Receive Pulse Length */

+#define REG_SERCOM0_USART_INTENCLR (0x42000814) /**< \brief (SERCOM0) USART Interrupt Enable Clear */

+#define REG_SERCOM0_USART_INTENSET (0x42000816) /**< \brief (SERCOM0) USART Interrupt Enable Set */

+#define REG_SERCOM0_USART_INTFLAG  (0x42000818) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */

+#define REG_SERCOM0_USART_STATUS   (0x4200081A) /**< \brief (SERCOM0) USART Status */

+#define REG_SERCOM0_USART_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) USART Syncbusy */

+#define REG_SERCOM0_USART_DATA     (0x42000828) /**< \brief (SERCOM0) USART Data */

+#define REG_SERCOM0_USART_DBGCTRL  (0x42000830) /**< \brief (SERCOM0) USART Debug Control */

+#else

+#define REG_SERCOM0_I2CM_CTRLA     (*(RwReg  *)0x42000800UL) /**< \brief (SERCOM0) I2CM Control A */

+#define REG_SERCOM0_I2CM_CTRLB     (*(RwReg  *)0x42000804UL) /**< \brief (SERCOM0) I2CM Control B */

+#define REG_SERCOM0_I2CM_BAUD      (*(RwReg  *)0x4200080CUL) /**< \brief (SERCOM0) I2CM Baud Rate */

+#define REG_SERCOM0_I2CM_INTENCLR  (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */

+#define REG_SERCOM0_I2CM_INTENSET  (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */

+#define REG_SERCOM0_I2CM_INTFLAG   (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */

+#define REG_SERCOM0_I2CM_STATUS    (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CM Status */

+#define REG_SERCOM0_I2CM_SYNCBUSY  (*(RoReg  *)0x4200081CUL) /**< \brief (SERCOM0) I2CM Syncbusy */

+#define REG_SERCOM0_I2CM_ADDR      (*(RwReg  *)0x42000824UL) /**< \brief (SERCOM0) I2CM Address */

+#define REG_SERCOM0_I2CM_DATA      (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CM Data */

+#define REG_SERCOM0_I2CM_DBGCTRL   (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) I2CM Debug Control */

+#define REG_SERCOM0_I2CS_CTRLA     (*(RwReg  *)0x42000800UL) /**< \brief (SERCOM0) I2CS Control A */

+#define REG_SERCOM0_I2CS_CTRLB     (*(RwReg  *)0x42000804UL) /**< \brief (SERCOM0) I2CS Control B */

+#define REG_SERCOM0_I2CS_INTENCLR  (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */

+#define REG_SERCOM0_I2CS_INTENSET  (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */

+#define REG_SERCOM0_I2CS_INTFLAG   (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */

+#define REG_SERCOM0_I2CS_STATUS    (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CS Status */

+#define REG_SERCOM0_I2CS_SYNCBUSY  (*(RoReg  *)0x4200081CUL) /**< \brief (SERCOM0) I2CS Syncbusy */

+#define REG_SERCOM0_I2CS_ADDR      (*(RwReg  *)0x42000824UL) /**< \brief (SERCOM0) I2CS Address */

+#define REG_SERCOM0_I2CS_DATA      (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CS Data */

+#define REG_SERCOM0_SPI_CTRLA      (*(RwReg  *)0x42000800UL) /**< \brief (SERCOM0) SPI Control A */

+#define REG_SERCOM0_SPI_CTRLB      (*(RwReg  *)0x42000804UL) /**< \brief (SERCOM0) SPI Control B */

+#define REG_SERCOM0_SPI_BAUD       (*(RwReg8 *)0x4200080CUL) /**< \brief (SERCOM0) SPI Baud Rate */

+#define REG_SERCOM0_SPI_INTENCLR   (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */

+#define REG_SERCOM0_SPI_INTENSET   (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) SPI Interrupt Enable Set */

+#define REG_SERCOM0_SPI_INTFLAG    (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */

+#define REG_SERCOM0_SPI_STATUS     (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) SPI Status */

+#define REG_SERCOM0_SPI_SYNCBUSY   (*(RoReg  *)0x4200081CUL) /**< \brief (SERCOM0) SPI Syncbusy */

+#define REG_SERCOM0_SPI_ADDR       (*(RwReg  *)0x42000824UL) /**< \brief (SERCOM0) SPI Address */

+#define REG_SERCOM0_SPI_DATA       (*(RwReg  *)0x42000828UL) /**< \brief (SERCOM0) SPI Data */

+#define REG_SERCOM0_SPI_DBGCTRL    (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) SPI Debug Control */

+#define REG_SERCOM0_USART_CTRLA    (*(RwReg  *)0x42000800UL) /**< \brief (SERCOM0) USART Control A */

+#define REG_SERCOM0_USART_CTRLB    (*(RwReg  *)0x42000804UL) /**< \brief (SERCOM0) USART Control B */

+#define REG_SERCOM0_USART_BAUD     (*(RwReg16*)0x4200080CUL) /**< \brief (SERCOM0) USART Baud Rate */

+#define REG_SERCOM0_USART_RXPL     (*(RwReg8 *)0x4200080EUL) /**< \brief (SERCOM0) USART Receive Pulse Length */

+#define REG_SERCOM0_USART_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) USART Interrupt Enable Clear */

+#define REG_SERCOM0_USART_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) USART Interrupt Enable Set */

+#define REG_SERCOM0_USART_INTFLAG  (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */

+#define REG_SERCOM0_USART_STATUS   (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) USART Status */

+#define REG_SERCOM0_USART_SYNCBUSY (*(RoReg  *)0x4200081CUL) /**< \brief (SERCOM0) USART Syncbusy */

+#define REG_SERCOM0_USART_DATA     (*(RwReg16*)0x42000828UL) /**< \brief (SERCOM0) USART Data */

+#define REG_SERCOM0_USART_DBGCTRL  (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) USART Debug Control */

+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

+

+/* ========== Instance parameters for SERCOM0 peripheral ========== */

+#define SERCOM0_DMAC_ID_RX          1        // Index of DMA RX trigger

+#define SERCOM0_DMAC_ID_TX          2        // Index of DMA TX trigger

+#define SERCOM0_GCLK_ID_CORE        20       // Index of Generic Clock for Core

+#define SERCOM0_GCLK_ID_SLOW        19       // Index of Generic Clock for SMbus timeout

+#define SERCOM0_INT_MSB             6       

+

+#endif /* _SAMD21_SERCOM0_INSTANCE_ */