Add STM32F103 port

Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>

1 files changed, 717 insertions, 0 deletions

diff --git a/lib/hal-stm32f1/include/stm32f1xx_hal_sd.h b/lib/hal-stm32f1/include/stm32f1xx_hal_sd.h
new file mode 100644
index 00000000..21695957
--- /dev/null
+++ b/lib/hal-stm32f1/include/stm32f1xx_hal_sd.h
@@ -0,0 +1,717 @@
+/**

+  ******************************************************************************

+  * @file    stm32f1xx_hal_sd.h

+  * @author  MCD Application Team

+  * @version V1.1.1

+  * @date    12-May-2017

+  * @brief   Header file of SD HAL module.

+  ******************************************************************************

+  * @attention

+  *

+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>

+  *

+  * Redistribution and use in source and binary forms, with or without modification,

+  * are permitted provided that the following conditions are met:

+  *   1. Redistributions of source code must retain the above copyright notice,

+  *      this list of conditions and the following disclaimer.

+  *   2. Redistributions in binary form must reproduce the above copyright notice,

+  *      this list of conditions and the following disclaimer in the documentation

+  *      and/or other materials provided with the distribution.

+  *   3. Neither the name of STMicroelectronics nor the names of its contributors

+  *      may be used to endorse or promote products derived from this software

+  *      without specific prior written permission.

+  *

+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+  *

+  ******************************************************************************

+  */ 

+

+/* Define to prevent recursive inclusion -------------------------------------*/

+#ifndef __STM32F1xx_HAL_SD_H

+#define __STM32F1xx_HAL_SD_H

+

+#if defined(STM32F103xE) || defined(STM32F103xG)

+

+#ifdef __cplusplus

+ extern "C" {

+#endif

+

+/* Includes ------------------------------------------------------------------*/

+#include "stm32f1xx_ll_sdmmc.h"

+

+/** @addtogroup STM32F1xx_HAL_Driver

+  * @{

+  */

+

+/** @defgroup SD SD

+  * @brief SD HAL module driver

+  * @{

+  */ 

+

+/* Exported types ------------------------------------------------------------*/ 

+/** @defgroup SD_Exported_Types SD Exported Types

+  * @{

+  */

+

+/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure

+  * @{

+  */   

+typedef enum

+{

+  HAL_SD_STATE_RESET                  = 0x00000000U,  /*!< SD not yet initialized or disabled  */

+  HAL_SD_STATE_READY                  = 0x00000001U,  /*!< SD initialized and ready for use    */

+  HAL_SD_STATE_TIMEOUT                = 0x00000002U,  /*!< SD Timeout state                    */

+  HAL_SD_STATE_BUSY                   = 0x00000003U,  /*!< SD process ongoing                  */

+  HAL_SD_STATE_PROGRAMMING            = 0x00000004U,  /*!< SD Programming State                */

+  HAL_SD_STATE_RECEIVING              = 0x00000005U,  /*!< SD Receinving State                 */

+  HAL_SD_STATE_TRANSFER               = 0x00000006U,  /*!< SD Transfert State                  */

+  HAL_SD_STATE_ERROR                  = 0x0000000FU   /*!< SD is in error state                */

+}HAL_SD_StateTypeDef;

+/** 

+  * @}

+  */

+

+/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure

+  * @{

+  */   

+typedef enum

+{

+  HAL_SD_CARD_READY                  = 0x00000001U,  /*!< Card state is ready                     */

+  HAL_SD_CARD_IDENTIFICATION         = 0x00000002U,  /*!< Card is in identification state         */

+  HAL_SD_CARD_STANDBY                = 0x00000003U,  /*!< Card is in standby state                */

+  HAL_SD_CARD_TRANSFER               = 0x00000004U,  /*!< Card is in transfer state               */  

+  HAL_SD_CARD_SENDING                = 0x00000005U,  /*!< Card is sending an operation            */

+  HAL_SD_CARD_RECEIVING              = 0x00000006U,  /*!< Card is receiving operation information */

+  HAL_SD_CARD_PROGRAMMING            = 0x00000007U,  /*!< Card is in programming state            */

+  HAL_SD_CARD_DISCONNECTED           = 0x00000008U,  /*!< Card is disconnected                    */

+  HAL_SD_CARD_ERROR                  = 0x000000FFU   /*!< Card response Error                     */

+}HAL_SD_CardStateTypeDef;

+/** 

+  * @}

+  */

+

+/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition   

+  * @{

+  */

+#define SD_InitTypeDef      SDIO_InitTypeDef 

+#define SD_TypeDef          SDIO_TypeDef

+

+/** 

+  * @brief  SD Card Information Structure definition

+  */ 

+typedef struct

+{

+  uint32_t CardType;                     /*!< Specifies the card Type                         */

+  

+  uint32_t CardVersion;                  /*!< Specifies the card version                      */

+

+  uint32_t Class;                        /*!< Specifies the class of the card class           */

+

+  uint32_t RelCardAdd;                   /*!< Specifies the Relative Card Address             */

+  

+  uint32_t BlockNbr;                     /*!< Specifies the Card Capacity in blocks           */

+

+  uint32_t BlockSize;                    /*!< Specifies one block size in bytes               */

+  

+  uint32_t LogBlockNbr;                  /*!< Specifies the Card logical Capacity in blocks   */

+

+  uint32_t LogBlockSize;                 /*!< Specifies logical block size in bytes           */

+

+}HAL_SD_CardInfoTypeDef;

+

+/** 

+  * @brief  SD handle Structure definition

+  */ 

+typedef struct

+{

+  SD_TypeDef                   *Instance;        /*!< SD registers base address           */

+  

+  SD_InitTypeDef               Init;             /*!< SD required parameters              */

+  

+  HAL_LockTypeDef              Lock;             /*!< SD locking object                   */

+  

+  uint32_t                     *pTxBuffPtr;      /*!< Pointer to SD Tx transfer Buffer    */

+

+  uint32_t                     TxXferSize;       /*!< SD Tx Transfer size                 */

+

+  uint32_t                     *pRxBuffPtr;      /*!< Pointer to SD Rx transfer Buffer    */

+

+  uint32_t                     RxXferSize;       /*!< SD Rx Transfer size                 */

+  

+  __IO uint32_t                Context;          /*!< SD transfer context                 */

+ 

+  __IO HAL_SD_StateTypeDef     State;            /*!< SD card State                       */

+  

+  __IO uint32_t                ErrorCode;        /*!< SD Card Error codes                 */  

+ 

+  DMA_HandleTypeDef            *hdmarx;          /*!< SD Rx DMA handle parameters         */

+  

+  DMA_HandleTypeDef            *hdmatx;          /*!< SD Tx DMA handle parameters         */

+  

+  HAL_SD_CardInfoTypeDef       SdCard;           /*!< SD Card information                 */

+  

+  uint32_t                     CSD[4];           /*!< SD card specific data table         */

+  

+  uint32_t                     CID[4];           /*!< SD card identification number table */

+  

+}SD_HandleTypeDef;

+

+/** 

+  * @}

+  */

+

+/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register 

+  * @{

+  */

+typedef struct

+{

+  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */

+  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */

+  __IO uint8_t  Reserved1;            /*!< Reserved                              */

+  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */

+  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */

+  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */

+  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */

+  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */

+  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */

+  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */

+  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */

+  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */

+  __IO uint8_t  Reserved2;            /*!< Reserved                              */

+  __IO uint32_t DeviceSize;           /*!< Device Size                           */

+  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */

+  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */

+  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */

+  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */

+  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */

+  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */

+  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */

+  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */

+  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */

+  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */

+  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */

+  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */

+  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */

+  __IO uint8_t  Reserved3;            /*!< Reserved                              */

+  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */

+  __IO uint8_t  FileFormatGrouop;     /*!< File format group                     */

+  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */

+  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */

+  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */

+  __IO uint8_t  FileFormat;           /*!< File format                           */

+  __IO uint8_t  ECC;                  /*!< ECC code                              */

+  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */

+  __IO uint8_t  Reserved4;            /*!< Always 1                              */

+  

+}HAL_SD_CardCSDTypeDef;

+/** 

+  * @}

+  */

+

+/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register

+  * @{

+  */

+typedef struct

+{

+  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */

+  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */

+  __IO uint32_t ProdName1;       /*!< Product Name part1    */

+  __IO uint8_t  ProdName2;       /*!< Product Name part2    */

+  __IO uint8_t  ProdRev;         /*!< Product Revision      */

+  __IO uint32_t ProdSN;          /*!< Product Serial Number */

+  __IO uint8_t  Reserved1;       /*!< Reserved1             */

+  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */

+  __IO uint8_t  CID_CRC;         /*!< CID CRC               */

+  __IO uint8_t  Reserved2;       /*!< Always 1              */

+

+}HAL_SD_CardCIDTypeDef;

+/** 

+  * @}

+  */

+

+/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 

+  * @{

+  */

+typedef struct

+{

+  __IO uint8_t  DataBusWidth;           /*!< Shows the currently defined data bus width                 */

+  __IO uint8_t  SecuredMode;            /*!< Card is in secured mode of operation                       */

+  __IO uint16_t CardType;               /*!< Carries information about card type                        */

+  __IO uint32_t ProtectedAreaSize;      /*!< Carries information about the capacity of protected area   */

+  __IO uint8_t  SpeedClass;             /*!< Carries information about the speed class of the card      */

+  __IO uint8_t  PerformanceMove;        /*!< Carries information about the card's performance move      */

+  __IO uint8_t  AllocationUnitSize;     /*!< Carries information about the card's allocation unit size  */

+  __IO uint16_t EraseSize;              /*!< Determines the number of AUs to be erased in one operation */

+  __IO uint8_t  EraseTimeout;           /*!< Determines the timeout for any number of AU erase          */

+  __IO uint8_t  EraseOffset;            /*!< Carries information about the erase offset                 */

+

+}HAL_SD_CardStatusTypeDef;

+/** 

+  * @}

+  */

+

+/** 

+  * @}

+  */

+

+/* Exported constants --------------------------------------------------------*/

+/** @defgroup SD_Exported_Constants Exported Constants

+  * @{

+  */

+

+#define BLOCKSIZE   512U /*!< Block size is 512 bytes */

+

+/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition 

+  * @{

+  */  

+#define HAL_SD_ERROR_NONE                     SDMMC_ERROR_NONE                    /*!< No error                                                      */

+#define HAL_SD_ERROR_CMD_CRC_FAIL             SDMMC_ERROR_CMD_CRC_FAIL            /*!< Command response received (but CRC check failed)              */

+#define HAL_SD_ERROR_DATA_CRC_FAIL            SDMMC_ERROR_DATA_CRC_FAIL           /*!< Data block sent/received (CRC check failed)                   */

+#define HAL_SD_ERROR_CMD_RSP_TIMEOUT          SDMMC_ERROR_CMD_RSP_TIMEOUT         /*!< Command response timeout                                      */

+#define HAL_SD_ERROR_DATA_TIMEOUT             SDMMC_ERROR_DATA_TIMEOUT            /*!< Data timeout                                                  */

+#define HAL_SD_ERROR_TX_UNDERRUN              SDMMC_ERROR_TX_UNDERRUN             /*!< Transmit FIFO underrun                                        */

+#define HAL_SD_ERROR_RX_OVERRUN               SDMMC_ERROR_RX_OVERRUN              /*!< Receive FIFO overrun                                          */

+#define HAL_SD_ERROR_ADDR_MISALIGNED          SDMMC_ERROR_ADDR_MISALIGNED         /*!< Misaligned address                                            */

+#define HAL_SD_ERROR_BLOCK_LEN_ERR            SDMMC_ERROR_BLOCK_LEN_ERR           /*!< Transferred block length is not allowed for the card or the 

+                                                                                       number of transferred bytes does not match the block length   */

+#define HAL_SD_ERROR_ERASE_SEQ_ERR            SDMMC_ERROR_ERASE_SEQ_ERR           /*!< An error in the sequence of erase command occurs              */

+#define HAL_SD_ERROR_BAD_ERASE_PARAM          SDMMC_ERROR_BAD_ERASE_PARAM         /*!< An invalid selection for erase groups                         */

+#define HAL_SD_ERROR_WRITE_PROT_VIOLATION     SDMMC_ERROR_WRITE_PROT_VIOLATION    /*!< Attempt to program a write protect block                      */

+#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED       SDMMC_ERROR_LOCK_UNLOCK_FAILED      /*!< Sequence or password error has been detected in unlock 

+                                                                                       command or if there was an attempt to access a locked card    */

+#define HAL_SD_ERROR_COM_CRC_FAILED           SDMMC_ERROR_COM_CRC_FAILED          /*!< CRC check of the previous command failed                      */

+#define HAL_SD_ERROR_ILLEGAL_CMD              SDMMC_ERROR_ILLEGAL_CMD             /*!< Command is not legal for the card state                       */

+#define HAL_SD_ERROR_CARD_ECC_FAILED          SDMMC_ERROR_CARD_ECC_FAILED         /*!< Card internal ECC was applied but failed to correct the data  */

+#define HAL_SD_ERROR_CC_ERR                   SDMMC_ERROR_CC_ERR                  /*!< Internal card controller error                                */

+#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR      SDMMC_ERROR_GENERAL_UNKNOWN_ERR     /*!< General or unknown error                                      */

+#define HAL_SD_ERROR_STREAM_READ_UNDERRUN     SDMMC_ERROR_STREAM_READ_UNDERRUN    /*!< The card could not sustain data reading in stream rmode       */

+#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN     SDMMC_ERROR_STREAM_WRITE_OVERRUN    /*!< The card could not sustain data programming in stream mode    */

+#define HAL_SD_ERROR_CID_CSD_OVERWRITE        SDMMC_ERROR_CID_CSD_OVERWRITE       /*!< CID/CSD overwrite error                                       */

+#define HAL_SD_ERROR_WP_ERASE_SKIP            SDMMC_ERROR_WP_ERASE_SKIP           /*!< Only partial address space was erased                         */

+#define HAL_SD_ERROR_CARD_ECC_DISABLED        SDMMC_ERROR_CARD_ECC_DISABLED       /*!< Command has been executed without using internal ECC          */

+#define HAL_SD_ERROR_ERASE_RESET              SDMMC_ERROR_ERASE_RESET             /*!< Erase sequence was cleared before executing because an out 

+                                                                                       of erase sequence command was received                        */

+#define HAL_SD_ERROR_AKE_SEQ_ERR              SDMMC_ERROR_AKE_SEQ_ERR             /*!< Error in sequence of authentication                           */

+#define HAL_SD_ERROR_INVALID_VOLTRANGE        SDMMC_ERROR_INVALID_VOLTRANGE       /*!< Error in case of invalid voltage range                        */        

+#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE        SDMMC_ERROR_ADDR_OUT_OF_RANGE       /*!< Error when addressed block is out of range                    */        

+#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE   SDMMC_ERROR_REQUEST_NOT_APPLICABLE  /*!< Error when command request is not applicable                  */  

+#define HAL_SD_ERROR_PARAM                    SDMMC_ERROR_INVALID_PARAMETER       /*!< the used parameter is not valid                               */  

+#define HAL_SD_ERROR_UNSUPPORTED_FEATURE      SDMMC_ERROR_UNSUPPORTED_FEATURE     /*!< Error when feature is not insupported                         */

+#define HAL_SD_ERROR_BUSY                     SDMMC_ERROR_BUSY                    /*!< Error when transfer process is busy                           */ 

+#define HAL_SD_ERROR_DMA                      SDMMC_ERROR_DMA                     /*!< Error while DMA transfer                                      */

+#define HAL_SD_ERROR_TIMEOUT                  SDMMC_ERROR_TIMEOUT                 /*!< Timeout error                                                 */

+                                                

+/** 

+  * @}

+  */

+ 

+/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration

+  * @{

+  */ 

+#define   SD_CONTEXT_NONE                 0x00000000U  /*!< None                             */

+#define   SD_CONTEXT_READ_SINGLE_BLOCK    0x00000001U  /*!< Read single block operation      */

+#define   SD_CONTEXT_READ_MULTIPLE_BLOCK  0x00000002U  /*!< Read multiple blocks operation   */

+#define   SD_CONTEXT_WRITE_SINGLE_BLOCK   0x00000010U  /*!< Write single block operation     */

+#define   SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U  /*!< Write multiple blocks operation  */

+#define   SD_CONTEXT_IT                   0x00000008U  /*!< Process in Interrupt mode        */

+#define   SD_CONTEXT_DMA                  0x00000080U  /*!< Process in DMA mode              */  

+

+/**

+  * @}

+  */

+

+/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards

+  * @{

+  */

+#define CARD_SDSC                  0x00000000U

+#define CARD_SDHC_SDXC             0x00000001U

+#define CARD_SECURED               0x00000003U

+    

+/**

+  * @}

+  */

+

+/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version

+  * @{

+  */

+#define CARD_V1_X                  0x00000000U

+#define CARD_V2_X                  0x00000001U

+/**

+  * @}

+  */

+      

+/**

+  * @}

+  */

+  

+/* Exported macro ------------------------------------------------------------*/

+/** @defgroup SD_Exported_macros SD Exported Macros

+ *  @brief macros to handle interrupts and specific clock configurations

+ * @{

+ */

+ 

+/**

+  * @brief  Enable the SD device.

+  * @retval None

+  */ 

+#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)

+

+/**

+  * @brief  Disable the SD device.

+  * @retval None

+  */

+#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)

+

+/**

+  * @brief  Enable the SDMMC DMA transfer.

+  * @retval None

+  */ 

+#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)

+

+/**

+  * @brief  Disable the SDMMC DMA transfer.

+  * @retval None

+  */

+#define __HAL_SD_DMA_DISABLE(__HANDLE__)  __SDIO_DMA_DISABLE((__HANDLE__)->Instance)

+ 

+/**

+  * @brief  Enable the SD device interrupt.

+  * @param  __HANDLE__: SD Handle  

+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.

+  *         This parameter can be one or a combination of the following values:

+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt

+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt

+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt

+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt

+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt

+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt

+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt

+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt

+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt

+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt

+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt

+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt

+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt

+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt

+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt

+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt

+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt

+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt

+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt

+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt

+  * @retval None

+  */

+#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))

+

+/**

+  * @brief  Disable the SD device interrupt.

+  * @param  __HANDLE__: SD Handle   

+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.

+  *          This parameter can be one or a combination of the following values:

+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt

+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt

+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt

+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt

+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt

+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt

+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt

+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt

+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt

+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt

+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt

+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt

+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt

+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt

+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt

+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt

+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt

+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt

+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt

+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt   

+  * @retval None

+  */

+#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))

+

+/**

+  * @brief  Check whether the specified SD flag is set or not. 

+  * @param  __HANDLE__: SD Handle   

+  * @param  __FLAG__: specifies the flag to check. 

+  *          This parameter can be one of the following values:

+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)

+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)

+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout

+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout

+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error

+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error

+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)

+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)

+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)

+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)

+  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress

+  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress

+  *            @arg SDIO_FLAG_RXACT:    Data receive in progress

+  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty

+  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full

+  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full

+  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full

+  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty

+  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty

+  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO

+  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO

+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received

+  * @retval The new state of SD FLAG (SET or RESET).

+  */

+#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))

+

+/**

+  * @brief  Clear the SD's pending flags.

+  * @param  __HANDLE__: SD Handle  

+  * @param  __FLAG__: specifies the flag to clear.  

+  *          This parameter can be one or a combination of the following values:

+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)

+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)

+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout

+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout

+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error

+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error

+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)

+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)

+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)

+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)

+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received

+  * @retval None

+  */

+#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))

+

+/**

+  * @brief  Check whether the specified SD interrupt has occurred or not.

+  * @param  __HANDLE__: SD Handle   

+  * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check. 

+  *          This parameter can be one of the following values:

+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt

+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt

+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt

+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt

+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt

+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt

+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt

+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt

+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt

+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt

+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt

+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt

+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt

+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt

+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt

+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt

+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt

+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt

+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt

+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt

+  * @retval The new state of SD IT (SET or RESET).

+  */

+#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))

+

+/**

+  * @brief  Clear the SD's interrupt pending bits.

+  * @param  __HANDLE__: SD Handle

+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. 

+  *          This parameter can be one or a combination of the following values:

+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt

+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt

+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt

+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt

+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt

+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt

+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt

+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt

+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDMMC_DCOUNT, is zero) interrupt

+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt

+  * @retval None

+  */

+#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))

+

+/**

+  * @}

+  */

+  

+/* Exported functions --------------------------------------------------------*/

+/** @defgroup SD_Exported_Functions SD Exported Functions

+  * @{

+  */

+  

+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions

+  * @{

+  */

+HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);

+HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);

+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);

+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);

+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);

+/**

+  * @}

+  */

+  

+/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions

+  * @{

+  */

+/* Blocking mode: Polling */

+HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);

+HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);

+HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);

+/* Non-Blocking mode: IT */

+HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);

+HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);

+/* Non-Blocking mode: DMA */

+HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);

+HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);

+

+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);

+

+/* Callback in non blocking modes (DMA) */

+void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);

+void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);

+void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);

+void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);

+/**

+  * @}

+  */

+  

+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions

+  * @{

+  */

+HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);

+/**

+  * @}

+  */

+

+/** @defgroup SD_Exported_Functions_Group4 SD card related functions

+  * @{

+  */

+HAL_StatusTypeDef       HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);

+HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);

+HAL_StatusTypeDef       HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);

+HAL_StatusTypeDef       HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);

+HAL_StatusTypeDef       HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);

+HAL_StatusTypeDef       HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);

+/**

+  * @}

+  */

+

+/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions

+  * @{

+  */

+HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);

+uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);

+/**

+  * @}

+  */

+

+/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management

+  * @{

+  */

+HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);

+HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);

+/**

+  * @}

+  */

+    

+/* Private types -------------------------------------------------------------*/

+/** @defgroup SD_Private_Types SD Private Types

+  * @{

+  */

+

+/**

+  * @}

+  */ 

+

+/* Private defines -----------------------------------------------------------*/

+/** @defgroup SD_Private_Defines SD Private Defines

+  * @{

+  */

+

+/**

+  * @}

+  */ 

+          

+/* Private variables ---------------------------------------------------------*/

+/** @defgroup SD_Private_Variables SD Private Variables

+  * @{

+  */

+

+/**

+  * @}

+  */ 

+

+/* Private constants ---------------------------------------------------------*/

+/** @defgroup SD_Private_Constants SD Private Constants

+  * @{

+  */

+

+/**

+  * @}

+  */ 

+

+/* Private macros ------------------------------------------------------------*/

+/** @defgroup SD_Private_Macros SD Private Macros

+  * @{

+  */

+

+/**

+  * @}

+  */

+

+/* Private functions prototypes ----------------------------------------------*/

+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes

+  * @{

+  */

+

+/**

+  * @}

+  */

+

+/* Private functions ---------------------------------------------------------*/

+/** @defgroup SD_Private_Functions SD Private Functions

+  * @{

+  */

+

+/**

+  * @}

+  */

+

+

+/**

+  * @}

+  */ 

+

+/**

+  * @}

+  */

+

+/**

+  * @}

+  */

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* STM32F103xE || STM32F103xG */

+

+#endif /* __STM32F1xx_HAL_SD_H */ 

+

+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/