lib: Add stm32f0 hal and cmsis files

Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 2303 insertions, 0 deletions

diff --git a/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard.c b/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard.c
new file mode 100644
index 00000000..e111236f
--- /dev/null
+++ b/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard.c
@@ -0,0 +1,2303 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_smartcard.c
+  * @author  MCD Application Team
+  * @brief   SMARTCARD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the SMARTCARD peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Error functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The SMARTCARD HAL driver can be used as follows:
+
+    (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard).
+    (#) Associate a USART to the SMARTCARD handle hsmartcard.
+    (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
+        (++) Enable the USARTx interface clock.
+        (++) USART pins configuration:
+            (+++) Enable the clock for the USART GPIOs.
+            (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input).
+        (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+             and HAL_SMARTCARD_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+             and HAL_SMARTCARD_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx channel.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx channel.
+            (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+    (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
+        the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
+        error enabling or disabling in the hsmartcard handle Init structure.
+
+    (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
+        in the hsmartcard handle AdvancedInit structure.
+
+    (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
+        (++) This API configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
+             by calling the customized HAL_SMARTCARD_MspInit() API.
+        [..]
+        (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
+             RXNE interrupt and Error Interrupts) will be managed using the macros
+             __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+
+    [..]
+    [..] Three operation modes are available within this driver :
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
+       (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT()
+       (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
+       (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT()
+       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
+       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
+       (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
+       (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
+       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
+       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
+
+     *** SMARTCARD HAL driver macros list ***
+     ========================================
+     [..]
+       Below the list of most used macros in SMARTCARD HAL driver.
+
+       (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set
+       (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
+       (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
+       (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
+       (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled
+
+     [..]
+       (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SMARTCARD SMARTCARD
+  * @brief HAL SMARTCARD module driver
+  * @{
+  */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+#define SMARTCARD_TEACK_REACK_TIMEOUT               1000U      /*!< SMARTCARD TX or RX enable acknowledge time-out value  */
+
+#define USART_CR1_FIELDS      ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+                                          USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))       /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
+#define USART_CR2_CLK_FIELDS  ((uint32_t)(USART_CR2_CLKEN|USART_CR2_CPOL|USART_CR2_CPHA|USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */
+#define USART_CR2_FIELDS      ((uint32_t)(USART_CR2_RTOEN|USART_CR2_CLK_FIELDS|USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */
+#define USART_CR3_FIELDS      ((uint32_t)(USART_CR3_ONEBIT|USART_CR3_NACK|USART_CR3_SCARCNT))   /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions
+  * @{
+  */
+static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+  * @{
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+  ==============================================================================
+              ##### Initialization and Configuration functions #####
+  ==============================================================================
+  [..]
+  This subsection provides a set of functions allowing to initialize the USARTx
+  associated to the SmartCard.
+  [..]
+  The Smartcard interface is designed to support asynchronous protocol Smartcards as
+  defined in the ISO 7816-3 standard.
+  [..]
+  The USART can provide a clock to the smartcard through the SCLK output.
+  In smartcard mode, SCLK is not associated to the communication but is simply derived
+  from the internal peripheral input clock through a 5-bit prescaler.
+  [..]
+  (+) These parameters can be configured:
+      (++) Baud Rate
+      (++) Parity: should be enabled
+      (++) Receiver/transmitter modes
+      (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
+      (++) Prescaler value
+      (++) Guard bit time
+      (++) NACK enabling or disabling on transmission error
+
+  (+) The following advanced features can be configured as well:
+      (++) TX and/or RX pin level inversion
+      (++) data logical level inversion
+      (++) RX and TX pins swap
+      (++) RX overrun detection disabling
+      (++) DMA disabling on RX error
+      (++) MSB first on communication line
+      (++) Time out enabling (and if activated, timeout value)
+      (++) Block length
+      (++) Auto-retry counter
+  [..]
+  The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures
+  (details for the procedures are available in reference manual).
+
+@endverbatim
+  * @{
+  */
+
+/*
+  Additional Table:
+    Frame Length is fixed to 8 bits plus parity:
+    SMARTCARD frame format is given in the following table
+    +---------------------------------------------------------------+
+    | M1M0 bits |  PCE bit  |          SMARTCARD frame              |
+    |-----------------------|---------------------------------------|
+    |     01    |    1      |    | SB | 8 bit data | PB | STB |     |
+    +---------------------------------------------------------------+
+
+*/
+
+/**
+  * @brief  Initialize the SMARTCARD mode according to the specified
+  *         parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsmartcard == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the USART associated to the SMARTCARD handle */
+  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+
+  if(hsmartcard->gState == HAL_SMARTCARD_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsmartcard->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_SMARTCARD_MspInit(hsmartcard);
+  }
+
+  hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Disable the Peripheral to set smartcard mode */
+  CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+  /* In SmartCard mode, the following bits must be kept cleared:
+  - LINEN in the USART_CR2 register,
+  - HDSEL and IREN  bits in the USART_CR3 register.*/
+  CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN);
+  CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN));
+
+  /* set the USART in SMARTCARD mode */
+  SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN);
+
+  /* Set the SMARTCARD Communication parameters */
+  if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  }
+
+  if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
+  {
+    SMARTCARD_AdvFeatureConfig(hsmartcard);
+  }
+
+  /* Enable the Peripheral */
+  SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+  /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */
+  return (SMARTCARD_CheckIdleState(hsmartcard));
+}
+
+/**
+  * @brief  DeInitialize the SMARTCARD peripheral.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsmartcard == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the USART/UART associated to the SMARTCARD handle */
+  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+
+  hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+  WRITE_REG(hsmartcard->Instance->CR1, 0x0U);
+  WRITE_REG(hsmartcard->Instance->CR2, 0x0U);
+  WRITE_REG(hsmartcard->Instance->CR3, 0x0U);
+  WRITE_REG(hsmartcard->Instance->RTOR, 0x0U);
+  WRITE_REG(hsmartcard->Instance->GTPR, 0x0U);
+
+  /* DeInit the low level hardware */
+  HAL_SMARTCARD_MspDeInit(hsmartcard);
+
+  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+  hsmartcard->gState    = HAL_SMARTCARD_STATE_RESET;
+  hsmartcard->RxState   = HAL_SMARTCARD_STATE_RESET;
+
+  /* Process Unlock */
+  __HAL_UNLOCK(hsmartcard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the SMARTCARD MSP.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the SMARTCARD MSP.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspDeInit can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+  * @brief    SMARTCARD Transmit and Receive functions
+  *
+@verbatim
+  ==============================================================================
+                         ##### IO operation functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+
+  [..]
+    Smartcard is a single wire half duplex communication protocol.
+    The Smartcard interface is designed to support asynchronous protocol Smartcards as
+    defined in the ISO 7816-3 standard. The USART should be configured as:
+    (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
+    (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
+
+  [..]
+    (#) There are two modes of transfer:
+        (++) Blocking mode: The communication is performed in polling mode.
+             The HAL status of all data processing is returned by the same function
+             after finishing transfer.
+        (++) Non-Blocking mode: The communication is performed using Interrupts
+             or DMA, the relevant API's return the HAL status.
+             The end of the data processing will be indicated through the
+             dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
+             using DMA mode.
+        (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+             will be executed respectively at the end of the Transmit or Receive process
+             The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication
+             error is detected.
+
+    (#) Blocking mode APIs are :
+        (++) HAL_SMARTCARD_Transmit()
+        (++) HAL_SMARTCARD_Receive()
+
+    (#) Non Blocking mode APIs with Interrupt are :
+        (++) HAL_SMARTCARD_Transmit_IT()
+        (++) HAL_SMARTCARD_Receive_IT()
+        (++) HAL_SMARTCARD_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are :
+        (++) HAL_SMARTCARD_Transmit_DMA()
+        (++) HAL_SMARTCARD_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_SMARTCARD_TxCpltCallback()
+        (++) HAL_SMARTCARD_RxCpltCallback()
+        (++) HAL_SMARTCARD_ErrorCallback()
+
+    (#) Non-Blocking mode transfers could be aborted using Abort API's :
+        (++) HAL_SMARTCARD_Abort()
+        (++) HAL_SMARTCARD_AbortTransmit()
+        (++) HAL_SMARTCARD_AbortReceive()
+        (++) HAL_SMARTCARD_Abort_IT()
+        (++) HAL_SMARTCARD_AbortTransmit_IT()
+        (++) HAL_SMARTCARD_AbortReceive_IT()
+
+    (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided:
+        (++) HAL_SMARTCARD_AbortCpltCallback()
+        (++) HAL_SMARTCARD_AbortTransmitCpltCallback()
+        (++) HAL_SMARTCARD_AbortReceiveCpltCallback()
+
+    (#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
+        Errors are handled as follows :
+        (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is 
+             to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
+             Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
+             and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
+             If user wants to abort it, Abort services should be called by user.
+        (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
+             This concerns Frame Error in Interrupt mode tranmission, Overrun Error in Interrupt mode reception and all errors in DMA mode.
+             Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Send an amount of data in blocking mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be sent.
+  * @param  Timeout  Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check that a Tx process is not already ongoing */
+  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+    /* Init tickstart for timeout managment*/
+    tickstart = HAL_GetTick();
+
+    /* Disable the Peripheral first to update mode for TX master */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    /* Disable Rx, enable Tx */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
+    SET_BIT(hsmartcard->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST);
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
+    
+    /* Enable the Peripheral */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->TxXferSize = Size;
+    hsmartcard->TxXferCount = Size;
+
+    while(hsmartcard->TxXferCount > 0U)
+    {
+      hsmartcard->TxXferCount--;
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      hsmartcard->Instance->TDR = (*pData++ & (uint8_t)0xFFU);
+    }
+    if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+    /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */
+    if(hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
+    {
+      /* Disable the Peripheral first to update modes */
+      CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+      SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
+      /* Enable the Peripheral */
+      SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+    }
+    
+    /* At end of Tx process, restore hsmartcard->gState to Ready */
+    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be received.
+  * @param  Timeout Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = 0U;
+
+  /* Check that a Rx process is not already ongoing */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->RxState   = HAL_SMARTCARD_STATE_BUSY_RX;
+
+    /* Init tickstart for timeout managment*/
+    tickstart = HAL_GetTick();
+
+    hsmartcard->RxXferSize = Size;
+    hsmartcard->RxXferCount = Size;
+
+    /* Check the remain data to be received */
+    while(hsmartcard->RxXferCount > 0U)
+    {
+      hsmartcard->RxXferCount--;
+
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      *pData++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FFU);
+    }
+
+    /* At end of Rx process, restore hsmartcard->RxState to Ready */
+    hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be sent.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Tx process is not already ongoing */
+  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+    hsmartcard->pTxBuffPtr = pData;
+    hsmartcard->TxXferSize = Size;
+    hsmartcard->TxXferCount = Size;
+
+    /* Disable the Peripheral first to update mode for TX master */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    /* Disable Rx, enable Tx */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
+    SET_BIT(hsmartcard->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST);
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
+    
+    /* Enable the Peripheral */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    /* Enable the SMARTCARD Error Interrupt: (Frame error) */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+    /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in interrupt mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be received.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Rx process is not already ongoing */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->RxState   = HAL_SMARTCARD_STATE_BUSY_RX;
+
+    hsmartcard->pRxBuffPtr = pData;
+    hsmartcard->RxXferSize = Size;
+    hsmartcard->RxXferCount = Size;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE| USART_CR1_RXNEIE);
+
+    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in DMA mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be sent.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Tx process is not already ongoing */
+  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->pTxBuffPtr = pData;
+    hsmartcard->TxXferSize = Size;
+    hsmartcard->TxXferCount = Size;
+
+    /* Disable the Peripheral first to update mode for TX master */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    /* Disable Rx, enable Tx */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
+    SET_BIT(hsmartcard->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST);
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
+    
+    /* Enable the Peripheral */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+    /* Set the SMARTCARD error callback */
+    hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Set the DMA abort callback */
+    hsmartcard->hdmatx->XferAbortCallback = NULL;
+
+    /* Enable the SMARTCARD transmit DMA channel */
+    HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, Size);
+
+    /* Clear the TC flag in the ICR register */
+    CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    /* Enable the UART Error Interrupt: (Frame error) */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the SMARTCARD associated USART CR3 register */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in DMA mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be received.
+  * @note   The SMARTCARD-associated USART parity is enabled (PCE = 1),
+  *         the received data contain the parity bit (MSB position).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Rx process is not already ongoing */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsmartcard);
+
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    hsmartcard->RxState   = HAL_SMARTCARD_STATE_BUSY_RX;
+
+    hsmartcard->pRxBuffPtr = pData;
+    hsmartcard->RxXferSize = Size;
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+    /* Set the SMARTCARD DMA error callback */
+    hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Set the DMA abort callback */
+    hsmartcard->hdmarx->XferAbortCallback = NULL;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, Size);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsmartcard);
+
+    /* Enable the UART Parity Error Interrupt */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
+
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the SMARTCARD associated USART CR3 register */
+    SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Abort ongoing transfers (blocking mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Tx and Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+  /* Disable the SMARTCARD DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
+    if(hsmartcard->hdmatx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hsmartcard->hdmatx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hsmartcard->hdmatx);
+    }
+  }
+
+  /* Disable the SMARTCARD DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
+    if(hsmartcard->hdmarx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hsmartcard->hdmarx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hsmartcard->hdmarx);
+    }
+  }
+
+  /* Reset Tx and Rx transfer counters */
+  hsmartcard->TxXferCount = 0U; 
+  hsmartcard->RxXferCount = 0U; 
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+  /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
+  hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  /* Reset Handle ErrorCode to No Error */
+  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Transmit transfer (blocking mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Tx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable TXEIE and TCIE interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+  /* Check if a receive process is ongoing or not. If not disable ERR IT */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error) */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+  }
+
+  /* Disable the SMARTCARD DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
+    if(hsmartcard->hdmatx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hsmartcard->hdmatx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hsmartcard->hdmatx);
+    }
+  }
+
+  /* Reset Tx transfer counter */
+  hsmartcard->TxXferCount = 0U; 
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
+
+  /* Restore hsmartcard->gState to Ready */
+  hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Receive transfer (blocking mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+
+  /* Check if a Transmit process is ongoing or not. If not disable ERR IT */
+  if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error) */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+  }
+
+  /* Disable the SMARTCARD DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
+    if(hsmartcard->hdmarx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hsmartcard->hdmarx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hsmartcard->hdmarx);
+    }
+  }
+
+  /* Reset Rx transfer counter */
+  hsmartcard->RxXferCount = 0U; 
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+  /* Restore hsmartcard->RxState to Ready */
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing transfers (Interrupt mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Tx and Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  uint32_t abortcplt = 1U;
+  
+  /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+  /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, DMA Abort complete callbacks should be initialised
+     before any call to DMA Abort functions */
+  /* DMA Tx Handle is valid */
+  if(hsmartcard->hdmatx != NULL)
+  {
+    /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled.
+       Otherwise, set it to NULL */
+    if(HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+    {
+      hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback;
+    }
+    else
+    {
+      hsmartcard->hdmatx->XferAbortCallback = NULL;
+    }
+  }
+  /* DMA Rx Handle is valid */
+  if(hsmartcard->hdmarx != NULL)
+  {
+    /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled.
+       Otherwise, set it to NULL */
+    if(HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+    {
+      hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback;
+    }
+    else
+    {
+      hsmartcard->hdmarx->XferAbortCallback = NULL;
+    }
+  }
+  
+  /* Disable the SMARTCARD DMA Tx request if enabled */
+  if(HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+  {
+    /* Disable DMA Tx at UART level */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
+    if(hsmartcard->hdmatx != NULL)
+    {
+      /* SMARTCARD Tx DMA Abort callback has already been initialised : 
+         will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
+
+      /* Abort DMA TX */
+      if(HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
+      {
+        hsmartcard->hdmatx->XferAbortCallback = NULL;
+      }
+      else
+      {
+        abortcplt = 0U;
+      }
+    }
+  }
+
+  /* Disable the SMARTCARD DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
+    if(hsmartcard->hdmarx != NULL)
+    {
+      /* SMARTCARD Rx DMA Abort callback has already been initialised : 
+         will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
+
+      /* Abort DMA RX */
+      if(HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
+      {
+        hsmartcard->hdmarx->XferAbortCallback = NULL;
+        abortcplt = 1U;
+      }
+      else
+      {
+        abortcplt = 0U;
+      }
+    }
+  }
+
+  /* if no DMA abort complete callback execution is required => call user Abort Complete callback */
+  if (abortcplt == 1U)
+  {
+    /* Reset Tx and Rx transfer counters */
+    hsmartcard->TxXferCount = 0U; 
+    hsmartcard->RxXferCount = 0U;
+
+    /* Reset errorCode */
+    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+    /* Clear the Error flags in the ICR register */
+    __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+    /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
+    hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+    hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Transmit transfer (Interrupt mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Tx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable TXEIE and TCIE interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+  /* Check if a receive process is ongoing or not. If not disable ERR IT */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error) */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+  }
+
+  /* Disable the SMARTCARD DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
+    if(hsmartcard->hdmatx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback : 
+         will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
+      hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback;
+
+      /* Abort DMA TX */
+      if(HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
+      {
+        /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
+        hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
+      }
+    }
+    else
+    {
+      /* Reset Tx transfer counter */
+      hsmartcard->TxXferCount = 0U; 
+
+      /* Restore hsmartcard->gState to Ready */
+      hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+      /* As no DMA to be aborted, call directly user Abort complete callback */
+      HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
+    }
+  }
+  else
+  {
+    /* Reset Tx transfer counter */
+    hsmartcard->TxXferCount = 0U; 
+
+    /* Clear the Error flags in the ICR register */
+    __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
+
+    /* Restore hsmartcard->gState to Ready */
+    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Receive transfer (Interrupt mode).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @note   This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable SMARTCARD Interrupts (Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable RTOIE, EOBIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+
+  /* Check if a Transmit process is ongoing or not. If not disable ERR IT */
+  if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error) */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+  }
+
+  /* Disable the SMARTCARD DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
+    if(hsmartcard->hdmarx != NULL)
+    {
+      /* Set the SMARTCARD DMA Abort callback : 
+         will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
+      hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback;
+
+      /* Abort DMA RX */
+      if(HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
+      {
+        /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
+        hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
+      }
+    }
+    else
+    {
+      /* Reset Rx transfer counter */
+      hsmartcard->RxXferCount = 0U; 
+
+      /* Clear the Error flags in the ICR register */
+      __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+      /* Restore hsmartcard->RxState to Ready */
+      hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+      /* As no DMA to be aborted, call directly user Abort complete callback */
+      HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
+    }
+  }
+  else
+  {
+    /* Reset Rx transfer counter */
+    hsmartcard->RxXferCount = 0U; 
+
+    /* Clear the Error flags in the ICR register */
+    __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+    /* Restore hsmartcard->RxState to Ready */
+    hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Handle SMARTCARD interrupt requests.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  uint32_t isrflags   = READ_REG(hsmartcard->Instance->ISR);
+  uint32_t cr1its     = READ_REG(hsmartcard->Instance->CR1);
+  uint32_t cr3its;
+  uint32_t errorflags;
+
+  /* If no error occurs */
+  errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF));
+  if (errorflags == RESET)
+  {
+    /* SMARTCARD in mode Receiver ---------------------------------------------------*/
+    if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+    {
+      SMARTCARD_Receive_IT(hsmartcard);
+      /* Clear RXNE interrupt flag done by reading RDR in SMARTCARD_Receive_IT() */
+      return;
+    }
+  }  
+
+  /* If some errors occur */
+  cr3its = READ_REG(hsmartcard->Instance->CR3);
+  if(   (errorflags != RESET) 
+     && (    ((cr3its & USART_CR3_EIE) != RESET)
+          || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != RESET)) )
+  {
+    /* SMARTCARD parity error interrupt occurred -------------------------------------*/
+    if(((isrflags & USART_ISR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+    {
+      __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF);
+
+      hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+    }
+
+    /* SMARTCARD frame error interrupt occurred --------------------------------------*/
+    if(((isrflags & USART_ISR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+    {
+      __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF);
+
+      hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+    }
+
+    /* SMARTCARD noise error interrupt occurred --------------------------------------*/
+    if(((isrflags & USART_ISR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+    {
+      __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF);
+
+      hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
+    }
+
+    /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/
+    if(((isrflags & USART_ISR_ORE) != RESET) &&
+       (((cr1its & USART_CR1_RXNEIE) != RESET) || ((cr3its & USART_CR3_EIE) != RESET)))
+    {
+      __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF);
+
+      hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
+    }
+
+    /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/
+    if(((isrflags & USART_ISR_RTOF) != RESET) && ((cr1its & USART_CR1_RTOIE) != RESET))
+    {
+      __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF);
+
+      hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO;
+    }
+
+    /* Call SMARTCARD Error Call back function if need be --------------------------*/
+    if(hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+    {
+      /* SMARTCARD in mode Receiver ---------------------------------------------------*/
+      if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+      {
+        SMARTCARD_Receive_IT(hsmartcard);
+      }
+
+      /* If Error is to be considered as blocking :
+          - Receiver Timeout error in Reception
+          - Overrun error in Reception
+          - any error occurs in DMA mode reception
+      */
+      if (   ((hsmartcard->ErrorCode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != RESET)
+          || (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)))
+      {  
+        /* Blocking error : transfer is aborted
+           Set the SMARTCARD state ready to be able to start again the process,
+           Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+        SMARTCARD_EndRxTransfer(hsmartcard);
+
+        /* Disable the SMARTCARD DMA Rx request if enabled */
+        if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
+        {
+          CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+          /* Abort the SMARTCARD DMA Rx channel */
+          if(hsmartcard->hdmarx != NULL)
+          {
+            /* Set the SMARTCARD DMA Abort callback : 
+               will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
+            hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
+
+            /* Abort DMA RX */
+            if(HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
+            {
+              /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
+              hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
+            }
+          }
+          else
+          {
+            /* Call user error callback */
+            HAL_SMARTCARD_ErrorCallback(hsmartcard);
+          }
+        }
+        else
+        {
+          /* Call user error callback */
+          HAL_SMARTCARD_ErrorCallback(hsmartcard);
+        }
+      }
+      /* other error type to be considered as blocking :
+          - Frame error in Transmission
+      */
+      else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) && ((hsmartcard->ErrorCode & HAL_SMARTCARD_ERROR_FE) != RESET))
+      {
+        /* Blocking error : transfer is aborted
+           Set the SMARTCARD state ready to be able to start again the process,
+           Disable Tx Interrupts, and disable Tx DMA request, if ongoing */
+        SMARTCARD_EndTxTransfer(hsmartcard);
+
+        /* Disable the SMARTCARD DMA Tx request if enabled */
+        if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
+        {
+          CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+          /* Abort the SMARTCARD DMA Tx channel */
+          if(hsmartcard->hdmatx != NULL)
+          {
+            /* Set the SMARTCARD DMA Abort callback : 
+               will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
+            hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
+
+            /* Abort DMA TX */
+            if(HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
+            {
+              /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
+              hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
+            }
+          }
+          else
+          {
+            /* Call user error callback */
+            HAL_SMARTCARD_ErrorCallback(hsmartcard);
+          }
+        }
+        else
+        {
+          /* Call user error callback */
+          HAL_SMARTCARD_ErrorCallback(hsmartcard);
+        }
+      }
+      else
+      {
+        /* Non Blocking error : transfer could go on. 
+           Error is notified to user through user error callback */
+        HAL_SMARTCARD_ErrorCallback(hsmartcard);
+        hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+      }
+    }
+    return;
+
+  } /* End if some error occurs */
+
+  /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/
+  if(((isrflags & USART_ISR_EOBF) != RESET) && ((cr1its & USART_CR1_EOBIE) != RESET))
+  {
+    hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+    __HAL_UNLOCK(hsmartcard);
+    HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+    /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
+     * to be available during HAL_SMARTCARD_RxCpltCallback() processing */
+    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF);
+    return;
+  }
+
+  /* SMARTCARD in mode Transmitter ------------------------------------------------*/
+  if(((isrflags & USART_ISR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+  {
+    SMARTCARD_Transmit_IT(hsmartcard);
+    return;
+  }
+
+  /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_TC) != RESET) &&(__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_TC) != RESET))
+  {
+    SMARTCARD_EndTransmit_IT(hsmartcard);
+    return;
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  SMARTCARD error callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_ErrorCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  SMARTCARD Abort Complete callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  SMARTCARD Abort Complete callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  SMARTCARD Abort Receive Complete callback.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsmartcard);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   SMARTCARD State and Errors functions
+  *
+@verbatim
+  ==============================================================================
+                  ##### Peripheral State and Errors functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to return the State of SmartCard
+    handle and also return Peripheral Errors occurred during communication process
+     (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state
+         of the SMARTCARD peripheral.
+     (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during
+         communication.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SMARTCARD handle state.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval SMARTCARD handle state
+  */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Return SMARTCARD handle state */
+  uint32_t temp1= 0x00U, temp2 = 0x00U;
+  temp1 = hsmartcard->gState;
+  temp2 = hsmartcard->RxState;
+
+  return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+  * @brief  Return the SMARTCARD handle error code.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval SMARTCARD handle Error Code
+*/
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  return hsmartcard->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+  * @{
+  */
+
+/**
+  * @brief Configure the SMARTCARD associated USART peripheral.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  uint32_t tmpreg                          = 0x00000000U;
+  SMARTCARD_ClockSourceTypeDef clocksource = SMARTCARD_CLOCKSOURCE_UNDEFINED;
+  HAL_StatusTypeDef ret                    = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
+  assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate));
+  assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength));
+  assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits));
+  assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity));
+  assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode));
+  assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity));
+  assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase));
+  assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit));
+  assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling));
+  assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable));
+  assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable));
+  assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount));
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
+   * Oversampling is forced to 16 (OVER8 = 0).
+   * Configure the Parity and Mode:
+   *  set PS bit according to hsmartcard->Init.Parity value
+   *  set TE and RE bits according to hsmartcard->Init.Mode value */
+  tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode;
+  tmpreg |= (uint32_t) hsmartcard->Init.WordLength;
+  MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR2 Configuration -----------------------*/
+  tmpreg = hsmartcard->Init.StopBits;
+  /* Synchronous mode is activated by default */
+  tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity;
+  tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit;
+  tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable;
+  MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Configure
+   * - one-bit sampling method versus three samples' majority rule
+   *   according to hsmartcard->Init.OneBitSampling
+   * - NACK transmission in case of parity error according
+   *   to hsmartcard->Init.NACKEnable
+   * - autoretry counter according to hsmartcard->Init.AutoRetryCount     */
+  tmpreg =  (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable;
+  tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << SMARTCARD_CR3_SCARCNT_LSB_POS);
+  MODIFY_REG(hsmartcard->Instance-> CR3,USART_CR3_FIELDS, tmpreg);
+
+  /*-------------------------- USART GTPR Configuration ----------------------*/
+  tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << SMARTCARD_GTPR_GT_LSB_POS));
+  MODIFY_REG(hsmartcard->Instance->GTPR, (USART_GTPR_GT|USART_GTPR_PSC), tmpreg);
+
+  /*-------------------------- USART RTOR Configuration ----------------------*/
+  tmpreg =   ((uint32_t)hsmartcard->Init.BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS);
+  if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE)
+  {
+    assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
+    tmpreg |=  (uint32_t) hsmartcard->Init.TimeOutValue;
+  }
+  MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO|USART_RTOR_BLEN), tmpreg);
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource);
+  switch (clocksource)
+  {
+    case SMARTCARD_CLOCKSOURCE_PCLK1:
+      hsmartcard->Instance->BRR = (uint16_t)((HAL_RCC_GetPCLK1Freq() + (hsmartcard->Init.BaudRate/2U)) / hsmartcard->Init.BaudRate);
+      break;
+    case SMARTCARD_CLOCKSOURCE_HSI:
+      hsmartcard->Instance->BRR = (uint16_t)((HSI_VALUE + (hsmartcard->Init.BaudRate/2U)) / hsmartcard->Init.BaudRate);
+      break;
+    case SMARTCARD_CLOCKSOURCE_SYSCLK:
+      hsmartcard->Instance->BRR = (uint16_t)((HAL_RCC_GetSysClockFreq() + (hsmartcard->Init.BaudRate/2U)) / hsmartcard->Init.BaudRate);
+      break;
+    case SMARTCARD_CLOCKSOURCE_LSE:
+      hsmartcard->Instance->BRR = (uint16_t)((LSE_VALUE + (hsmartcard->Init.BaudRate/2U)) / hsmartcard->Init.BaudRate);
+      break;
+    case SMARTCARD_CLOCKSOURCE_UNDEFINED:
+    default:
+      ret = HAL_ERROR;
+      break;
+  }
+
+  return ret;
+}
+
+
+/**
+  * @brief Configure the SMARTCARD associated USART peripheral advanced features.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Check whether the set of advanced features to configure is properly set */
+  assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit));
+
+  /* if required, configure TX pin active level inversion */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert));
+    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert);
+  }
+
+  /* if required, configure RX pin active level inversion */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert));
+    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert);
+  }
+
+  /* if required, configure data inversion */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert));
+    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert);
+  }
+
+  /* if required, configure RX/TX pins swap */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap));
+    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap);
+  }
+
+  /* if required, configure RX overrun detection disabling */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+  {
+    assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable));
+    MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable);
+  }
+
+  /* if required, configure DMA disabling on reception error */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError));
+    MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError);
+  }
+
+  /* if required, configure MSB first on communication line */
+  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst));
+    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst);
+  }
+
+}
+
+/**
+  * @brief Check the SMARTCARD Idle State.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  uint32_t tickstart = 0U;
+
+  /* Initialize the SMARTCARD ErrorCode */
+  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+  /* Init tickstart for timeout managment*/
+  tickstart = HAL_GetTick();
+
+  /* TEACK and REACK bits in ISR are checked only when available (not available on all F0 devices).
+     Bits are defined for some specific devices, and are available only for UART instances supporting WakeUp from Stop Mode feature. 
+  */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+  if (IS_UART_WAKEUP_FROMSTOP_INSTANCE(hsmartcard->Instance))
+  {
+    /* Check if the Transmitter is enabled */
+    if((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+    {
+      /* Wait until TEACK flag is set */
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK)
+      {
+        /* Timeout occurred */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Check if the Receiver is enabled */
+    if((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+    {
+      /* Wait until REACK flag is set */
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK)
+      {
+        /* Timeout occurred */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+  /* Initialize the SMARTCARD states */
+  hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsmartcard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle SMARTCARD Communication Timeout.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @param  Flag Specifies the SMARTCARD flag to check.
+  * @param  Status The new Flag status (SET or RESET).
+  * @param  Tickstart Tick start value
+  * @param  Timeout Timeout duration.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+  /* Wait until flag is set */
+  while((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+      {
+        /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+        CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+        CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+        hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+        hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hsmartcard);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *               the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+  /* At end of Tx process, restore hsmartcard->gState to Ready */
+  hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+}
+
+
+/**
+  * @brief  End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *               the configuration information for the specified SMARTCARD module.
+  * @retval None
+  */
+static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+  /* At end of Rx process, restore hsmartcard->RxState to Ready */
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+}
+
+
+/**
+  * @brief  DMA SMARTCARD transmit process complete callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef*)(hdma->Parent);
+  hsmartcard->TxXferCount = 0U;
+
+  /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+  in the SMARTCARD associated USART CR3 register */
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
+
+  /* Enable the SMARTCARD Transmit Complete Interrupt */
+  __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+}
+
+/**
+  * @brief  DMA SMARTCARD receive process complete callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef*)(hdma->Parent);
+  hsmartcard->RxXferCount = 0U;
+
+  /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+
+  /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+     in the SMARTCARD associated USART CR3 register */
+  CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
+
+  /* At end of Rx process, restore hsmartcard->RxState to Ready */
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+}
+
+/**
+  * @brief  DMA SMARTCARD communication error callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef*)(hdma->Parent);
+
+  /* Stop SMARTCARD DMA Tx request if ongoing */
+  if (  (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
+      &&(HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) )
+  {
+    hsmartcard->TxXferCount = 0U;
+    SMARTCARD_EndTxTransfer(hsmartcard);
+  }
+
+  /* Stop SMARTCARD DMA Rx request if ongoing */
+  if (  (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
+      &&(HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) )
+  {
+    hsmartcard->RxXferCount = 0U;
+    SMARTCARD_EndRxTransfer(hsmartcard);
+  }
+
+  hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
+  HAL_SMARTCARD_ErrorCallback(hsmartcard);
+}
+
+/**
+  * @brief  DMA SMARTCARD communication abort callback, when initiated by HAL services on Error
+  *         (To be called at end of DMA Abort procedure following error occurrence).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef*)(hdma->Parent);
+  hsmartcard->RxXferCount = 0U;
+  hsmartcard->TxXferCount = 0U;
+
+  HAL_SMARTCARD_ErrorCallback(hsmartcard);
+}
+
+/**
+  * @brief  DMA SMARTCARD Tx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Tx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Rx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef* )(hdma->Parent);
+  
+  hsmartcard->hdmatx->XferAbortCallback = NULL;
+
+  /* Check if an Abort process is still ongoing */
+  if(hsmartcard->hdmarx != NULL)
+  {
+    if(hsmartcard->hdmarx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+  
+  /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
+  hsmartcard->TxXferCount = 0U;
+  hsmartcard->RxXferCount = 0U;
+
+  /* Reset errorCode */
+  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+  /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
+  hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
+}
+
+
+/**
+  * @brief  DMA SMARTCARD Rx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Rx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Tx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef* )(hdma->Parent);
+  
+  hsmartcard->hdmarx->XferAbortCallback = NULL;
+
+  /* Check if an Abort process is still ongoing */
+  if(hsmartcard->hdmatx != NULL)
+  {
+    if(hsmartcard->hdmatx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+  
+  /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
+  hsmartcard->TxXferCount = 0U;
+  hsmartcard->RxXferCount = 0U;
+
+  /* Reset errorCode */
+  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+  /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
+  hsmartcard->gState  = HAL_SMARTCARD_STATE_READY;
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
+}
+
+
+/**
+  * @brief  DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to
+  *         HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer)
+  *         (This callback is executed at end of DMA Tx Abort procedure following user abort request,
+  *         and leads to user Tx Abort Complete callback execution).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = (SMARTCARD_HandleTypeDef*)(hdma->Parent);
+
+  hsmartcard->TxXferCount = 0U;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
+
+  /* Restore hsmartcard->gState to Ready */
+  hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
+}
+
+/**
+  * @brief  DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to
+  *         HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer)
+  *         (This callback is executed at end of DMA Rx Abort procedure following user abort request,
+  *         and leads to user Rx Abort Complete callback execution).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )(hdma->Parent);
+
+  hsmartcard->RxXferCount = 0U;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
+
+  /* Restore hsmartcard->RxState to Ready */
+  hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
+}
+
+/**
+  * @brief Send an amount of data in non-blocking mode.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for the specified SMARTCARD module.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Check that a Tx process is ongoing */
+  if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
+  {
+    if(hsmartcard->TxXferCount == 0U)
+    {
+      /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
+      CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE);
+
+      /* Enable the SMARTCARD Transmit Complete Interrupt */
+      __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+
+      return HAL_OK;
+    }
+    else
+    {
+      hsmartcard->Instance->TDR = (*hsmartcard->pTxBuffPtr++ & (uint8_t)0xFFU);
+      hsmartcard->TxXferCount--;
+
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wrap up transmission in non-blocking mode.
+  * @param  hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                    the configuration information for the specified SMARTCARD module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Disable the SMARTCARD Transmit Complete Interrupt */
+  __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
+
+  /* Check if a receive process is ongoing or not. If not disable ERR IT */
+  if(hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
+  {
+    /* Disable the SMARTCARD Error Interrupt: (Frame error) */
+    CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+  }
+
+  /* Re-enable Rx at end of transmission if initial mode is Rx/Tx */
+  if(hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
+  {
+    /* Disable the Peripheral first to update modes */
+    CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
+    /* Enable the Peripheral */
+    SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
+  }
+  
+  /* Tx process is ended, restore hsmartcard->gState to Ready */
+  hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
+
+  HAL_SMARTCARD_TxCpltCallback(hsmartcard);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode.
+  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *                the configuration information for the specified SMARTCARD module.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_SMARTCARD_Receive_IT().
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
+{
+  /* Check that a Rx process is ongoing */
+  if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
+  {
+    *hsmartcard->pRxBuffPtr++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFFU);
+
+    if(--hsmartcard->RxXferCount == 0U)
+    {
+      CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE);
+
+      /* Check if a transmit process is ongoing or not. If not disable ERR IT */
+      if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
+      {
+        /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+        CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
+      }
+
+      /* Disable the SMARTCARD Parity Error Interrupt */
+      CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
+
+      hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
+
+      HAL_SMARTCARD_RxCpltCallback(hsmartcard);
+
+      return HAL_OK;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    /* Clear RXNE interrupt flag */
+    __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
+
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/