lib: Add Atmel SAM3X CMSIS files

Add most recent SAM3X CMSIS files from Atmel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 120 insertions, 0 deletions

diff --git a/lib/sam3x/include/instance/tc2.h b/lib/sam3x/include/instance/tc2.h
new file mode 100644
index 00000000..fc2e79a5
--- /dev/null
+++ b/lib/sam3x/include/instance/tc2.h
@@ -0,0 +1,120 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM3XA_TC2_INSTANCE_
+#define _SAM3XA_TC2_INSTANCE_
+
+/* ========== Register definition for TC2 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+  #define REG_TC2_CCR0                   (0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */
+  #define REG_TC2_CMR0                   (0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */
+  #define REG_TC2_SMMR0                  (0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */
+  #define REG_TC2_CV0                    (0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */
+  #define REG_TC2_RA0                    (0x40088014U) /**< \brief (TC2) Register A (channel = 0) */
+  #define REG_TC2_RB0                    (0x40088018U) /**< \brief (TC2) Register B (channel = 0) */
+  #define REG_TC2_RC0                    (0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */
+  #define REG_TC2_SR0                    (0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */
+  #define REG_TC2_IER0                   (0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */
+  #define REG_TC2_IDR0                   (0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */
+  #define REG_TC2_IMR0                   (0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */
+  #define REG_TC2_CCR1                   (0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */
+  #define REG_TC2_CMR1                   (0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */
+  #define REG_TC2_SMMR1                  (0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */
+  #define REG_TC2_CV1                    (0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */
+  #define REG_TC2_RA1                    (0x40088054U) /**< \brief (TC2) Register A (channel = 1) */
+  #define REG_TC2_RB1                    (0x40088058U) /**< \brief (TC2) Register B (channel = 1) */
+  #define REG_TC2_RC1                    (0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */
+  #define REG_TC2_SR1                    (0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */
+  #define REG_TC2_IER1                   (0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */
+  #define REG_TC2_IDR1                   (0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */
+  #define REG_TC2_IMR1                   (0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */
+  #define REG_TC2_CCR2                   (0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */
+  #define REG_TC2_CMR2                   (0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */
+  #define REG_TC2_SMMR2                  (0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */
+  #define REG_TC2_CV2                    (0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */
+  #define REG_TC2_RA2                    (0x40088094U) /**< \brief (TC2) Register A (channel = 2) */
+  #define REG_TC2_RB2                    (0x40088098U) /**< \brief (TC2) Register B (channel = 2) */
+  #define REG_TC2_RC2                    (0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */
+  #define REG_TC2_SR2                    (0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */
+  #define REG_TC2_IER2                   (0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */
+  #define REG_TC2_IDR2                   (0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */
+  #define REG_TC2_IMR2                   (0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */
+  #define REG_TC2_BCR                    (0x400880C0U) /**< \brief (TC2) Block Control Register */
+  #define REG_TC2_BMR                    (0x400880C4U) /**< \brief (TC2) Block Mode Register */
+  #define REG_TC2_QIER                   (0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */
+  #define REG_TC2_QIDR                   (0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */
+  #define REG_TC2_QIMR                   (0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */
+  #define REG_TC2_QISR                   (0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */
+  #define REG_TC2_FMR                    (0x400880D8U) /**< \brief (TC2) Fault Mode Register */
+  #define REG_TC2_WPMR                   (0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */
+#else
+  #define REG_TC2_CCR0  (*(__O  uint32_t*)0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */
+  #define REG_TC2_CMR0  (*(__IO uint32_t*)0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */
+  #define REG_TC2_SMMR0 (*(__IO uint32_t*)0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */
+  #define REG_TC2_CV0   (*(__I  uint32_t*)0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */
+  #define REG_TC2_RA0   (*(__IO uint32_t*)0x40088014U) /**< \brief (TC2) Register A (channel = 0) */
+  #define REG_TC2_RB0   (*(__IO uint32_t*)0x40088018U) /**< \brief (TC2) Register B (channel = 0) */
+  #define REG_TC2_RC0   (*(__IO uint32_t*)0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */
+  #define REG_TC2_SR0   (*(__I  uint32_t*)0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */
+  #define REG_TC2_IER0  (*(__O  uint32_t*)0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */
+  #define REG_TC2_IDR0  (*(__O  uint32_t*)0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */
+  #define REG_TC2_IMR0  (*(__I  uint32_t*)0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */
+  #define REG_TC2_CCR1  (*(__O  uint32_t*)0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */
+  #define REG_TC2_CMR1  (*(__IO uint32_t*)0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */
+  #define REG_TC2_SMMR1 (*(__IO uint32_t*)0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */
+  #define REG_TC2_CV1   (*(__I  uint32_t*)0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */
+  #define REG_TC2_RA1   (*(__IO uint32_t*)0x40088054U) /**< \brief (TC2) Register A (channel = 1) */
+  #define REG_TC2_RB1   (*(__IO uint32_t*)0x40088058U) /**< \brief (TC2) Register B (channel = 1) */
+  #define REG_TC2_RC1   (*(__IO uint32_t*)0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */
+  #define REG_TC2_SR1   (*(__I  uint32_t*)0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */
+  #define REG_TC2_IER1  (*(__O  uint32_t*)0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */
+  #define REG_TC2_IDR1  (*(__O  uint32_t*)0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */
+  #define REG_TC2_IMR1  (*(__I  uint32_t*)0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */
+  #define REG_TC2_CCR2  (*(__O  uint32_t*)0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */
+  #define REG_TC2_CMR2  (*(__IO uint32_t*)0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */
+  #define REG_TC2_SMMR2 (*(__IO uint32_t*)0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */
+  #define REG_TC2_CV2   (*(__I  uint32_t*)0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */
+  #define REG_TC2_RA2   (*(__IO uint32_t*)0x40088094U) /**< \brief (TC2) Register A (channel = 2) */
+  #define REG_TC2_RB2   (*(__IO uint32_t*)0x40088098U) /**< \brief (TC2) Register B (channel = 2) */
+  #define REG_TC2_RC2   (*(__IO uint32_t*)0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */
+  #define REG_TC2_SR2   (*(__I  uint32_t*)0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */
+  #define REG_TC2_IER2  (*(__O  uint32_t*)0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */
+  #define REG_TC2_IDR2  (*(__O  uint32_t*)0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */
+  #define REG_TC2_IMR2  (*(__I  uint32_t*)0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */
+  #define REG_TC2_BCR   (*(__O  uint32_t*)0x400880C0U) /**< \brief (TC2) Block Control Register */
+  #define REG_TC2_BMR   (*(__IO uint32_t*)0x400880C4U) /**< \brief (TC2) Block Mode Register */
+  #define REG_TC2_QIER  (*(__O  uint32_t*)0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */
+  #define REG_TC2_QIDR  (*(__O  uint32_t*)0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */
+  #define REG_TC2_QIMR  (*(__I  uint32_t*)0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */
+  #define REG_TC2_QISR  (*(__I  uint32_t*)0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */
+  #define REG_TC2_FMR   (*(__IO uint32_t*)0x400880D8U) /**< \brief (TC2) Fault Mode Register */
+  #define REG_TC2_WPMR  (*(__IO uint32_t*)0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3XA_TC2_INSTANCE_ */