Add STM32F103 port

Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>

1 files changed, 493 insertions, 0 deletions

diff --git a/lib/hal-stm32f1/include/stm32f1xx_hal_i2s.h b/lib/hal-stm32f1/include/stm32f1xx_hal_i2s.h
new file mode 100644
index 00000000..f8cd3119
--- /dev/null
+++ b/lib/hal-stm32f1/include/stm32f1xx_hal_i2s.h
@@ -0,0 +1,493 @@
+/**

+  ******************************************************************************

+  * @file    stm32f1xx_hal_i2s.h

+  * @author  MCD Application Team

+  * @version V1.1.1

+  * @date    12-May-2017

+  * @brief   Header file of I2S HAL module.

+  ******************************************************************************

+  * @attention

+  *

+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>

+  *

+  * Redistribution and use in source and binary forms, with or without modification,

+  * are permitted provided that the following conditions are met:

+  *   1. Redistributions of source code must retain the above copyright notice,

+  *      this list of conditions and the following disclaimer.

+  *   2. Redistributions in binary form must reproduce the above copyright notice,

+  *      this list of conditions and the following disclaimer in the documentation

+  *      and/or other materials provided with the distribution.

+  *   3. Neither the name of STMicroelectronics nor the names of its contributors

+  *      may be used to endorse or promote products derived from this software

+  *      without specific prior written permission.

+  *

+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+  *

+  ******************************************************************************

+  */

+

+/* Define to prevent recursive inclusion -------------------------------------*/

+#ifndef __STM32F1xx_HAL_I2S_H

+#define __STM32F1xx_HAL_I2S_H

+

+#ifdef __cplusplus

+ extern "C" {

+#endif

+

+#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)

+

+/* Includes ------------------------------------------------------------------*/

+#include "stm32f1xx_hal_def.h"  

+

+/** @addtogroup STM32F1xx_HAL_Driver

+  * @{

+  */

+

+/** @addtogroup I2S

+  * @{

+  */

+

+/* Exported types ------------------------------------------------------------*/

+/** @defgroup I2S_Exported_Types I2S Exported Types

+  * @{

+  */

+

+/**

+  * @brief I2S Init structure definition

+  */

+typedef struct

+{

+  uint32_t Mode;            /*!< Specifies the I2S operating mode.

+                                 This parameter can be a value of @ref I2S_Mode */

+

+  uint32_t Standard;        /*!< Specifies the standard used for the I2S communication.

+                                 This parameter can be a value of @ref I2S_Standard */

+

+  uint32_t DataFormat;      /*!< Specifies the data format for the I2S communication.

+                                 This parameter can be a value of @ref I2S_Data_Format */

+

+  uint32_t MCLKOutput;      /*!< Specifies whether the I2S MCLK output is enabled or not.

+                                 This parameter can be a value of @ref I2S_MCLK_Output */

+

+  uint32_t AudioFreq;       /*!< Specifies the frequency selected for the I2S communication.

+                                 This parameter can be a value of @ref I2S_Audio_Frequency */

+

+  uint32_t CPOL;            /*!< Specifies the idle state of the I2S clock.

+                                 This parameter can be a value of @ref I2S_Clock_Polarity */

+}I2S_InitTypeDef;

+

+/**

+  * @brief  HAL State structures definition

+  */

+typedef enum

+{

+  HAL_I2S_STATE_RESET      = 0x00U,  /*!< I2S not yet initialized or disabled                */

+  HAL_I2S_STATE_READY      = 0x01U,  /*!< I2S initialized and ready for use                  */

+  HAL_I2S_STATE_BUSY       = 0x02U,  /*!< I2S internal process is ongoing                    */

+  HAL_I2S_STATE_BUSY_TX    = 0x03U,  /*!< Data Transmission process is ongoing               */

+  HAL_I2S_STATE_BUSY_RX    = 0x04U,  /*!< Data Reception process is ongoing                  */

+  HAL_I2S_STATE_BUSY_TX_RX = 0x05U,  /*!< Data Transmission and Reception process is ongoing */

+  HAL_I2S_STATE_TIMEOUT    = 0x06U,  /*!< I2S timeout state                                  */

+  HAL_I2S_STATE_ERROR      = 0x07U   /*!< I2S error state                                    */

+

+}HAL_I2S_StateTypeDef;

+

+/**

+  * @brief I2S handle Structure definition

+  */

+typedef struct __I2S_HandleTypeDef

+{

+  SPI_TypeDef                *Instance;    /*!< I2S registers base address        */

+

+  I2S_InitTypeDef            Init;         /*!< I2S communication parameters      */

+

+  uint16_t                   *pTxBuffPtr;  /*!< Pointer to I2S Tx transfer buffer */

+

+  __IO uint16_t              TxXferSize;   /*!< I2S Tx transfer size              */

+

+  __IO uint16_t              TxXferCount;  /*!< I2S Tx transfer Counter           */

+

+  uint16_t                   *pRxBuffPtr;  /*!< Pointer to I2S Rx transfer buffer */

+

+  __IO uint16_t              RxXferSize;   /*!< I2S Rx transfer size              */

+

+  __IO uint16_t              RxXferCount;  /*!< I2S Rx transfer counter

+                                              (This field is initialized at the

+                                               same value as transfer size at the

+                                               beginning of the transfer and

+                                               decremented when a sample is received

+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */

+

+  void (*IrqHandlerISR)      (struct __I2S_HandleTypeDef *hi2s);   /*!< I2S function pointer on IrqHandler   */

+

+  DMA_HandleTypeDef          *hdmatx;      /*!< I2S Tx DMA handle parameters      */

+

+  DMA_HandleTypeDef          *hdmarx;      /*!< I2S Rx DMA handle parameters      */

+

+  __IO HAL_LockTypeDef       Lock;         /*!< I2S locking object                */

+

+  __IO HAL_I2S_StateTypeDef  State;        /*!< I2S communication state           */

+

+  __IO uint32_t              ErrorCode;    /*!< I2S Error code

+                                              This parameter can be a value of @ref I2S_ErrorCode */

+

+}I2S_HandleTypeDef;

+/**

+  * @}

+  */

+

+/* Exported constants --------------------------------------------------------*/

+/** @defgroup I2S_Exported_Constants I2S Exported Constants

+  * @{

+  */

+/**

+  * @defgroup  I2S_ErrorCode I2S Error Code

+  * @{

+  */

+#define HAL_I2S_ERROR_NONE               0x00000000U  /*!< No error                    */

+#define HAL_I2S_ERROR_TIMEOUT            0x00000001U  /*!< Timeout error               */

+#define HAL_I2S_ERROR_OVR                0x00000002U  /*!< OVR error                   */

+#define HAL_I2S_ERROR_UDR                0x00000004U  /*!< UDR error                   */

+#define HAL_I2S_ERROR_DMA                0x00000008U  /*!< DMA transfer error          */

+#define HAL_I2S_ERROR_PRESCALER          0x00000010U  /*!< Prescaler Calculation error */

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Mode I2S Mode

+  * @{

+  */

+#define I2S_MODE_SLAVE_TX                0x00000000U

+#define I2S_MODE_SLAVE_RX                ((uint32_t)SPI_I2SCFGR_I2SCFG_0)

+#define I2S_MODE_MASTER_TX               ((uint32_t)SPI_I2SCFGR_I2SCFG_1)

+#define I2S_MODE_MASTER_RX               ((uint32_t)(SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1))

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Standard I2S Standard

+  * @{

+  */

+#define I2S_STANDARD_PHILIPS             0x00000000U

+#define I2S_STANDARD_MSB                 ((uint32_t)SPI_I2SCFGR_I2SSTD_0)

+#define I2S_STANDARD_LSB                 ((uint32_t)SPI_I2SCFGR_I2SSTD_1)

+#define I2S_STANDARD_PCM_SHORT           ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1))

+#define I2S_STANDARD_PCM_LONG            ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC))

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Data_Format I2S Data Format

+  * @{

+  */

+#define I2S_DATAFORMAT_16B               0x00000000U

+#define I2S_DATAFORMAT_16B_EXTENDED      ((uint32_t)SPI_I2SCFGR_CHLEN)

+#define I2S_DATAFORMAT_24B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))

+#define I2S_DATAFORMAT_32B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))

+/**

+  * @}

+  */

+

+/** @defgroup I2S_MCLK_Output I2S Mclk Output

+  * @{

+  */

+#define I2S_MCLKOUTPUT_ENABLE           ((uint32_t)SPI_I2SPR_MCKOE)

+#define I2S_MCLKOUTPUT_DISABLE          0x00000000U

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency

+  * @{

+  */

+#define I2S_AUDIOFREQ_192K               192000U

+#define I2S_AUDIOFREQ_96K                96000U

+#define I2S_AUDIOFREQ_48K                48000U

+#define I2S_AUDIOFREQ_44K                44100U

+#define I2S_AUDIOFREQ_32K                32000U

+#define I2S_AUDIOFREQ_22K                22050U

+#define I2S_AUDIOFREQ_16K                16000U

+#define I2S_AUDIOFREQ_11K                11025U

+#define I2S_AUDIOFREQ_8K                 8000U

+#define I2S_AUDIOFREQ_DEFAULT            2U

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Clock_Polarity  I2S Clock Polarity

+  * @{

+  */

+#define I2S_CPOL_LOW                    0x00000000U

+#define I2S_CPOL_HIGH                   ((uint32_t)SPI_I2SCFGR_CKPOL)

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition

+  * @{

+  */

+#define I2S_IT_TXE                      SPI_CR2_TXEIE

+#define I2S_IT_RXNE                     SPI_CR2_RXNEIE

+#define I2S_IT_ERR                      SPI_CR2_ERRIE

+/**

+  * @}

+  */

+

+/** @defgroup I2S_Flags_Definition I2S Flags Definition

+  * @{

+  */

+#define I2S_FLAG_TXE                    SPI_SR_TXE

+#define I2S_FLAG_RXNE                   SPI_SR_RXNE

+

+#define I2S_FLAG_UDR                    SPI_SR_UDR

+#define I2S_FLAG_OVR                    SPI_SR_OVR

+#define I2S_FLAG_FRE                    SPI_SR_FRE

+

+#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE

+#define I2S_FLAG_BSY                    SPI_SR_BSY

+/**

+  * @}

+  */

+

+/**

+  * @}

+  */

+

+/* Exported macro ------------------------------------------------------------*/

+/** @defgroup I2S_Exported_Macros I2S Exported Macros

+  * @{

+  */

+

+/** @brief Reset I2S handle state

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @retval None

+  */

+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)

+

+/** @brief  Enable the specified SPI peripheral (in I2S mode).

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @retval None

+  */

+#define __HAL_I2S_ENABLE(__HANDLE__)    (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))

+

+/** @brief  Disable the specified SPI peripheral (in I2S mode).

+  * @param  __HANDLE__: specifies the I2S Handle. 

+  * @retval None

+  */

+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))

+

+/** @brief  Enable the specified I2S interrupts.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.

+  *         This parameter can be one of the following values:

+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable

+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable

+  *            @arg I2S_IT_ERR: Error interrupt enable

+  * @retval None

+  */

+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__)    (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))

+

+/** @brief  Disable the specified I2S interrupts.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.

+  *         This parameter can be one of the following values:

+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable

+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable

+  *            @arg I2S_IT_ERR: Error interrupt enable

+  * @retval None

+  */ 

+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))

+ 

+/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.

+  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.

+  *          This parameter can be one of the following values:

+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable

+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable

+  *            @arg I2S_IT_ERR: Error interrupt enable

+  * @retval The new state of __IT__ (TRUE or FALSE).

+  */

+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

+

+/** @brief  Checks whether the specified I2S flag is set or not.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @param  __FLAG__: specifies the flag to check.

+  *         This parameter can be one of the following values:

+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag

+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag

+  *            @arg I2S_FLAG_UDR: Underrun flag

+  *            @arg I2S_FLAG_OVR: Overrun flag

+  *            @arg I2S_FLAG_FRE: Frame error flag

+  *            @arg I2S_FLAG_CHSIDE: Channel Side flag

+  *            @arg I2S_FLAG_BSY: Busy flag

+  * @retval The new state of __FLAG__ (TRUE or FALSE).

+  */

+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))

+

+/** @brief Clears the I2S OVR pending flag.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @retval None

+  */

+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__)     \

+  do{                                           \

+    __IO uint32_t tmpreg = 0x00U;               \

+    tmpreg = (__HANDLE__)->Instance->DR;        \

+    tmpreg = (__HANDLE__)->Instance->SR;        \

+    UNUSED(tmpreg);                             \

+  } while(0U)

+

+/** @brief Clears the I2S UDR pending flag.

+  * @param  __HANDLE__: specifies the I2S Handle.

+  * @retval None

+  */

+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)     \

+  do{                                           \

+  __IO uint32_t tmpreg = 0x00U;                 \

+  tmpreg = (__HANDLE__)->Instance->SR;          \

+  UNUSED(tmpreg);                               \

+  } while(0U)

+/**

+  * @}

+  */

+

+/* Exported functions --------------------------------------------------------*/

+/** @addtogroup I2S_Exported_Functions

+  * @{

+  */

+

+/** @addtogroup I2S_Exported_Functions_Group1

+  * @{

+  */

+/* Initialization/de-initialization functions  ********************************/

+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);

+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);

+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);

+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);

+/**

+  * @}

+  */

+

+/** @addtogroup I2S_Exported_Functions_Group2

+  * @{

+  */

+/* I/O operation functions  ***************************************************/

+/* Blocking mode: Polling */

+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);

+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);

+

+ /* Non-Blocking mode: Interrupt */

+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);

+

+/* Non-Blocking mode: DMA */

+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);

+

+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);

+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);

+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);

+

+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/

+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);

+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);

+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);

+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);

+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);

+/**

+  * @}

+  */

+

+/** @addtogroup I2S_Exported_Functions_Group3

+  * @{

+  */

+/* Peripheral Control and State functions  ************************************/

+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);

+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);

+/**

+  * @}

+  */

+

+/**

+  * @}

+  */

+

+/* Private types -------------------------------------------------------------*/

+/* Private variables ---------------------------------------------------------*/

+/* Private constants ---------------------------------------------------------*/

+/** @defgroup I2S_Private_Constants I2S Private Constants

+  * @{

+  */

+

+/**

+  * @}

+  */

+

+/* Private macros ------------------------------------------------------------*/

+/** @defgroup I2S_Private_Macros I2S Private Macros

+  * @{

+  */

+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX)  || \

+                           ((MODE) == I2S_MODE_SLAVE_RX)  || \

+                           ((MODE) == I2S_MODE_MASTER_TX) || \

+                           ((MODE) == I2S_MODE_MASTER_RX))

+

+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \

+                                   ((STANDARD) == I2S_STANDARD_MSB)       || \

+                                   ((STANDARD) == I2S_STANDARD_LSB)       || \

+                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \

+                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))

+

+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \

+                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \

+                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \

+                                    ((FORMAT) == I2S_DATAFORMAT_32B))

+

+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \

+                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))

+

+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K)    && \

+                                  ((FREQ) <= I2S_AUDIOFREQ_192K)) || \

+                                  ((FREQ) == I2S_AUDIOFREQ_DEFAULT))

+

+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \

+                           ((CPOL) == I2S_CPOL_HIGH))

+/**

+  * @}

+  */

+

+/* Private Fonctions ---------------------------------------------------------*/

+/** @defgroup I2S_Private_Functions I2S Private Functions

+  * @{

+  */

+/* Private functions are defined in stm32f1xx_hal_i2s.c file */

+/**

+  * @}

+  */

+

+/**

+  * @}

+  */

+

+/**

+  * @}

+  */

+#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */

+

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* __STM32F1xx_HAL_I2S_H */

+

+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/