lib: Add rp2350 files to pico-sdk

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 128 insertions, 0 deletions

diff --git a/lib/pico-sdk/rp2350/hardware/structs/usb_dpram.h b/lib/pico-sdk/rp2350/hardware/structs/usb_dpram.h
new file mode 100644
index 00000000..aaa4ec58
--- /dev/null
+++ b/lib/pico-sdk/rp2350/hardware/structs/usb_dpram.h
@@ -0,0 +1,128 @@
+/**
+ * Copyright (c) 2024 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _HARDWARE_STRUCTS_USB_DPRAM_H
+#define _HARDWARE_STRUCTS_USB_DPRAM_H
+
+#include "hardware/address_mapped.h"
+#include "hardware/regs/usb.h"
+
+// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_usb
+//
+// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
+// _REG_(x) will link to the corresponding register in hardware/regs/usb.h.
+//
+// Bit-field descriptions are of the form:
+// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
+
+
+// 0-15
+#define USB_NUM_ENDPOINTS 16
+
+// allow user to restrict number of endpoints available to save RAN
+#ifndef USB_MAX_ENDPOINTS
+#define USB_MAX_ENDPOINTS USB_NUM_ENDPOINTS
+#endif
+
+// 1-15
+#define USB_HOST_INTERRUPT_ENDPOINTS (USB_NUM_ENDPOINTS - 1)
+
+// Endpoint buffer control bits
+#define USB_BUF_CTRL_FULL      0x00008000u
+#define USB_BUF_CTRL_LAST      0x00004000u
+#define USB_BUF_CTRL_DATA0_PID 0x00000000u
+#define USB_BUF_CTRL_DATA1_PID 0x00002000u
+#define USB_BUF_CTRL_SEL       0x00001000u
+#define USB_BUF_CTRL_STALL     0x00000800u
+#define USB_BUF_CTRL_AVAIL     0x00000400u
+#define USB_BUF_CTRL_LEN_MASK  0x000003FFu
+#define USB_BUF_CTRL_LEN_LSB   0
+
+// ep_inout_ctrl bits
+#define EP_CTRL_ENABLE_BITS (1u << 31u)
+#define EP_CTRL_DOUBLE_BUFFERED_BITS (1u << 30)
+#define EP_CTRL_INTERRUPT_PER_BUFFER (1u << 29)
+#define EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER (1u << 28)
+#define EP_CTRL_INTERRUPT_ON_NAK (1u << 16)
+#define EP_CTRL_INTERRUPT_ON_STALL (1u << 17)
+#define EP_CTRL_BUFFER_TYPE_LSB 26u
+#define EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB 16u
+
+#define USB_DPRAM_SIZE 4096u
+
+// PICO_CONFIG: USB_DPRAM_MAX, Set amount of USB RAM used by USB system, min=0, max=4096, default=4096, group=hardware_usb
+// Allow user to claim some of the USB RAM for themselves
+#ifndef USB_DPRAM_MAX
+#define USB_DPRAM_MAX USB_DPRAM_SIZE
+#endif
+
+// Define maximum packet sizes
+#define USB_MAX_ISO_PACKET_SIZE 1023
+#define USB_MAX_PACKET_SIZE 64
+
+typedef struct {
+    // 4K of DPSRAM at beginning. Note this supports 8, 16, and 32 bit accesses
+    volatile uint8_t setup_packet[8]; // First 8 bytes are always for setup packets
+
+    // Starts at ep1
+    struct usb_device_dpram_ep_ctrl {
+        io_rw_32 in;
+        io_rw_32 out;
+    } ep_ctrl[USB_NUM_ENDPOINTS - 1];
+
+    // Starts at ep0
+    struct usb_device_dpram_ep_buf_ctrl {
+        io_rw_32 in;
+        io_rw_32 out;
+    } ep_buf_ctrl[USB_NUM_ENDPOINTS];
+
+    // EP0 buffers are fixed. Assumes single buffered mode for EP0
+    uint8_t ep0_buf_a[0x40];
+    uint8_t ep0_buf_b[0x40];
+
+    // Rest of DPRAM can be carved up as needed
+    uint8_t epx_data[USB_DPRAM_MAX - 0x180];
+} usb_device_dpram_t;
+
+static_assert(sizeof(usb_device_dpram_t) == USB_DPRAM_MAX, "");
+static_assert(offsetof(usb_device_dpram_t, epx_data) == 0x180, "");
+
+typedef struct {
+    // 4K of DPSRAM at beginning. Note this supports 8, 16, and 32 bit accesses
+    volatile uint8_t setup_packet[8]; // First 8 bytes are always for setup packets
+
+    // Interrupt endpoint control 1 -> 15
+    struct usb_host_dpram_ep_ctrl {
+        io_rw_32 ctrl;
+        io_rw_32 spare;
+    } int_ep_ctrl[USB_HOST_INTERRUPT_ENDPOINTS];
+
+    io_rw_32 epx_buf_ctrl;
+    io_rw_32 _spare0;
+
+    // Interrupt endpoint buffer control
+    struct usb_host_dpram_ep_buf_ctrl {
+        io_rw_32 ctrl;
+        io_rw_32 spare;
+    } int_ep_buffer_ctrl[USB_HOST_INTERRUPT_ENDPOINTS];
+
+    io_rw_32 epx_ctrl;
+
+    uint8_t _spare1[124];
+
+    // Should start at 0x180
+    uint8_t epx_data[USB_DPRAM_MAX - 0x180];
+} usb_host_dpram_t;
+
+static_assert(sizeof(usb_host_dpram_t) == USB_DPRAM_MAX, "");
+static_assert(offsetof(usb_host_dpram_t, epx_data) == 0x180, "");
+
+#define usb_dpram ((usb_device_dpram_t *)USBCTRL_DPRAM_BASE)
+#define usbh_dpram ((usb_host_dpram_t *)USBCTRL_DPRAM_BASE)
+
+static_assert( USB_HOST_INTERRUPT_ENDPOINTS == 15, "");
+
+#endif // _HARDWARE_STRUCTS_USB_DPRAM_H
\ No newline at end of file