lib: Add rp2350 files to pico-sdk

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 316 insertions, 0 deletions

diff --git a/lib/pico-sdk/rp2350/hardware/structs/io_qspi.h b/lib/pico-sdk/rp2350/hardware/structs/io_qspi.h
new file mode 100644
index 00000000..cec2bba6
--- /dev/null
+++ b/lib/pico-sdk/rp2350/hardware/structs/io_qspi.h
@@ -0,0 +1,316 @@
+// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
+
+/**
+ * Copyright (c) 2024 Raspberry Pi Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef _HARDWARE_STRUCTS_IO_QSPI_H
+#define _HARDWARE_STRUCTS_IO_QSPI_H
+
+/**
+ * \file rp2350/io_qspi.h
+ */
+
+#include "hardware/address_mapped.h"
+#include "hardware/regs/io_qspi.h"
+
+// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_io_qspi
+//
+// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
+// _REG_(x) will link to the corresponding register in hardware/regs/io_qspi.h.
+//
+// Bit-field descriptions are of the form:
+// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
+
+/**
+ * \brief QSPI pin function selectors on RP2350 (used as typedef \ref gpio_function1_t) 
+ */
+typedef enum gpio_function1_rp2350 {
+    GPIO_FUNC1_XIP = 0, ///< Select XIP as QSPI pin function
+    GPIO_FUNC1_UART = 2, ///< Select UART as QSPI pin function
+    GPIO_FUNC1_I2C = 3, ///< Select I2C as QSPI pin function
+    GPIO_FUNC1_SIO = 5, ///< Select SIO as QSPI pin function
+    GPIO_FUNC1_UART_AUX = 11, ///< Select UART_AUX as QSPI pin function
+    GPIO_FUNC1_NULL = 0x1f, ///< Select NULL as QSPI pin function
+} gpio_function1_t;
+
+typedef struct {
+    _REG_(IO_QSPI_GPIO_QSPI_SCLK_STATUS_OFFSET) // IO_QSPI_GPIO_QSPI_SCLK_STATUS
+    // 0x04000000 [26]    IRQTOPROC    (0) interrupt to processors, after override is applied
+    // 0x00020000 [17]    INFROMPAD    (0) input signal from pad, before filtering and override are applied
+    // 0x00002000 [13]    OETOPAD      (0) output enable to pad after register override is applied
+    // 0x00000200 [9]     OUTTOPAD     (0) output signal to pad after register override is applied
+    io_ro_32 status;
+ 
+    _REG_(IO_QSPI_GPIO_QSPI_SCLK_CTRL_OFFSET) // IO_QSPI_GPIO_QSPI_SCLK_CTRL
+    // 0x30000000 [29:28] IRQOVER      (0x0) 
+    // 0x00030000 [17:16] INOVER       (0x0) 
+    // 0x0000c000 [15:14] OEOVER       (0x0) 
+    // 0x00003000 [13:12] OUTOVER      (0x0) 
+    // 0x0000001f [4:0]   FUNCSEL      (0x1f) 0-31 -> selects pin function according to the gpio table +
+    io_rw_32 ctrl;
+} io_qspi_status_ctrl_hw_t;
+
+typedef struct {
+    _REG_(IO_QSPI_PROC0_INTE_OFFSET) // IO_QSPI_PROC0_INTE
+    // Interrupt Enable for proc0
+    // 0x80000000 [31]    GPIO_QSPI_SD3_EDGE_HIGH (0) 
+    // 0x40000000 [30]    GPIO_QSPI_SD3_EDGE_LOW (0) 
+    // 0x20000000 [29]    GPIO_QSPI_SD3_LEVEL_HIGH (0) 
+    // 0x10000000 [28]    GPIO_QSPI_SD3_LEVEL_LOW (0) 
+    // 0x08000000 [27]    GPIO_QSPI_SD2_EDGE_HIGH (0) 
+    // 0x04000000 [26]    GPIO_QSPI_SD2_EDGE_LOW (0) 
+    // 0x02000000 [25]    GPIO_QSPI_SD2_LEVEL_HIGH (0) 
+    // 0x01000000 [24]    GPIO_QSPI_SD2_LEVEL_LOW (0) 
+    // 0x00800000 [23]    GPIO_QSPI_SD1_EDGE_HIGH (0) 
+    // 0x00400000 [22]    GPIO_QSPI_SD1_EDGE_LOW (0) 
+    // 0x00200000 [21]    GPIO_QSPI_SD1_LEVEL_HIGH (0) 
+    // 0x00100000 [20]    GPIO_QSPI_SD1_LEVEL_LOW (0) 
+    // 0x00080000 [19]    GPIO_QSPI_SD0_EDGE_HIGH (0) 
+    // 0x00040000 [18]    GPIO_QSPI_SD0_EDGE_LOW (0) 
+    // 0x00020000 [17]    GPIO_QSPI_SD0_LEVEL_HIGH (0) 
+    // 0x00010000 [16]    GPIO_QSPI_SD0_LEVEL_LOW (0) 
+    // 0x00008000 [15]    GPIO_QSPI_SS_EDGE_HIGH (0) 
+    // 0x00004000 [14]    GPIO_QSPI_SS_EDGE_LOW (0) 
+    // 0x00002000 [13]    GPIO_QSPI_SS_LEVEL_HIGH (0) 
+    // 0x00001000 [12]    GPIO_QSPI_SS_LEVEL_LOW (0) 
+    // 0x00000800 [11]    GPIO_QSPI_SCLK_EDGE_HIGH (0) 
+    // 0x00000400 [10]    GPIO_QSPI_SCLK_EDGE_LOW (0) 
+    // 0x00000200 [9]     GPIO_QSPI_SCLK_LEVEL_HIGH (0) 
+    // 0x00000100 [8]     GPIO_QSPI_SCLK_LEVEL_LOW (0) 
+    // 0x00000080 [7]     USBPHY_DM_EDGE_HIGH (0) 
+    // 0x00000040 [6]     USBPHY_DM_EDGE_LOW (0) 
+    // 0x00000020 [5]     USBPHY_DM_LEVEL_HIGH (0) 
+    // 0x00000010 [4]     USBPHY_DM_LEVEL_LOW (0) 
+    // 0x00000008 [3]     USBPHY_DP_EDGE_HIGH (0) 
+    // 0x00000004 [2]     USBPHY_DP_EDGE_LOW (0) 
+    // 0x00000002 [1]     USBPHY_DP_LEVEL_HIGH (0) 
+    // 0x00000001 [0]     USBPHY_DP_LEVEL_LOW (0) 
+    io_rw_32 inte;
+ 
+    _REG_(IO_QSPI_PROC0_INTF_OFFSET) // IO_QSPI_PROC0_INTF
+    // Interrupt Force for proc0
+    // 0x80000000 [31]    GPIO_QSPI_SD3_EDGE_HIGH (0) 
+    // 0x40000000 [30]    GPIO_QSPI_SD3_EDGE_LOW (0) 
+    // 0x20000000 [29]    GPIO_QSPI_SD3_LEVEL_HIGH (0) 
+    // 0x10000000 [28]    GPIO_QSPI_SD3_LEVEL_LOW (0) 
+    // 0x08000000 [27]    GPIO_QSPI_SD2_EDGE_HIGH (0) 
+    // 0x04000000 [26]    GPIO_QSPI_SD2_EDGE_LOW (0) 
+    // 0x02000000 [25]    GPIO_QSPI_SD2_LEVEL_HIGH (0) 
+    // 0x01000000 [24]    GPIO_QSPI_SD2_LEVEL_LOW (0) 
+    // 0x00800000 [23]    GPIO_QSPI_SD1_EDGE_HIGH (0) 
+    // 0x00400000 [22]    GPIO_QSPI_SD1_EDGE_LOW (0) 
+    // 0x00200000 [21]    GPIO_QSPI_SD1_LEVEL_HIGH (0) 
+    // 0x00100000 [20]    GPIO_QSPI_SD1_LEVEL_LOW (0) 
+    // 0x00080000 [19]    GPIO_QSPI_SD0_EDGE_HIGH (0) 
+    // 0x00040000 [18]    GPIO_QSPI_SD0_EDGE_LOW (0) 
+    // 0x00020000 [17]    GPIO_QSPI_SD0_LEVEL_HIGH (0) 
+    // 0x00010000 [16]    GPIO_QSPI_SD0_LEVEL_LOW (0) 
+    // 0x00008000 [15]    GPIO_QSPI_SS_EDGE_HIGH (0) 
+    // 0x00004000 [14]    GPIO_QSPI_SS_EDGE_LOW (0) 
+    // 0x00002000 [13]    GPIO_QSPI_SS_LEVEL_HIGH (0) 
+    // 0x00001000 [12]    GPIO_QSPI_SS_LEVEL_LOW (0) 
+    // 0x00000800 [11]    GPIO_QSPI_SCLK_EDGE_HIGH (0) 
+    // 0x00000400 [10]    GPIO_QSPI_SCLK_EDGE_LOW (0) 
+    // 0x00000200 [9]     GPIO_QSPI_SCLK_LEVEL_HIGH (0) 
+    // 0x00000100 [8]     GPIO_QSPI_SCLK_LEVEL_LOW (0) 
+    // 0x00000080 [7]     USBPHY_DM_EDGE_HIGH (0) 
+    // 0x00000040 [6]     USBPHY_DM_EDGE_LOW (0) 
+    // 0x00000020 [5]     USBPHY_DM_LEVEL_HIGH (0) 
+    // 0x00000010 [4]     USBPHY_DM_LEVEL_LOW (0) 
+    // 0x00000008 [3]     USBPHY_DP_EDGE_HIGH (0) 
+    // 0x00000004 [2]     USBPHY_DP_EDGE_LOW (0) 
+    // 0x00000002 [1]     USBPHY_DP_LEVEL_HIGH (0) 
+    // 0x00000001 [0]     USBPHY_DP_LEVEL_LOW (0) 
+    io_rw_32 intf;
+ 
+    _REG_(IO_QSPI_PROC0_INTS_OFFSET) // IO_QSPI_PROC0_INTS
+    // Interrupt status after masking & forcing for proc0
+    // 0x80000000 [31]    GPIO_QSPI_SD3_EDGE_HIGH (0) 
+    // 0x40000000 [30]    GPIO_QSPI_SD3_EDGE_LOW (0) 
+    // 0x20000000 [29]    GPIO_QSPI_SD3_LEVEL_HIGH (0) 
+    // 0x10000000 [28]    GPIO_QSPI_SD3_LEVEL_LOW (0) 
+    // 0x08000000 [27]    GPIO_QSPI_SD2_EDGE_HIGH (0) 
+    // 0x04000000 [26]    GPIO_QSPI_SD2_EDGE_LOW (0) 
+    // 0x02000000 [25]    GPIO_QSPI_SD2_LEVEL_HIGH (0) 
+    // 0x01000000 [24]    GPIO_QSPI_SD2_LEVEL_LOW (0) 
+    // 0x00800000 [23]    GPIO_QSPI_SD1_EDGE_HIGH (0) 
+    // 0x00400000 [22]    GPIO_QSPI_SD1_EDGE_LOW (0) 
+    // 0x00200000 [21]    GPIO_QSPI_SD1_LEVEL_HIGH (0) 
+    // 0x00100000 [20]    GPIO_QSPI_SD1_LEVEL_LOW (0) 
+    // 0x00080000 [19]    GPIO_QSPI_SD0_EDGE_HIGH (0) 
+    // 0x00040000 [18]    GPIO_QSPI_SD0_EDGE_LOW (0) 
+    // 0x00020000 [17]    GPIO_QSPI_SD0_LEVEL_HIGH (0) 
+    // 0x00010000 [16]    GPIO_QSPI_SD0_LEVEL_LOW (0) 
+    // 0x00008000 [15]    GPIO_QSPI_SS_EDGE_HIGH (0) 
+    // 0x00004000 [14]    GPIO_QSPI_SS_EDGE_LOW (0) 
+    // 0x00002000 [13]    GPIO_QSPI_SS_LEVEL_HIGH (0) 
+    // 0x00001000 [12]    GPIO_QSPI_SS_LEVEL_LOW (0) 
+    // 0x00000800 [11]    GPIO_QSPI_SCLK_EDGE_HIGH (0) 
+    // 0x00000400 [10]    GPIO_QSPI_SCLK_EDGE_LOW (0) 
+    // 0x00000200 [9]     GPIO_QSPI_SCLK_LEVEL_HIGH (0) 
+    // 0x00000100 [8]     GPIO_QSPI_SCLK_LEVEL_LOW (0) 
+    // 0x00000080 [7]     USBPHY_DM_EDGE_HIGH (0) 
+    // 0x00000040 [6]     USBPHY_DM_EDGE_LOW (0) 
+    // 0x00000020 [5]     USBPHY_DM_LEVEL_HIGH (0) 
+    // 0x00000010 [4]     USBPHY_DM_LEVEL_LOW (0) 
+    // 0x00000008 [3]     USBPHY_DP_EDGE_HIGH (0) 
+    // 0x00000004 [2]     USBPHY_DP_EDGE_LOW (0) 
+    // 0x00000002 [1]     USBPHY_DP_LEVEL_HIGH (0) 
+    // 0x00000001 [0]     USBPHY_DP_LEVEL_LOW (0) 
+    io_ro_32 ints;
+} io_qspi_irq_ctrl_hw_t;
+
+typedef struct {
+    _REG_(IO_QSPI_USBPHY_DP_STATUS_OFFSET) // IO_QSPI_USBPHY_DP_STATUS
+    // 0x04000000 [26]    IRQTOPROC    (0) interrupt to processors, after override is applied
+    // 0x00020000 [17]    INFROMPAD    (0) input signal from pad, before filtering and override are applied
+    // 0x00002000 [13]    OETOPAD      (0) output enable to pad after register override is applied
+    // 0x00000200 [9]     OUTTOPAD     (0) output signal to pad after register override is applied
+    io_ro_32 usbphy_dp_status;
+ 
+    _REG_(IO_QSPI_USBPHY_DP_CTRL_OFFSET) // IO_QSPI_USBPHY_DP_CTRL
+    // 0x30000000 [29:28] IRQOVER      (0x0) 
+    // 0x00030000 [17:16] INOVER       (0x0) 
+    // 0x0000c000 [15:14] OEOVER       (0x0) 
+    // 0x00003000 [13:12] OUTOVER      (0x0) 
+    // 0x0000001f [4:0]   FUNCSEL      (0x1f) 0-31 -> selects pin function according to the gpio table +
+    io_rw_32 usbphy_dp_ctrl;
+ 
+    _REG_(IO_QSPI_USBPHY_DM_STATUS_OFFSET) // IO_QSPI_USBPHY_DM_STATUS
+    // 0x04000000 [26]    IRQTOPROC    (0) interrupt to processors, after override is applied
+    // 0x00020000 [17]    INFROMPAD    (0) input signal from pad, before filtering and override are applied
+    // 0x00002000 [13]    OETOPAD      (0) output enable to pad after register override is applied
+    // 0x00000200 [9]     OUTTOPAD     (0) output signal to pad after register override is applied
+    io_ro_32 usbphy_dm_status;
+ 
+    _REG_(IO_QSPI_USBPHY_DM_CTRL_OFFSET) // IO_QSPI_USBPHY_DM_CTRL
+    // 0x30000000 [29:28] IRQOVER      (0x0) 
+    // 0x00030000 [17:16] INOVER       (0x0) 
+    // 0x0000c000 [15:14] OEOVER       (0x0) 
+    // 0x00003000 [13:12] OUTOVER      (0x0) 
+    // 0x0000001f [4:0]   FUNCSEL      (0x1f) 0-31 -> selects pin function according to the gpio table +
+    io_rw_32 usbphy_dm_ctrl;
+ 
+    io_qspi_status_ctrl_hw_t io[6];
+ 
+    uint32_t _pad0[112];
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_PROC0_SECURE_OFFSET) // IO_QSPI_IRQSUMMARY_PROC0_SECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_proc0_secure;
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_PROC0_NONSECURE_OFFSET) // IO_QSPI_IRQSUMMARY_PROC0_NONSECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_proc0_nonsecure;
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_PROC1_SECURE_OFFSET) // IO_QSPI_IRQSUMMARY_PROC1_SECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_proc1_secure;
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_PROC1_NONSECURE_OFFSET) // IO_QSPI_IRQSUMMARY_PROC1_NONSECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_proc1_nonsecure;
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE_OFFSET) // IO_QSPI_IRQSUMMARY_DORMANT_WAKE_SECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_dormant_wake_secure;
+ 
+    _REG_(IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE_OFFSET) // IO_QSPI_IRQSUMMARY_DORMANT_WAKE_NONSECURE
+    // 0x00000080 [7]     GPIO_QSPI_SD3 (0) 
+    // 0x00000040 [6]     GPIO_QSPI_SD2 (0) 
+    // 0x00000020 [5]     GPIO_QSPI_SD1 (0) 
+    // 0x00000010 [4]     GPIO_QSPI_SD0 (0) 
+    // 0x00000008 [3]     GPIO_QSPI_SS (0) 
+    // 0x00000004 [2]     GPIO_QSPI_SCLK (0) 
+    // 0x00000002 [1]     USBPHY_DM    (0) 
+    // 0x00000001 [0]     USBPHY_DP    (0) 
+    io_ro_32 irqsummary_dormant_wake_nonsecure;
+ 
+    _REG_(IO_QSPI_INTR_OFFSET) // IO_QSPI_INTR
+    // Raw Interrupts
+    // 0x80000000 [31]    GPIO_QSPI_SD3_EDGE_HIGH (0) 
+    // 0x40000000 [30]    GPIO_QSPI_SD3_EDGE_LOW (0) 
+    // 0x20000000 [29]    GPIO_QSPI_SD3_LEVEL_HIGH (0) 
+    // 0x10000000 [28]    GPIO_QSPI_SD3_LEVEL_LOW (0) 
+    // 0x08000000 [27]    GPIO_QSPI_SD2_EDGE_HIGH (0) 
+    // 0x04000000 [26]    GPIO_QSPI_SD2_EDGE_LOW (0) 
+    // 0x02000000 [25]    GPIO_QSPI_SD2_LEVEL_HIGH (0) 
+    // 0x01000000 [24]    GPIO_QSPI_SD2_LEVEL_LOW (0) 
+    // 0x00800000 [23]    GPIO_QSPI_SD1_EDGE_HIGH (0) 
+    // 0x00400000 [22]    GPIO_QSPI_SD1_EDGE_LOW (0) 
+    // 0x00200000 [21]    GPIO_QSPI_SD1_LEVEL_HIGH (0) 
+    // 0x00100000 [20]    GPIO_QSPI_SD1_LEVEL_LOW (0) 
+    // 0x00080000 [19]    GPIO_QSPI_SD0_EDGE_HIGH (0) 
+    // 0x00040000 [18]    GPIO_QSPI_SD0_EDGE_LOW (0) 
+    // 0x00020000 [17]    GPIO_QSPI_SD0_LEVEL_HIGH (0) 
+    // 0x00010000 [16]    GPIO_QSPI_SD0_LEVEL_LOW (0) 
+    // 0x00008000 [15]    GPIO_QSPI_SS_EDGE_HIGH (0) 
+    // 0x00004000 [14]    GPIO_QSPI_SS_EDGE_LOW (0) 
+    // 0x00002000 [13]    GPIO_QSPI_SS_LEVEL_HIGH (0) 
+    // 0x00001000 [12]    GPIO_QSPI_SS_LEVEL_LOW (0) 
+    // 0x00000800 [11]    GPIO_QSPI_SCLK_EDGE_HIGH (0) 
+    // 0x00000400 [10]    GPIO_QSPI_SCLK_EDGE_LOW (0) 
+    // 0x00000200 [9]     GPIO_QSPI_SCLK_LEVEL_HIGH (0) 
+    // 0x00000100 [8]     GPIO_QSPI_SCLK_LEVEL_LOW (0) 
+    // 0x00000080 [7]     USBPHY_DM_EDGE_HIGH (0) 
+    // 0x00000040 [6]     USBPHY_DM_EDGE_LOW (0) 
+    // 0x00000020 [5]     USBPHY_DM_LEVEL_HIGH (0) 
+    // 0x00000010 [4]     USBPHY_DM_LEVEL_LOW (0) 
+    // 0x00000008 [3]     USBPHY_DP_EDGE_HIGH (0) 
+    // 0x00000004 [2]     USBPHY_DP_EDGE_LOW (0) 
+    // 0x00000002 [1]     USBPHY_DP_LEVEL_HIGH (0) 
+    // 0x00000001 [0]     USBPHY_DP_LEVEL_LOW (0) 
+    io_rw_32 intr;
+ 
+    union {
+        struct {
+            io_qspi_irq_ctrl_hw_t proc0_irq_ctrl;
+            io_qspi_irq_ctrl_hw_t proc1_irq_ctrl;
+            io_qspi_irq_ctrl_hw_t dormant_wake_irq_ctrl;
+        };
+        io_qspi_irq_ctrl_hw_t irq_ctrl[3];
+    };
+} io_qspi_hw_t;
+
+#define io_qspi_hw ((io_qspi_hw_t *)IO_QSPI_BASE)
+static_assert(sizeof (io_qspi_hw_t) == 0x0240, "");
+
+#endif // _HARDWARE_STRUCTS_IO_QSPI_H
+