lib: Add rp2040 build files

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 134 insertions, 0 deletions

diff --git a/lib/rp2040/hardware/structs/i2c.h b/lib/rp2040/hardware/structs/i2c.h
new file mode 100644
index 00000000..1a58c50d
--- /dev/null
+++ b/lib/rp2040/hardware/structs/i2c.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _HARDWARE_STRUCTS_I2C_H
+#define _HARDWARE_STRUCTS_I2C_H
+
+#include "hardware/address_mapped.h"
+#include "hardware/regs/i2c.h"
+
+typedef struct {
+    io_rw_32 con;
+    io_rw_32 tar;
+    io_rw_32 sar;
+    uint32_t _pad0;
+    io_rw_32 data_cmd;
+    io_rw_32 ss_scl_hcnt;
+    io_rw_32 ss_scl_lcnt;
+    io_rw_32 fs_scl_hcnt;
+    io_rw_32 fs_scl_lcnt;
+    uint32_t _pad1[2];
+    io_rw_32 intr_stat;
+    io_rw_32 intr_mask;
+    io_rw_32 raw_intr_stat;
+    io_rw_32 rx_tl;
+    io_rw_32 tx_tl;
+    io_rw_32 clr_intr;
+    io_rw_32 clr_rx_under;
+    io_rw_32 clr_rx_over;
+    io_rw_32 clr_tx_over;
+    io_rw_32 clr_rd_req;
+    io_rw_32 clr_tx_abrt;
+    io_rw_32 clr_rx_done;
+    io_rw_32 clr_activity;
+    io_rw_32 clr_stop_det;
+    io_rw_32 clr_start_det;
+    io_rw_32 clr_gen_call;
+    io_rw_32 enable;
+    io_rw_32 status;
+    io_rw_32 txflr;
+    io_rw_32 rxflr;
+    io_rw_32 sda_hold;
+    io_rw_32 tx_abrt_source;
+    io_rw_32 slv_data_nack_only;
+    io_rw_32 dma_cr;
+    io_rw_32 dma_tdlr;
+    io_rw_32 dma_rdlr;
+    io_rw_32 sda_setup;
+    io_rw_32 ack_general_call;
+    io_rw_32 enable_status;
+    io_rw_32 fs_spklen;
+    uint32_t _pad2;
+    io_rw_32 clr_restart_det;
+} i2c_hw_t;
+
+#define i2c0_hw ((i2c_hw_t *const)I2C0_BASE)
+#define i2c1_hw ((i2c_hw_t *const)I2C1_BASE)
+
+// List of configuration constants for the Synopsys I2C hardware (you may see
+// references to these in I2C register header; these are *fixed* values,
+// set at hardware design time):
+
+// IC_ULTRA_FAST_MODE ................ 0x0
+// IC_UFM_TBUF_CNT_DEFAULT ........... 0x8
+// IC_UFM_SCL_LOW_COUNT .............. 0x0008
+// IC_UFM_SCL_HIGH_COUNT ............. 0x0006
+// IC_TX_TL .......................... 0x0
+// IC_TX_CMD_BLOCK ................... 0x1
+// IC_HAS_DMA ........................ 0x1
+// IC_HAS_ASYNC_FIFO ................. 0x0
+// IC_SMBUS_ARP ...................... 0x0
+// IC_FIRST_DATA_BYTE_STATUS ......... 0x1
+// IC_INTR_IO ........................ 0x1
+// IC_MASTER_MODE .................... 0x1
+// IC_DEFAULT_ACK_GENERAL_CALL ....... 0x1
+// IC_INTR_POL ....................... 0x1
+// IC_OPTIONAL_SAR ................... 0x0
+// IC_DEFAULT_TAR_SLAVE_ADDR ......... 0x055
+// IC_DEFAULT_SLAVE_ADDR ............. 0x055
+// IC_DEFAULT_HS_SPKLEN .............. 0x1
+// IC_FS_SCL_HIGH_COUNT .............. 0x0006
+// IC_HS_SCL_LOW_COUNT ............... 0x0008
+// IC_DEVICE_ID_VALUE ................ 0x0
+// IC_10BITADDR_MASTER ............... 0x0
+// IC_CLK_FREQ_OPTIMIZATION .......... 0x0
+// IC_DEFAULT_FS_SPKLEN .............. 0x7
+// IC_ADD_ENCODED_PARAMS ............. 0x0
+// IC_DEFAULT_SDA_HOLD ............... 0x000001
+// IC_DEFAULT_SDA_SETUP .............. 0x64
+// IC_AVOID_RX_FIFO_FLUSH_ON_TX_ABRT . 0x0
+// IC_CLOCK_PERIOD ................... 100
+// IC_EMPTYFIFO_HOLD_MASTER_EN ....... 1
+// IC_RESTART_EN ..................... 0x1
+// IC_TX_CMD_BLOCK_DEFAULT ........... 0x0
+// IC_BUS_CLEAR_FEATURE .............. 0x0
+// IC_CAP_LOADING .................... 100
+// IC_FS_SCL_LOW_COUNT ............... 0x000d
+// APB_DATA_WIDTH .................... 32
+// IC_SDA_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff
+// IC_SLV_DATA_NACK_ONLY ............. 0x1
+// IC_10BITADDR_SLAVE ................ 0x0
+// IC_CLK_TYPE ....................... 0x0
+// IC_SMBUS_UDID_MSB ................. 0x0
+// IC_SMBUS_SUSPEND_ALERT ............ 0x0
+// IC_HS_SCL_HIGH_COUNT .............. 0x0006
+// IC_SLV_RESTART_DET_EN ............. 0x1
+// IC_SMBUS .......................... 0x0
+// IC_OPTIONAL_SAR_DEFAULT ........... 0x0
+// IC_PERSISTANT_SLV_ADDR_DEFAULT .... 0x0
+// IC_USE_COUNTS ..................... 0x0
+// IC_RX_BUFFER_DEPTH ................ 16
+// IC_SCL_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff
+// IC_RX_FULL_HLD_BUS_EN ............. 0x1
+// IC_SLAVE_DISABLE .................. 0x1
+// IC_RX_TL .......................... 0x0
+// IC_DEVICE_ID ...................... 0x0
+// IC_HC_COUNT_VALUES ................ 0x0
+// I2C_DYNAMIC_TAR_UPDATE ............ 0
+// IC_SMBUS_CLK_LOW_MEXT_DEFAULT ..... 0xffffffff
+// IC_SMBUS_CLK_LOW_SEXT_DEFAULT ..... 0xffffffff
+// IC_HS_MASTER_CODE ................. 0x1
+// IC_SMBUS_RST_IDLE_CNT_DEFAULT ..... 0xffff
+// IC_SMBUS_UDID_LSB_DEFAULT ......... 0xffffffff
+// IC_SS_SCL_HIGH_COUNT .............. 0x0028
+// IC_SS_SCL_LOW_COUNT ............... 0x002f
+// IC_MAX_SPEED_MODE ................. 0x2
+// IC_STAT_FOR_CLK_STRETCH ........... 0x0
+// IC_STOP_DET_IF_MASTER_ACTIVE ...... 0x0
+// IC_DEFAULT_UFM_SPKLEN ............. 0x1
+// IC_TX_BUFFER_DEPTH ................ 16
+
+#endif